RCCrawler Forums

YoUnG_vErSiOn · 12-21-2011, 04:05 PM

Here Brian.

Fuel cell will fill the gap...and hide the battery. and it would only be proper for the battery to go inside the fuel cell.

YoUnG_vErSiOn · 12-23-2011, 03:26 AM

And for my next trick...hahaha
it was just bent for mockup, i wanted to see if it even looked ok. if i decide to move forward with this, it'll need struts and a skid. i think it looks alright. BTW: i needed to use the shackles in order to clear the bumper...i may change the bumper so it looks more true to scale.

Big Mike · 12-23-2011, 08:10 AM

I'm really digging the longer wheelbase and how you cut the back.

Tubework looks great as well.

It's just begging to be set up with 4-wheel steering.

This is looking really good so far!

Tommy R · 12-26-2011, 09:16 PM

I was wondering when someone would use Wraith axles to make a "one ton Jeep" out of a 1/6th scale rig. Great job!

YoUnG_vErSiOn · 01-01-2012, 04:32 AM

Just about finished with my 1.9 build...so for Brian and Reid. Here we go!

stroker613 · 01-21-2012, 06:59 PM

I think I might do this to my wraith

YoUnG_vErSiOn · 01-30-2012, 04:56 PM

Sorry the Wreep got put on the back burner for a bit...ill be right back!

ROBERT8871 · 02-06-2012, 09:46 PM

the best looking willys i seen yet . nice can't wait to see it done.

YoUnG_vErSiOn · 02-07-2012, 08:14 PM

Thank you, now that the Trailfinder 2 is complete, Wreep will finally get some much needed attention.

YoUnG_vErSiOn · 02-07-2012, 10:45 PM

Name: IMG-20120207-01447.jpg
Views: 1174
Size: 55.4 KB

Name: IMG-20120207-01446.jpg
Views: 1040
Size: 63.1 KB

Name: IMG-20120207-01450.jpg
Views: 1039
Size: 60.9 KB

Name: IMG-20120207-01445.jpg
Views: 1004
Size: 52.7 KB

something to hold you over till i really get into this thing.

RusT808 · 02-08-2012, 12:19 AM

Quote:

Originally Posted by young_version

Attachment 186337
something to hold you over till i really get into this thing.

Very cool pic, almost looks 1:1.

QUICKSAND · 02-23-2012, 03:28 AM

Nice work Kila

That's one good looking flat fender! Great stance, nice tube work... seeing this kind of thing is going to make me have to start building something.

demonoid369 · 02-23-2012, 04:29 AM

What is that your using to create the pan hard mount?

Rockpiledriver · 02-23-2012, 10:55 AM

Bout time...

RusT808 · 02-23-2012, 11:16 AM

I seen the W-reep and the suspension cycles sooo smooth.

YoUnG_vErSiOn · 02-23-2012, 11:19 AM

Quote:

Originally Posted by Rockpiledriver

Bout time...

haha, its getting 70% of my A.D.D. building attention right now, but it'l get done real soon.

Quote:

Originally Posted by demonoid369

What is that your using to create the pan hard mount?

LOL, an OG bruiser shackle hacked up and welded on, ill take a pics and post it for you.

Quote:

Originally Posted by QUICKSAND

Nice work Kila

That's one good looking flat fender! Great stance, nice tube work... seeing this kind of thing is going to make me have to start building something.

thanks Neil, glad you like it!

YoUnG_vErSiOn · 02-23-2012, 11:27 AM

Name: IMG-20120223-01816.jpg
Views: 917
Size: 63.1 KB

Name: IMG-20120223-01819.jpg
Views: 929
Size: 61.2 KB

Name: IMG-20120223-01820.jpg
Views: 921
Size: 46.8 KB

Name: IMG-20120223-01817.jpg
Views: 905
Size: 55.8 KB

Name: IMG-20120223-01814.jpg
Views: 917
Size: 49.8 KB

lol its rusting from sitting so long.

YoUnG_vErSiOn · 02-27-2012, 02:41 AM

Name: IMG-20120226-01870.jpg
Views: 970
Size: 72.2 KB

this was a major FRICKIN pain in the a$$!!i had to chop, grind, flip, melt, Tenax...grind some more..cut andSuperglue..LOL but now its a '58. Reid, this is insane..if you want one ill totally do it for you.

demonoid369 · 02-27-2012, 03:24 PM

My apologize I meant the axle mount for the pan hard,

YoUnG_vErSiOn · 02-28-2012, 02:08 PM

No prob, VP made it. the kit was for the wraith...however rc4wd's kit looks like it would've been a better choice. much more arts and adaptability for my application. unfortunately..it was available when i originally got the mount.. BTW: the Wreep is getting some one-off buckets made especially for this build...you'll see what I'm talking about soon...It'll be SICK!

12-21-2011, 04:05 PM	#41
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! Here Brian. Fuel cell will fill the gap...and hide the battery. and it would only be proper for the battery to go inside the fuel cell. Last edited by YoUnG_vErSiOn; 12-21-2011 at 04:31 PM.

12-23-2011, 03:26 AM	#42
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! And for my next trick...hahaha it was just bent for mockup, i wanted to see if it even looked ok. if i decide to move forward with this, it'll need struts and a skid. i think it looks alright. BTW: i needed to use the shackles in order to clear the bumper...i may change the bumper so it looks more true to scale. Attached Images

12-23-2011, 08:10 AM	#43
Big Mike I wanna be Dave Join Date: Oct 2006 Location: Martinsburg WV Posts: 2,781	Re: Wr-eep! I'm really digging the longer wheelbase and how you cut the back. Tubework looks great as well. It's just begging to be set up with 4-wheel steering. This is looking really good so far! Last edited by Big Mike; 12-23-2011 at 08:13 AM.

12-26-2011, 09:16 PM	#44
Tommy R I wanna be Dave Join Date: Aug 2008 Location: Austin, TX, USA Posts: 4,273	Re: Wr-eep! I was wondering when someone would use Wraith axles to make a "one ton Jeep" out of a 1/6th scale rig. Great job!

01-01-2012, 04:32 AM	#45
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! Just about finished with my 1.9 build...so for Brian and Reid. Here we go!

01-21-2012, 06:59 PM	#46
stroker613 Quarry Creeper Join Date: Jan 2011 Location: Detroit and Denver Posts: 344	Re: Wr-eep! I think I might do this to my wraith

01-30-2012, 04:56 PM	#47
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! Sorry the Wreep got put on the back burner for a bit...ill be right back!

02-06-2012, 09:46 PM	#48
ROBERT8871 Newbie Join Date: Jan 2009 Location: riverside Posts: 4	Re: Wr-eep! the best looking willys i seen yet . nice can't wait to see it done.

02-07-2012, 08:14 PM	#49
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! Thank you, now that the Trailfinder 2 is complete, Wreep will finally get some much needed attention.

02-07-2012, 10:45 PM	#50
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! something to hold you over till i really get into this thing.

02-23-2012, 03:28 AM	#52
QUICKSAND Rock Stacker Join Date: Jul 2008 Location: way behind Posts: 94	Re: Wr-eep! Nice work Kila That's one good looking flat fender! Great stance, nice tube work... seeing this kind of thing is going to make me have to start building something.

02-23-2012, 04:29 AM	#53
demonoid369 RCC Addict Join Date: Oct 2007 Location: gervais Posts: 1,715	What is that your using to create the pan hard mount? Attached Images

02-23-2012, 10:55 AM	#54
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 5,027	Re: Wr-eep! Bout time...

02-23-2012, 11:16 AM	#55
RusT808 Quarry Creeper Join Date: Dec 2009 Location: Honolulu Posts: 428	Re: Wr-eep! I seen the W-reep and the suspension cycles sooo smooth.

02-23-2012, 11:27 AM	#57
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! lol its rusting from sitting so long.

Sponsored Links

02-27-2012, 02:41 AM	#58
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! this was a major FRICKIN pain in the a$$!!i had to chop, grind, flip, melt, Tenax...grind some more..cut andSuperglue..LOL but now its a '58. Reid, this is insane..if you want one ill totally do it for you.

02-27-2012, 03:24 PM	#59
demonoid369 RCC Addict Join Date: Oct 2007 Location: gervais Posts: 1,715	My apologize I meant the axle mount for the pan hard,

02-28-2012, 02:08 PM	#60
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Wr-eep! No prob, VP made it. the kit was for the wraith...however rc4wd's kit looks like it would've been a better choice. much more arts and adaptability for my application. unfortunately..it was available when i originally got the mount.. BTW: the Wreep is getting some one-off buckets made especially for this build...you'll see what I'm talking about soon...It'll be SICK!

RCCrawler Forums

Thread: Wr-eep!