|
| LinkBack | Thread Tools | Display Modes |
06-28-2006, 06:26 PM | #1 |
Pebble Pounder Join Date: Jul 2005 Location: Greece
Posts: 154
| 1/8 scale F-150 Build Pictures
TLT axles Pan car rear end with a GD 600 as the transmission Stampede transmission as a transfer case Futaba hi torque servo Dynamite Tazer 15T ESC 6 cell GP 3300 battery HPI 2.2 rims Lunch Box tires (some pics show TLT tires) Parma 1/8 scale 2004 Ford F150 body Tamiya Copper Metallic paint Steel bar for frame rails Cheep can of flat black paint for frame Stainless Steel rod for links JR R1 pro radio Wheelbase - 13.5 My goal was to build as much of the truck as possible from what I had already. Also I wanted the truck to look and drive similar to a real truck. In addition I did not want the wheels to stick out to far. All I had to buy was the body, paint, steel bar and the Stainless rod. Well this is what I have come up with: Test Fit: Frame painted then assembled: Axles, Links and shocks added: Electronics added: Body set on first time: First time outdoors (body mounts corrected).: First thoughts: It needs softer springs Turning radius is to wide Torque snaps drive shafts like twigs Needs tonneau cover Tranny to Transfer case works better than expected. LB tires are super soft and sticky. They grip great in dirt and on the lawn. It has potential |
Sponsored Links | |
06-28-2006, 06:42 PM | #2 |
Newbie Join Date: Aug 2005 Location: cherry point north carolina
Posts: 41
|
clean looking build, but those LB tires just look a hair too small, i like it though looks like its got good potential |
06-28-2006, 06:49 PM | #3 |
I wanna be Dave Join Date: Jan 2006 Location: Henderson/Las Vegas, NV
Posts: 5,032
|
personally, lower it a little bit, but different tires on it. but it looks great man!
|
06-28-2006, 06:56 PM | #4 | |
Pebble Pounder Join Date: Jul 2005 Location: Greece
Posts: 154
| Quote:
| |
06-28-2006, 08:38 PM | #5 |
RCC Addict Join Date: May 2006 Location: Roseville
Posts: 1,469
|
Doubt it would work, but two of the gear reductions and a smaller spur?
|
06-28-2006, 08:41 PM | #6 |
Quarry Creeper Join Date: Mar 2006 Location: the great brown north=(WI)
Posts: 352
|
lower the body and get swamp dogs and she's golden. really like the moto mount and t case set up
|
06-28-2006, 09:29 PM | #7 |
Rock Crawler Join Date: Sep 2004 Location: a place of settlement, activity, or residence.
Posts: 842
|
Never thought I would see pan car parts on a crawler! Very inovative. Do you have any wheel speed at all?
|
06-28-2006, 10:47 PM | #8 | |
Pebble Pounder Join Date: Jul 2005 Location: Greece
Posts: 154
| Quote:
I think I might drop the spur to an 85 or 90. I do not have enough wheel speed. I do have enough torque to snap both drive shafts like twigs. I thought of a second GD 600 and using a small spur but then the motor will rub on the body. I plan to gradually add the accessories once I get all of the necessities worked out. | |
06-29-2006, 04:25 PM | #9 | |
Rock Stacker Join Date: Mar 2006 Location: scappoose
Posts: 50
| Quote:
http://froogle.google.com/froogle?q=...en&btnG=Search Tanner | |
07-11-2006, 06:50 PM | #10 |
Pebble Pounder Join Date: Jul 2005 Location: Greece
Posts: 154
| Update on progress
Here is an update to my progress. I added the tonneau cover (still need to color the wight edge of the vinyl black.) Lowered the body. Used a smaller spur gear (added wheel spin). Mounted Imex G-Hawgs without the foam. Filled portion of drive shafts with epoxy (only left enough of each empty to allow for the needed sliding affect. Results: The lack of foams make up for the stiff springs. Front tires hit the upper links when turning. Turning radius still to wide. G-Hawgs have great grip. Need to run the antenna differently (range is to short). Drive shafts no-longer break like twigs. Rear one does pop out of the joint when breaks are abused repeatedly or when truck is 'rocked' back and forth. |
07-11-2006, 06:56 PM | #11 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
steal yokes and then the truck would be bullut proof on rocks
|
07-11-2006, 07:03 PM | #12 |
Quarry Creeper Join Date: Jan 2006 Location: Jonesboro, TN
Posts: 442
|
lookin good man. Is there any way possible to lower that body another 1/2in or so? It would really look scale then. Or try running larger tires like IMEX All-T's or Red Rocks to make up for it. Do you have any ideas on getting more turning radius yet?
|
07-12-2006, 05:44 PM | #13 | |
Pebble Pounder Join Date: Jul 2005 Location: Greece
Posts: 154
| Quote:
| |
05-10-2007, 06:45 PM | #14 |
Pebble Pounder Join Date: Dec 2006 Location: Raleigh
Posts: 120
|
allI see are Xs, no pics.
|
05-10-2007, 06:47 PM | #15 |
RCC Addict Join Date: Aug 2005 Location: VARCOR
Posts: 1,826
| |
05-18-2007, 12:21 PM | #16 |
Pebble Pounder Join Date: Dec 2006 Location: Raleigh
Posts: 120
|
yeah, I'm ok. sorry |
| |