|
| LinkBack | Thread Tools | Display Modes |
10-28-2019, 03:31 AM | #41 | |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle Quote:
Tapatalk CLT-AL00 | |
Sponsored Links | |
10-28-2019, 06:41 PM | #42 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: question about 1/6 willys axle
My GI Joe Jeep was the old style Hasbro, from the '60's and '70's, so my rear driveshaft was like almost 6" long & 5mm. I used RC4WD Punisher shaft https://store.rc4wd.com/Punisher-Sha...ole_p_815.html You have the newer style Jeep. There's a Sticky at the very top of the page for Large Scale by Zoso Scale Rigs General Tech - Large Scale Rigs at RCCrawler.com and here's a link to RCP Crawlers 1/6 Jeep parts https://rcpcrawlers.com/home.php?cat=51 And here's some to look at from Amain Hobbies https://www.amainhobbies.com/search?s=driveshafts Last edited by Mike Flea; 10-28-2019 at 06:45 PM. |
10-29-2019, 08:16 PM | #43 |
I wanna be Dave Join Date: May 2008 Location: Baltimore
Posts: 4,442
| Re: question about 1/6 willys axle
I used E-revo shafts and yokes. There was a yoke that was made for a 5mm pinion shaft. I have no idea what the Traxxas p/n is anymore.
|
10-30-2019, 07:06 AM | #44 |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle
i did measure and order from taobao, cheap and looks perfect Tapatalk CLT-AL00 |
10-30-2019, 05:38 PM | #45 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: question about 1/6 willys axle |
11-11-2019, 12:51 AM | #46 |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle
welding by a local hardware shop today Tapatalk CLT-AL00 |
11-12-2019, 04:14 AM | #47 |
Rock Stacker Join Date: Sep 2009 Location: Brazil
Posts: 52
| Re: question about 1/6 willys axle
What a nice build. It's my dream to have one of those 1:6 MB, I have a 1:1 that kind of looks like yours, I have been building it for 5 years now. Good luck and I will be following yout thread. I am posting a link so you can see pictures of my 1:1. Rgds Marcelo https://www.facebook.com/photo.php?f...type=3&theater |
11-19-2019, 01:15 AM | #48 | |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle Quote:
Tapatalk CLT-AL00 | |
11-19-2019, 03:23 AM | #49 |
Rock Stacker Join Date: Sep 2009 Location: Brazil
Posts: 52
| Re: question about 1/6 willys axle Its a 1:1 jeep, so it is not in this forum. I placed a Facebook link with the picture of it. They just look the same (mine 1:1 and your 1:6) check it out. https://www.facebook.com/photo.php?f...type=3&theater anyway have a good day. Brgds |
11-19-2019, 05:18 AM | #50 | |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle Quote:
Tapatalk CLT-AL00 | |
11-19-2019, 05:19 AM | #51 |
Newbie Join Date: Mar 2008 Location: hong kong
Posts: 31
| Re: question about 1/6 willys axle
screw welded into bottom of the cage Tapatalk CLT-AL00 |
11-19-2019, 05:35 PM | #52 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: question about 1/6 willys axle
^^ I did the same for mine
|
11-19-2019, 08:45 PM | #53 |
I wanna be Dave Join Date: May 2008 Location: Baltimore
Posts: 4,442
| Re: question about 1/6 willys axle
^^ I tapped the tube ends for M3 at the base mounts on my cage, but it's the same basic idea. It's plenty strong! |
02-01-2020, 11:15 AM | #54 |
Newbie Join Date: Jan 2018 Location: Columbia Falls
Posts: 5
| Re: question about 1/6 willys axle
Looking forward to seeing more on this build.....
|
question about 1/6 willys axle - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about 1/6 Willys Jeep | Synister_Intent | Large Scale Rigs | 4 | 06-30-2016 08:29 PM |
inner axle question | axialnut | Axial SCX-10 | 3 | 10-08-2012 06:07 PM |
axle question, Large scale heavy duty axle? | summervillecrawler | Axial Wraith | 6 | 01-31-2012 01:38 PM |
axle question for the 1:6 willys guru's out there... | brandonwalsh420 | Large Scale Rigs | 3 | 01-27-2012 03:53 PM |
Thread Tools | |
Display Modes | |
| |