RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Large Scale Rigs (http://www.rccrawler.com/forum/large-scale-rigs/)
-   -   1/6th Dragon Willys Jeep (http://www.rccrawler.com/forum/large-scale-rigs/615676-1-6th-dragon-willys-jeep.html)

Ad Lav 02-15-2020 10:24 AM

1/6th Dragon Willys Jeep
 
Thanks for the add guys :)

I recently bought an rc Dragon Willys jeep! I have an unbuilt one I was waiting to convert but this came up at a reasonable price. It’s been converted well but the front axle is causing me issues.

The axles are ARB plastic and the rear was extended using hex axle wideners which fit perfectly with the stock wheels and tyres.
The front was built using two axles to make it wider. Now, this is where the issues lay.

The front axle was bonded together and was showing signs of splitting. I have managed the sleeve the axle and re fit it but I am not 100% happy.

What axle can I replace it with the get the stock look? I read the AR60 is perfect but a bit wider.

I have 240mm pin to pin end measurements.

Photos to follow.

Adam

Ad Lav 02-15-2020 10:30 AM

Re: 1/6th Willys Jeep
 
The day I picked it up :)

https://uploads.tapatalk-cdn.com/202...021523d339.jpg

New figure and tidy up done. Removed flaking decals and dusted/cleaned.

https://uploads.tapatalk-cdn.com/202...5ee224a224.jpg


Sent from my iPhone using Tapatalk

Ad Lav 02-15-2020 10:32 AM

Re: 1/6th Willys Jeep
 
Axle issue...

https://uploads.tapatalk-cdn.com/202...c810aee899.jpg

Fix to axle - works but not happy.

https://uploads.tapatalk-cdn.com/202...99ea1738cf.jpg


Sent from my iPhone using Tapatalk

Mike Flea 02-15-2020 12:31 PM

Re: 1/6th Willys Jeep
 
Looking forward to see how this turns out. Are you building it stock?

Ad Lav 02-15-2020 12:38 PM

Re: 1/6th Willys Jeep
 
Thanks Mike :)

This one is built and running already, my second will be a copy of my real jeep - a 1951 M38.

Adam

58_Willys 02-15-2020 12:44 PM

Re: 1/6th Willys Jeep
 
I had the D60's on my CJ6 orginally. I combined the front and rear housings to make a wider front by gluing them together. The glue seam was made at the point where the clamps were placed, to maintain some strength in the plastic. I used the 12mm extenders on the rear.

I have since converted them to the metal D44's and put the D60's aside, for now. Check out post #26 here...

CJ-6

Check out post #22 in the original thread...here.

Ad Lav 02-15-2020 12:58 PM

Re: 1/6th Willys Jeep
 
Excellent, sleeved inside is a better idea. Nice to see someone else used the same as the guy I got it from :)

I will check out the D44.

58_Willys 02-15-2020 03:52 PM

Re: 1/6th Willys Jeep
 
Quote:

Originally Posted by Ad Lav (Post 5998641)
Thanks Mike :)

This one is built and running already, my second will be a copy of my real jeep - a 1951 M38.

Adam

I also have one waiting in the wings, to be built as a CJ-3B. This one will be a steel frame though. Is your 51 a M38A1 or a straight M38?

Ad Lav 02-16-2020 12:05 AM

Re: 1/6th Willys Jeep
 
Quote:

Originally Posted by 58_Willys (Post 5998661)
I also have one waiting in the wings, to be built as a CJ-3B. This one will be a steel frame though. Is your 51 a M38A1 or a straight M38?

Straight M38 - the change over to A1 was late 1952 :)

Ad Lav 02-16-2020 07:28 AM

Re: 1/6th Willys Jeep
 
I ran the jeep again today, seems to be running pretty damn well. It’s no crawler as such, I have the stock wheels and tyres on it which will be useless.

Looking into a cheap 21st century or Soldier of the world jeep to make a proper crawler out of.

Does anyone know if you can get axle shaft cups with a longer cut out slot for the shaft to fit into?

58_Willys 02-16-2020 08:43 AM

Re: 1/6th Dragon Willys Jeep
 
I don't think I've ever seen deeper cups, but Tamiya makes longer axles...PN 50808(SP808). With some spacers or wider hex's, it would give you some extra width outside the hubs. Traxxas makes some 8mm hex's.

https://images-na.ssl-images-amazon...._AC_SX425_.jpg

Ad Lav 02-16-2020 10:33 AM

Re: 1/6th Dragon Willys Jeep
 
It’s got perfect width but I will bare that in mind for my next one :)

Not sure if all the cups are the same depth?

58_Willys 02-16-2020 11:15 AM

Re: 1/6th Dragon Willys Jeep
 
Quote:

Originally Posted by Ad Lav (Post 5998750)
It’s got perfect width but I will bare that in mind for my next one :)

Not sure if all the cups are the same depth?

The Highlight axles are a little shorter but are hardened. Too long interferes with steering angles and weakens the area.

May I ask what it is that you are trying to do?

Ad Lav 02-16-2020 11:49 AM

Re: 1/6th Dragon Willys Jeep
 
I noticed on full lock that one side the shaft end is very close to popping out of the cup slot!

58_Willys 02-16-2020 04:08 PM

Re: 1/6th Dragon Willys Jeep
 
You could shim the inner and outer axles a little. You could also add some kind of a stop on the steering knuckles that would keep it from going beyond that point. Evening up the toe-in or out may also reduce the side that is close to popping out. "thumbsup"

herrmill 04-24-2020 11:42 PM

Re: 1/6th Dragon Willys Jeep
 
I just got FMS' new 1/6 ROCHOBBY 1941 MB Scaler yesterday so don't have a clue yet on parts availability but the tires that came with this are nice. Overall happy with the detailing & build quality.

Initial impressions are quite good except for the suspension which is far too soft. Haven't had chance to take it out but need to switch out the shock springs for something far more stiffer. As is, it can even carry one figure without lurching around like a drunken sailor on liberty & that was just running it around a few minuets in the living room.

https://www.fmsmodel.com/product/roc...april-21/1182/

Gula 04-26-2020 01:59 PM

Re: 1/6th Dragon Willys Jeep
 
Why not use wheely king axles? Supposed to be the go to axle on these

58_Willys 05-02-2020 11:58 AM

Re: 1/6th Dragon Willys Jeep
 
Quote:

Originally Posted by Gula (Post 6017340)
Why not use wheely king axles? Supposed to be the go to axle on these

I've heard that too, and they're supposed to be quite stout for these large rigs. They can be tricky with a leaf sprung suspension though. I wanted a much more scale look for mine and the D44's can't be beat for scaleness. "thumbsup"

Twp 07-17-2020 06:47 PM

Re: 1/6th Willys Jeep
 
Quote:

Originally Posted by Ad Lav (Post 5998613)
The day I picked it up :)

https://uploads.tapatalk-cdn.com/202...021523d339.jpg

New figure and tidy up done. Removed flaking decals and dusted/cleaned.

https://uploads.tapatalk-cdn.com/202...5ee224a224.jpg


Sent from my iPhone using Tapatalk

I want to find one of these. They are very cool.

rustneversleeps 11-17-2020 01:49 PM

Re: 1/6th Willys Jeep
 
Quote:

Originally Posted by Twp (Post 6035082)
I want to find one of these. They are very cool.

amazon has them from $25 to over $500, action ,military ,movies.

https://www.amazon.ca/dp/B083DT74J6/...v_ov_lig_dp_it


All times are GMT -6. The time now is 02:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com