Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 5 Attachment(s) What's up people. it's been at least 3 to 4 years since i did a build. Matter of fact sold most of my RC and have 9 left and they're all been sitting dormant since then.. lol.. So now i have the itch to start another build during the winter months. This time it will be the G.I. Joe Jeep Willy's that been on the shelf for like 8 years and didn't have the courage to rip it apart. So after doing some homework and Googling (G.I. Joe Jeep Willy's build) and lot of images pop up to give some insight on where to go with this.. I would like to keep it Army looking, will save me time to paint but you never know.... also i want to make this a leaf spring instead of links set up that i see every body doing.. My OCD tell me to do leaf's spring to make more scale, don't care for articulation at the moment but if leaf's don't pan out will try the links.... For parts I'll be just using what i have on hand as I'm going to try a budget build which in my mine is still going to cost me...hahaha As for trans going try a brand new Axle Yeti trans Or (Xtra Speed 2 speed trans, at least with forward engine ,More Money)with Old school axial axles and like to upgrade to D44 axle housings.. Servo-cheap one for now, and still working on some type of army tire... Anyways there probably be lots of pics and I'll try to explain as best as I can.... Also as i write this I'm a bit a head of the build so I'll try to play Ketchup.. lol Catch-up.. Enjoy....one more thing, for all you Hasbro Jeep willy's build thanks for your knowledge and inspiration.. Ps might be a long build nothing fancy just long and slow.... As one person said on this forum a while back said,this is (Eye Ball Engineering) at best.. this is what i have to work with..2003 Gi Joe Jeep Willy's.. Attachment 392625 Attachment 392626 Attachment 392627 Attachment 392628 So this where I'm at now all apart and investigating each piece on how and where I'm going to cut and modify....."thumbsup" Attachment 392629 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale WooHoo! another Jeep build! |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 8 Attachment(s) well made some more progress not much but getting there... Not to good at explaining stuff but try my best.so after grinding to where I want to be the transfer case fits well... frame off resto.. Attachment 392690 figuring out leaf .. Attachment 392691 Attachment 392692 Attachment 392693 ties are 2.2 going to try 1.9 thinner tire 4.75 height... Attachment 392694 here's the yeti trans and motor that I'm going to try to shoehorn under the hood...lol Attachment 392695 using xtra shaft the i had from the yeti and cutting it here..... Attachment 392696 Attachment 392697 not sure if it's order but hope it helps... |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 3 Attachment(s) found more pics, cut ,hardware ,spacer, ready to install...... lol Attachment 392698 Attachment 392699 Attachment 392700 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 8 Attachment(s) so as you can see I remove most of the extra plastic to fit yeti transfer case...still have to fab up support for motor and trans pics pretty much explains everything...... Attachment 392707 Attachment 392708 Attachment 392709 Attachment 392710 Attachment 392711 I decided to leave the Oil pan for now i think i might be able to use it for support.. Sanded ready for trans.. Attachment 392712 Attachment 392713 Attachment 392714 Well that pretty much it for now..."thumbsup" |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 4 Attachment(s) Little more done today made myself a little support to my trans and motor...nothing fancy not sure if it's going to work but just going with the flow. Aluminum plate cut to fit in between stock frame rails... Attachment 392729 Attachment 392730 Attachment 392731 as always looking for scrape pieces and came across this for window blinds for now later will make better ones.. Attachment 392732 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 1 Attachment(s) Had a error come up while loaded pics so here are the remaining ones.. Here's a good place to add some extra weight for Low CG... Attachment 392734 fudge it won't load pics except for one...lol i'll try tomorrow..:flipoff: |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale Other than the added wait in the frame it looks great A heads up I'm loosing allot of steering because of the slop in the leaf springs and frame flex I'm thinking of going to servo on axle to fix it just something to think about since your still building |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 1 Attachment(s) Quote:
here's a pic in advance of my leaf spring setup, it's change more then once but for now turning radius is perfect but leaf springs are stiff ( Probably remove small one and put it on top or just have 2 leafs, there is not much flex..."thumbsup" Attachment 392739 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 10 Attachment(s) Well time for little update..... So I'm at the point were I have to stuff this motor trans,combo in the engine compartment.. Being 18 yr old Hasbro body was scared to screw up or cut to much, but I went for it any ways... Attachment 392779 Attachment 392780 A little trimming is needed for transmission to fit snug and cut off couple engine mount so would fit... Attachment 392781 Attachment 392782 Attachment 392783 Almost there decided .Gonna try to see if i have enough room to have the pinion and gear set are visible just for fun may be paint fake fan.. Attachment 392784 Attachment 392785 Engine cover fits Attachment 392786 Attachment 392787 Attachment 392788 That it for now. I guess it's time pitter patter and get at her .. I don't know about you but I love fabbing up stuff..."thumbsup" |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 8 Attachment(s) Ok so i figured out the motor mount for now.. It seem to be in a good location but as i progress there will some changes for sure since a leaf spring set up and using the existing plastic frame. I may fill in the void inside the frame with a epoxy once it's all setup.. So I'm at the point where I have to install the rad & grill combo.. Rather then cut it up totally i wanted to see if I would have enough room to have it in front of rad rad so where you can see it..0 tolerance ...More pics.."thumbsup" Attachment 392830 Attachment 392831 Attachment 392832 Cut here Fan and Pinion .. Attachment 392833 Attachment 392834 It fits on to the next mod... Attachment 392835 Attachment 392836 Attachment 392837 well i guess that it pretty simple..on to the next mod.. oh ya broke the bank and ordered me some goodies should show up in about a month...lol take care all..."thumbsup" |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 6 Attachment(s) So i started working on motor mount again pretty simple...just a plate with 4 holes in it.... Attachment 392892 Attachment 392893 Motor sit flat and temporary screws to hold motor in place.. Attachment 392894 Attachment 392895 Attachment 392896 Attachment 392897 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 6 Attachment(s) Part 2 motor mount..... Attachment 392898 Attachment 392899 2.2 Growlers seem to fit very well under the wheel wells.. Attachment 392900 Attachment 392902 Attachment 392903 "thumbsup" |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale 7 Attachment(s) Well I worked on the willy's the last week and took some pics of the front spring set up, still have no idea where or how I'm going to set the shocks and its been going slow too. Right now I think its going to sit to high so next step might have to be is to try the springs under the axles and I'll probably have to cut some of the front frame..I'll keep at it till the end never give up... Stay safe people.. Attachment 393287 Attachment 393288 Attachment 393289 Attachment 393290 Attachment 393291 Attachment 393292 Attachment 393293 |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale I like where this is going, it'll be interesting to see how the leafs work once all the weight is on them. As far as where to mount the top of the shocks, if you look at other Jeeps here with your same body and frame, they've attached inside the fenderwell to the body. I built the old style Hasbro 7000 Jeep, with 4 link & shocks, and when it was completed with ladder frame, cage, figures, accessories, and battery, it came out to 14 1/2 lbs |
Re: Rusty Attempts A G.I. Joe Never Sleeps 1/6 Scale you can remove a few leafs to lower the ride hight some |
All times are GMT -6. The time now is 07:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com