Axial SCX6 Transmission Parts list?

[99SigTownie]

Is there a parts list to get the parts out in the forums or somewhere to put together the SCX6 Transmission? For those of us (like me) that like to kitbash and DIY R/C's together...I haven't found a place to just buy a pre-built SCX6 transmission, just the replacement parts to fix one.

Oh, and this is my first post so Hello all!, I've been lurking for a couple weeks or so just reading.

[HumboldtEF]

Hey Welcome to RCC!

I'd use the manual to reference the parts, Tranny is on page 56: https://www.horizonhobby.com/on/dema...-Manual-EN.pdf

BTW where do you see parts? I think Horizon is the only place with them (well some) at this point.

[99SigTownie]

Originally Posted by HumboldtEF

Hey Welcome to RCC!

I'd use the manual to reference the parts, Tranny is on page 56: https://www.horizonhobby.com/on/dema...-Manual-EN.pdf

BTW where do you see parts? I think Horizon is the only place with them (well some) at this point.

Thank you for the pdf, and I saw parts here, I'm not sure if everything is listed yet for replacements, but I really hope so!
Axial Racing - SCX6 Jeep JLU Wrangler: 1/6 4wd RTR Silver

[jeep_boy02]

So, since I don't have one of these but also like to build my own it appears that one could piece together the entire axle and transmission for a custom build.

Is there a transfercase or is that built in to the trans?

Do they offer non plastic axles yet?

Can someone in the know of these post a list as to what all parts to purchase to have a complete trans or axle please.

Sent from my SM-A015A using Tapatalk

[99SigTownie]

Originally Posted by jeep_boy02

So, since I don't have one of these but also like to build my own it appears that one could piece together the entire axle and transmission for a custom build.

Is there a transfercase or is that built in to the trans?

Do they offer non plastic axles yet?

Can someone in the know of these post a list as to what all parts to purchase to have a complete trans or axle please.

Sent from my SM-A015A using Tapatalk

I think it is built into the transmission, and as far as metal axles, I found these...But they ARE rather expensive.
https://www.trealhobby.com/products/...r90-front-axle

[HumboldtEF]

Vitavon also has aluminum axles, I imagine VP will eventually too.

Transfer case is part of the tranny.

[jeep_boy02]

Originally Posted by 99SigTownie

I think it is built into the transmission, and as far as metal axles, I found these...But they ARE rather expensive.
https://www.trealhobby.com/products/...r90-front-axle

Wouldn't be too bad if they came with knuckles. Who want to run alum housing and plastic knuckles!?

Guess it almost seals the deal that they'd get an extra sale with the knuckles seperate

Sent from my SM-A015A using Tapatalk

[HumboldtEF]

Vitavon has knuckles https://www.ebay.com/itm/284498758062

[99SigTownie]

Originally Posted by HumboldtEF

Vitavon has knuckles https://www.ebay.com/itm/284498758062

I've heard good things about them, only downside is some stuff is pricey so might have to buy em when wife isn't lookin.
Treal hobby also has knuckles, https://www.trealhobby.com/collections/scx6
I haven't bought anything from them yet so y'all will have to refer to somebody that has for a review of the parts....But they are available...also kinda pricey, but everything is these days.

[HumboldtEF]

Vitavon at least list the type of alloy is it (7075) where a lot of other manufactures make us guess and that make me assume its not a strong alloy if they cant say. Looks like Treal also uses 7075 on most parts.

[99SigTownie]

So I was going through the list of transmission parts...I'm still in sticker shock $$$...
I expected it to be spendy but...Why on earth is 8x16x5mm ball bearings so bloody expensive!!! I was hoping to upgrade while I'm in there but the cart is already $315.76 with just the stock parts!

[jeep_boy02]

It is new on the market, and the parts even newer... hope they level off soon tho

Sent from my SM-A015A using Tapatalk

[jeep_boy02]

Does anyone have the size for the motor screws?

The parts diagram lists #TLR256009 which is actually the 5mm nylocks

Sent from my SM-A015A using Tapatalk