RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Large Scale Rigs (http://www.rccrawler.com/forum/large-scale-rigs/)
-   -   Tiny (http://www.rccrawler.com/forum/large-scale-rigs/76734-tiny.html)

Bronco 07-03-2007 11:23 AM

Tiny
 
well i was thinking about putting this in the 2.2, but its a little bigger.....;-)
















hahaha, J/K!:lol:

Well ive had my 1/6 CXT for a long time and its time to do something whith it. i decided not to build the "creepy replaca" so im using that chassie.....
http://pic70.picturetrail.com/VOL190.../256468921.jpg

its gunna have an e-maxx tranny with 2 55t Integy lathes. the e-maxx tranny will be upfront....then i will hade a locked x-factor tranny as a transfercase....
http://pic70.picturetrail.com/VOL190.../263539295.jpg

leafs up front.....
http://pic70.picturetrail.com/VOL190.../263539303.jpg
i used sone hacksaw blades i got at harborfreight. those suck so i need to get the spring steel kind at Homedepot"thumbsup"

and the 4 link in the rear...
http://pic70.picturetrail.com/VOL190.../263539289.jpg
http://pic70.picturetrail.com/VOL190.../263539299.jpg


and a quick mock up......thats my TLT comper BTW
http://pic70.picturetrail.com/VOL190.../263539284.jpg

its comming along and itll be very sweeet!!!;-)

Bronco 07-03-2007 11:45 AM

i realy need an ESC, reciever, 1 more 55t, 1/4 servo, some wheels and tires, and 6 revo shafts:twisted:

Brandon M 07-03-2007 01:16 PM

Looks good so far. You going to make a trailor for it?

Mikekx65 07-03-2007 01:18 PM

nice eric i got some shafts but there not revo :(

Bronco 07-03-2007 02:29 PM

Quote:

Originally Posted by Brandon M (Post 755304)
Looks good so far. You going to make a trailor for it?

oh ya! one for my boat and another for my tlt's. at xr100 house he has a creek so im gunna waterproof it.

mike, what kind of shafts? t-maxx?

ok, i got the thing rollin. the rear has 2 savage shocks w/ resivours(sp?). my dad is taking me to homedepot so i can get some saw blades. once i do that ill make a wrap bar.ill get some maximizer beadlocks and mashers and all i need shafts and a servo to make it go!

Bronco 07-03-2007 08:53 PM

ya, i dont think the finders are big enough! lol

Mikekx65 07-04-2007 11:19 AM

yea eric there maxx shafts i got long and short ones lmk what u need and i can send em ith the chassis just like knock a few bucks off the nylint maxx and ill send the shafts just lmk what ya need

Kranberry 07-04-2007 06:15 PM

Quote:

Originally Posted by Bronco (Post 755401)
. once i do that ill make a wrap bar.ill get some maximizer beadlocks and mashers

i have a set of maxx mashers on maximizer beads pm me if you want em"thumbsup"

Bronco 07-05-2007 08:27 AM

ygpm!

Mikekx65 07-06-2007 08:04 PM

you should ask colby to help you drill some holes he will drill some holes if you build his tlt for him lol hows it coming along? we need more pics

Bronco 07-06-2007 08:15 PM

lmfao! lol!!!!!

(inside joke)

its comin along i gotta mount the servo an itll be ready 4 a test run!

Mikekx65 07-06-2007 09:09 PM

did u get shafts? check out my super in the maxx crawler section

xr100 07-06-2007 11:20 PM

no eric u cant handle my hole drilin skils

Mikekx65 07-07-2007 07:03 PM

there are going to be only 2 axles right? where did u get the cxt body? i need a hard body for my 1/6 nylint

Bronco 07-07-2007 08:39 PM

ya, just 2axles. i got the body from walmart ;)

xr100 07-07-2007 09:08 PM

yeh it really really sucks that u wont have it done before we go to panama city
but i think its a good thing because it would be to big to fit in the back of the cadillac

Mikekx65 07-18-2007 12:49 PM

come on eric where are the updates?

Bronco 07-19-2007 07:48 PM

in the camera!:flipoff:

Mikekx65 07-24-2007 02:07 PM

Well get them out. lol We want more pics

xr100 07-24-2007 03:08 PM

Quote:

Originally Posted by Bronco (Post 774982)
in the camera!:flipoff:


yeh well since u left it at my house i can post them up for ya "thumbsup"
if you guys want updates that bad


All times are GMT -6. The time now is 12:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com