Tiny
 

well i was thinking about putting this in the 2.2, but its a little bigger.....;-)
















hahaha, J/K!:lol:

Well ive had my 1/6 CXT for a long time and its time to do something whith it. i decided not to build the "creepy replaca" so im using that chassie.....
http://pic70.picturetrail.com/VOL190.../256468921.jpg

its gunna have an e-maxx tranny with 2 55t Integy lathes. the e-maxx tranny will be upfront....then i will hade a locked x-factor tranny as a transfercase....
http://pic70.picturetrail.com/VOL190.../263539295.jpg

leafs up front.....
http://pic70.picturetrail.com/VOL190.../263539303.jpg
i used sone hacksaw blades i got at harborfreight. those suck so i need to get the spring steel kind at Homedepot"thumbsup"

and the 4 link in the rear...
http://pic70.picturetrail.com/VOL190.../263539289.jpg
http://pic70.picturetrail.com/VOL190.../263539299.jpg


and a quick mock up......thats my TLT comper BTW
http://pic70.picturetrail.com/VOL190.../263539284.jpg

its comming along and itll be very sweeet!!!;-)

i realy need an ESC, reciever, 1 more 55t, 1/4 servo, some wheels and tires, and 6 revo shafts:twisted:

Looks good so far. You going to make a trailor for it?

nice eric i got some shafts but there not revo :(

oh ya! one for my boat and another for my tlt's. at xr100 house he has a creek so im gunna waterproof it.

mike, what kind of shafts? t-maxx?

ok, i got the thing rollin. the rear has 2 savage shocks w/ resivours(sp?). my dad is taking me to homedepot so i can get some saw blades. once i do that ill make a wrap bar.ill get some maximizer beadlocks and mashers and all i need shafts and a servo to make it go!

ya, i dont think the finders are big enough! lol

yea eric there maxx shafts i got long and short ones lmk what u need and i can send em ith the chassis just like knock a few bucks off the nylint maxx and ill send the shafts just lmk what ya need

i have a set of maxx mashers on maximizer beads pm me if you want em"thumbsup"

ygpm!

you should ask colby to help you drill some holes he will drill some holes if you build his tlt for him lol hows it coming along? we need more pics

lmfao! lol!!!!!

(inside joke)

its comin along i gotta mount the servo an itll be ready 4 a test run!

did u get shafts? check out my super in the maxx crawler section

no eric u cant handle my hole drilin skils

there are going to be only 2 axles right? where did u get the cxt body? i need a hard body for my 1/6 nylint

ya, just 2axles. i got the body from walmart ;)

yeh it really really sucks that u wont have it done before we go to panama city
but i think its a good thing because it would be to big to fit in the back of the cadillac

come on eric where are the updates?

in the camera!:flipoff:

Well get them out. lol We want more pics

yeh well since u left it at my house i can post them up for ya "thumbsup"
if you guys want updates that bad

yea lets see em:lol:

:flipoff:

update

I just bought 2 1:6 CXT they will be in on Monday. This Will be my first build in a long time. The chassis and links Will be made of Carbon Fiber as for the color I don't know yet. The Carbon Fiber colors I have are Black,Red,Blue,Yellow and silver. What motors and servos should I run?

welcome to the forum. and im running a 55t lathe motor and 3300mah batterie. it seems to work good at half throttle. and i get around 45min of run time.

-bronco

Thank you for the welcome. I was thinking of running 85T lathe motors and HS645 servos for the 1:6 CXT with 2-6 cell batteries will this combo work? These are big trucks and I want to make a sled for truck pulling since I can't rock crawl too much in this big truck. This is a pic of my full scale truck.
http://i185.photobucket.com/albums/x...Picture138.jpg

I would go with some 65t motors then if its needed run a reduction on it like a gd-600 but if you are going to pull with it you will need some wheelspeed and with 85t motors you would most likely go about a foot then just bury the truck.

No, you're gonna want 35t magnetic mayhems, or a brushless set-up.

Well if he was planning on using 85t motors then i think a 35t wont have enough torque hes building a puller so it will have quite a bit of weight in the front to hold it down. I would say 45t at the lowest. 35t would be not nearly enough torque

http://i185.photobucket.com/albums/x...Picture138.jpg


DROOOOOL!!!:shock:

welp, the build is going no further. i parted most of it out....heres an update before it was parted....
http://pic70.picturetrail.com/VOL190.../268725051.jpg
http://pic70.picturetrail.com/VOL190.../268725049.jpg
http://pic70.picturetrail.com/VOL190.../268725047.jpg
http://pic70.picturetrail.com/VOL190.../268725061.jpg