RCCrawler Forums

666 · 09-11-2007, 10:08 PM

There is nothing like seeing one of these giants bucking around on 14.4 volts, jumping, wheelies, and grins from ear to ear. By far one of the greatest rigs I have owned!

Just wait till you see all my new ideas!

Wrecker · 09-12-2007, 07:37 AM

Yes, both of these rigs have to be the most fun things I've ever driven. 666's on 14.4 volts is a freakin blast to haul a$$ around with jumping and pulling wheelies. You couldn't wipe the smile off my face!

WheelChair · 09-12-2007, 12:30 PM

Wish I could have had the chance to see these beast charged up!

What a cool couple of rigs!

I don't know what madrok's problem was but I am glad to see his ignorant post deleted.

Keep up the good work slugs!

Them two rigs are one of a kind!!

slugzracing · 09-28-2007, 09:37 PM

Ok time to get back to work
Friday night at Nats was a crazy time with finishing the devils rig and then the mad rush to get Shelly up and running, next year I am bringing an 8' table

Friday night the chassis was quickly touched up, ground, and then painted. The drive train was then installed and the assembly began. Saturday night after getting back from dinner the electronics were installed and the test run yielded better than expected results. Sunday She hit the rocks and even caught the eye of our Japanese friend from RC world. I just wish he could have seen her done!
Fast forward to today and things are picking back up. I decided top keep things very simple out back so there is just a tool box (RX box) and the spare tire. Here is the tool box in its humble beginnings.

Saturday I have a job interview but the rest of the day will be devoted to getting stuff done! I need to hit up the LHS for some styrene siding for the tool box and if the Lovell rig lets me the winch will be mounted.

Wrecker · 09-28-2007, 11:14 PM

Lookin good slugz!
Friday night was crazy, I think i spent more time working on 666's over the trip than I did driving or working on any of my stuff!

But it was worth every second. Didn't we burn up (literally), something like 4 motors and two pinions?

I can't wait to crawl with the twins again, especially if shelly is done.

666 · 09-28-2007, 11:26 PM

HAHAHA! burnt up a 45 turn 2 55 turns, bent the shaft on a 3013, shredded 2 pinions, lost 2 more, and hours of permagrin!!!

I thank you both for all the work on this pig, maybe I should give it to you?

NOT!!!!

slugzracing · 09-29-2007, 12:07 AM

So how much have you broken since then

666 · 09-29-2007, 12:12 AM

Quote:

Originally Posted by slugzracing

So how much have you broken since then

Well, I have broke both the front stock axles, a front axle housing, stripped the 1st gear in the tranny, bent a shock shaft, many rod ends, and Paris broke her sunglasses. Not too bad considering what I have done to it!!

slugzracing · 09-29-2007, 12:14 AM

And I have yet to break a stub axle on Shelly

666 · 09-29-2007, 12:18 AM

Quote:

Originally Posted by slugzracing

And I have yet to break a stub axle on Shelly

I have not broke those yet, just the inners. I was hoping to get some cvd's for the front but they got lost in the mail. So I guess I will use my surplus of stock Clod axles!

You have to see this thing with 2 Mag Mayhems!! It is fun!!!

slugzracing · 09-29-2007, 12:13 PM

Hmm, what could this be....

TURTLE · 09-29-2007, 01:08 PM

Is it the start of a high lift?

slugzracing · 09-29-2007, 01:10 PM

Quote:

Originally Posted by TURTLE

Is it the start of a high lift?

You's a cleva one!

slugzracing · 09-29-2007, 05:59 PM

Still much to do but here are the first poser pics.
I tried to recycle the piece that goes in front of the windshield but it was a no go. It was far to windy today to get all of the tube done but the important part is done.

Wheeling pics are coming Sunday since she will be running in the super class

TURTLE · 09-29-2007, 06:33 PM

Quote:

Originally Posted by slugzracing

You's a cleva one!

I do what I can.

Your new super huh?

slugzracing · 09-29-2007, 06:35 PM

Quote:

Originally Posted by TURTLE

I do what I can.

Your new super huh?

If anyone places lower than me they need to quit and sell their rigs

666 · 09-29-2007, 07:02 PM

Quote:

Originally Posted by slugzracing

If anyone places lower than me they need to quit and sell their rigs

I can see it happening, but I ain't gonna sell!

XrunnerSWB · 09-30-2007, 11:00 PM

which axles are those?

Wrecker · 09-30-2007, 11:15 PM

Quote:

Originally Posted by XrunnerSWB

which axles are those?

txt

Lookin good slugz! To bad I couldn't see both of them today at the comp. I can't even imagine Chelly on magnetic mayhems, ...as if she wasn't fast enough with 45 turns locked in first.

slugzracing · 10-01-2007, 06:53 PM

Oh yeah, she made it to the top 5*

* by default but hey, top 5 is top 5!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-11-2007, 10:08 PM	#61
666 MODERHATER™ Join Date: Nov 2005 Location: Colorado Posts: 10,939	There is nothing like seeing one of these giants bucking around on 14.4 volts, jumping, wheelies, and grins from ear to ear. By far one of the greatest rigs I have owned! Just wait till you see all my new ideas!

09-12-2007, 07:37 AM	#62
Wrecker [HOONIGAN] Join Date: Nov 2005 Location: Grand Junction Posts: 4,269	Yes, both of these rigs have to be the most fun things I've ever driven. 666's on 14.4 volts is a freakin blast to haul a$$ around with jumping and pulling wheelies. You couldn't wipe the smile off my face!

09-12-2007, 12:30 PM	#63
WheelChair Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods Posts: 661	Wish I could have had the chance to see these beast charged up! What a cool couple of rigs! I don't know what madrok's problem was but I am glad to see his ignorant post deleted. Keep up the good work slugs! Them two rigs are one of a kind!!

09-28-2007, 09:37 PM	#64
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	Ok time to get back to work Friday night at Nats was a crazy time with finishing the devils rig and then the mad rush to get Shelly up and running, next year I am bringing an 8' table Friday night the chassis was quickly touched up, ground, and then painted. The drive train was then installed and the assembly began. Saturday night after getting back from dinner the electronics were installed and the test run yielded better than expected results. Sunday She hit the rocks and even caught the eye of our Japanese friend from RC world. I just wish he could have seen her done! Fast forward to today and things are picking back up. I decided top keep things very simple out back so there is just a tool box (RX box) and the spare tire. Here is the tool box in its humble beginnings. Saturday I have a job interview but the rest of the day will be devoted to getting stuff done! I need to hit up the LHS for some styrene siding for the tool box and if the Lovell rig lets me the winch will be mounted.

09-28-2007, 11:14 PM	#65
Wrecker [HOONIGAN] Join Date: Nov 2005 Location: Grand Junction Posts: 4,269	Lookin good slugz! Friday night was crazy, I think i spent more time working on 666's over the trip than I did driving or working on any of my stuff! But it was worth every second. Didn't we burn up (literally), something like 4 motors and two pinions? I can't wait to crawl with the twins again, especially if shelly is done.

09-28-2007, 11:26 PM	#66
666 MODERHATER™ Join Date: Nov 2005 Location: Colorado Posts: 10,939	HAHAHA! burnt up a 45 turn 2 55 turns, bent the shaft on a 3013, shredded 2 pinions, lost 2 more, and hours of permagrin!!! I thank you both for all the work on this pig, maybe I should give it to you? NOT!!!!

09-29-2007, 12:07 AM	#67
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	So how much have you broken since then

09-29-2007, 12:14 AM	#69
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	And I have yet to break a stub axle on Shelly

09-29-2007, 12:13 PM	#71
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	Hmm, what could this be....

09-29-2007, 01:08 PM	#72
TURTLE Gettin’ back on the horse Join Date: Feb 2006 Location: Hoonsville Posts: 6,671	Is it the start of a high lift?

Sponsored Links

09-30-2007, 11:00 PM	#78
XrunnerSWB Newbie Join Date: Jan 2007 Location: Corona Posts: 13	which axles are those?

09-29-2007, 05:59 PM	#74
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	Still much to do but here are the first poser pics. I tried to recycle the piece that goes in front of the windshield but it was a no go. It was far to windy today to get all of the tube done but the important part is done. Wheeling pics are coming Sunday since she will be running in the super class

10-01-2007, 06:53 PM	#80
slugzracing I wanna be Dave Join Date: Mar 2005 Location: Hiding from Goodall Posts: 2,518	Oh yeah, she made it to the top 5* * by default but hey, top 5 is top 5!

RCCrawler Forums

Thread: Twins!