Scale wheel hardware packages - need your input Since it was requested, we are going to look into offering scale hardware for specific 4 wheel packages of other manufacturers ... but we need your help. There are hundreds of different wheels out there and we do not have them all on hand to be able to check for ourselves. So, if you have a set of wheels that you would like us to offer a scale hardware kit for, please post up with the manufacturer name, wheel name and the associated quantities and sizes of the hardware on the wheels. We will do our best to verify and accommodate everything we can. "thumbsup" |
Re: Scale wheel hardware packages - need your input For instance.... ------------------ Vanquish Products OMF, Method, and KMC wheels (1.9 and 2.2) 148pcs 1-64 x 1/4 SHCS 78pcs 4-40 x 1/4 SHCS ------------------ "thumbsup" |
Re: Scale wheel hardware packages - need your input Here's what I have rc4wd Dick Cepek Torque 1.55" Internal Beadlock Wheels same hardware as the 1.9 [IMG]http://i993.photobucket.com/albums/a...pszcgwynnu.jpg[/IMG] |
Re: Scale wheel hardware packages - need your input Quote:
We do not have one of those here to measure. |
Re: Scale wheel hardware packages - need your input Sweet! Thanks for listening to your customers. |
Re: Scale wheel hardware packages - need your input Quote:
20x M2x6mm SHCS 32x M2.5x8mm BHCS |
Re: Scale wheel hardware packages - need your input Any news on the scale wheel hardware packages would love to get some |
Re: Scale wheel hardware packages - need your input I run gearhead 2.2 wheels and they use 4-40 x 7mm for the hubs and rings. |
Re: Scale wheel hardware packages - need your input OMF's...YES PLEASE! |
Re: Scale wheel hardware packages - need your input Quote:
Have you tried them? We don't have a 4-40 scale hex bolt in production, so not package we can make for that. I wish they had done 3mm instead! :x |
Re: Scale wheel hardware packages - need your input Quote:
For VP OMFs you can buy a pack of our 4-40 Acorns and 2 bags of our 1-64 hardware. "thumbsup" Or is someone else making OMF as well? |
Re: Scale wheel hardware packages - need your input TSS 96 x M2 x 7or8mm + 24 4-40 for SLW hubs will these packages be available with and without tools? that would be cool. |
Re: Scale wheel hardware packages - need your input Quote:
4-40 acorn wheel studs come in packs of 28. Can you guess where I get all my scale hardware. _________________________________________________ What I'd like to see is M2 acorn wheel studs 7mm and/or 8mm in length, so I can add a bit more "bling" to the rock monsters that TSS sold me a few months back. It'd be kinda nice to do up the TSS rock monsters completely in acorn studs. |
Re: Scale wheel hardware packages - need your input Have the 4-40 acorns already, they look great. Was really hoping you guys had a lead on 4-40 scale bolts. Oh well.... |
Re: Scale wheel hardware packages - need your input Quote:
Not saying never, but we are trying to make everything to fit our gear and Axial first... then we'll work on parts for others. "thumbsup" |
Re: Scale wheel hardware packages - need your input I think some of the motoworx stuff uses 2.5mm hardware for their wheels, as well as 4-40s, so I guess I could do with some 2.5mm scale hardware, and a scale cross wrench, you know four heads a 3mm, 2.5mm, 2mm, and a flat prying surface. I just want it as a scale item, but it you wanna make it strong enough to use then that'd be cool too. |
Re: Scale wheel hardware packages - need your input Mayhem wheel sets would be cool.. I think they are 2-56 on the 1.9s and 3mm on the 2.2 |
Re: Scale wheel hardware packages - need your input Quote:
Just need to get a count of how much they use. And do the 2.2 use 2-56 for their center hubs? I think they do and that was one of the reasons we did the 2-56 Acorn Nut kit ... but it's been a while since we put those together. |
Re: Scale wheel hardware packages - need your input Quote:
I'm pretty sure they are 2-56 for the center hubs (6 on most wheels) I swapped mine out for smaller 2mm stainless though. they would be why you made the 2-56 acorn nuts though, their hubs work the opposite as a slw (bolt goes through the hub and nut on the wheel side) |
Re: Scale wheel hardware packages - need your input This is what I used for my Motoworx 2.2 wheels. 64 of your m2x7 scale bolts 32 of your 2mm acorn 3mm studs The only issue I have is the 3mm driver is to thick to install the acorn studs with the Motorowx center caps. I am going to put the driver in the lathe and turn it down enough to work. Otherwise it looks damn good I think. http://i374.photobucket.com/albums/o...psv7qapjnd.jpg |
All times are GMT -6. The time now is 01:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com