RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Losi Micro-Rock Crawler (http://www.rccrawler.com/forum/losi-micro-rock-crawler/)
-   -   Just picked one up! (http://www.rccrawler.com/forum/losi-micro-rock-crawler/213912-just-picked-one-up.html)

slashracer111 11-29-2009 09:00 PM

Just picked one up!
 
Hey,
Well, As the title reads I just picked up a micro crawler! Here are some of my plans for it:
Add 1oz of bbs to each front tire
Relocate the battery to the rear axle
Relocate the esc to on top of the servo
Droop stock shocks (untill I get some micro t oil shocks)
200mah (or so) hyperion lipo (5C CHARGE RATE FTW)
Slam the body as low as I can make it go without chopping it up crazy style
ummm, thats it
I have a few questions though.

What are the BEST micro t shocks that will work good and will not leak much oil?

Does the lipo cutoff work good on the stock esc? I know alot of people are scared to use it.

How much runtime are you getting with a setup similar to mine?

Thanks,
Oh, Whenever parts come out this thing I will have rear steer too :mrgreen:

the modder 11-29-2009 09:13 PM

Quote:

Originally Posted by slashracer111 (Post 2134032)
Hey,
Well, As the title reads I just picked up a micro crawler! Here are some of my plans for it:
Add 1oz of bbs to each front tire
Relocate the battery to the rear axle
Relocate the esc to on top of the servo
Droop stock shocks (untill I get some micro t oil shocks)
200mah (or so) hyperion lipo (5C CHARGE RATE FTW)
Slam the body as low as I can make it go without chopping it up crazy style
ummm, thats it
I have a few questions though.

What are the BEST micro t shocks that will work good and will not leak much oil?

Does the lipo cutoff work good on the stock esc? I know alot of people are scared to use it.

How much runtime are you getting with a setup similar to mine?

Thanks,
Oh, Whenever parts come out this thing I will have rear steer too :mrgreen:

get 2 sets of hot raceing rear shocks for the micro-t, personally, id just wait till they make aftermarket ones for the mcrc, go to ace hardware, or lowes, or any hardware store and try to find a softer spring that will fit in the shock, cut it to the length of the stock spring and do that for all 4 shocks that should be good


All times are GMT -6. The time now is 04:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com