01-22-2010, 07:18 AM | #21 |
Rock Crawler Join Date: Jan 2010 Location: [loh-key-shuhn]
Posts: 865
|
Those look awesome! I'd rather see allen head screws for the beadlocks. Phillips looks somewhat cheesey. I can see that due to the five large holes, there is not enough room for matching the screw pattern of the stock beadlock rings, or the current aftermarket wheel weights. Various size bead lock rings for these wheels could be an additional product idea? But, I'm sure this wheel and tire combo matches any weighted tire combo most of us run. Great job. Now we need estimated pricing (for the wife's approval process), and a [buy now] button to click.
|
Sponsored Links | |
01-22-2010, 07:22 AM | #22 |
RCC Addict Join Date: Jun 2006 Location: Maryland
Posts: 1,255
|
Sick. Please make a scale wheel. I want scale aluminum wheels for my Commando! |
01-22-2010, 07:33 AM | #23 |
Quarry Creeper Join Date: Jan 2008 Location: Cumming/ North ATL
Posts: 490
|
Any chance the offset is wider then stock . . maybe i missed it reading through the thread |
01-22-2010, 07:36 AM | #24 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
|
Very Nice. Keep bringin' the new products. Just for fun you might add something in a picture for a size reference. Quarter, stack of naked chicks' playing cards, etc.. The mirco size of the whole rig plus your wicked micro sized masterpieces might lure someone's interest. Some folks might not know the micro-ness of these little rigs yet. |
01-22-2010, 08:13 AM | #25 |
Rock Stacker Join Date: Feb 2008 Location: WV
Posts: 73
|
count me in.....sold |
01-22-2010, 08:26 AM | #26 |
I wanna be Dave Join Date: Jun 2007 Location: Earth
Posts: 2,488
|
The production wheels will have allen screws...there were all I could get my hands on quickly for testing. The back bead seating face is flush with the back of the wheel hub. I eliminated the hex and opted for pin only to help keep cost where it needs to be. The track width with these and full foams comes in at 3-5/8". The wheel width is right around .350" wide (+.060 per rock ring). I am working out price over the next few days hopefully. These are 5 bolt so they will only work with Vertex Micro-Lock specific rings. Colors will be considered on the production run, and I will most likely do a poll thread specifically for what colors you all would like to see. No room for a channel given the size and desire to keep cost affordable. Full foams are currently being used in these. I will most likely look into some steel rings for the back side of the wheel for weight addition. I am working on some scale stuff...but the detail involved in scale forces the use of smaller cutters thus driving up the cost to produce exponentially. Here's your size reference pic along with a few other body on shots. |
01-22-2010, 09:04 AM | #27 |
RCC Addict Join Date: May 2006 Location: enid
Posts: 1,250
|
I knew it was only a matter of time till these came out:-P
|
01-22-2010, 09:18 AM | #28 |
RCC Addict Join Date: Jul 2006 Location: So Cal USA
Posts: 1,109
|
Bad ass Don! |
01-22-2010, 09:30 AM | #29 |
Newbie Join Date: May 2008 Location: Los Angeles
Posts: 7
|
Me likes , Me wants |
01-22-2010, 11:02 AM | #30 |
Rock Stacker Join Date: Nov 2005 Location: ottawa
Posts: 70
|
You did a good job of making them look factory. I like that. Thanks for the pictures with the body.
|
01-22-2010, 11:28 AM | #31 |
Quarry Creeper Join Date: Nov 2008 Location: Orange
Posts: 221
|
I can help test ....if you want!
|
01-22-2010, 11:38 AM | #32 |
Quarry Creeper Join Date: Sep 2005 Location: Canon City
Posts: 466
|
Look sweet, might be in for a set. Any chance on getting some adjustable links(just the links)?
|
01-22-2010, 12:38 PM | #33 |
Newbie Join Date: Jan 2010 Location: Phoenixville
Posts: 6
|
They look great but it would be nice if my BWD weights worked with them...
|
01-22-2010, 01:20 PM | #34 |
I wanna be Dave Join Date: Jun 2005 Location: drillin Holes for the man
Posts: 2,736
|
Don, those little wheels are sick brotha! |
01-22-2010, 02:04 PM | #35 |
Rock Crawler Join Date: Apr 2005 Location: Humble
Posts: 800
|
Man those are freakin sweet.
|
01-22-2010, 03:53 PM | #36 |
Newbie Join Date: Dec 2009 Location: Indianapolis
Posts: 45
|
does that material polish up well?
|
01-22-2010, 08:48 PM | #37 |
Pebble Pounder Join Date: Apr 2009 Location: FORT WALTON/DESTIN
Posts: 116
|
O-M-G Amazing. Nice work!!! |
01-22-2010, 09:15 PM | #38 |
Quarry Creeper Join Date: Dec 2009 Location: Long Island
Posts: 262
|
Looks great, Don :-P Will definitely need to pick up some of these when they are out, would look great on the scaler |
01-22-2010, 09:26 PM | #39 |
Rock Crawler Join Date: Jul 2009 Location: waterville
Posts: 525
|
thats all i can say is wow. very nice
|
01-22-2010, 09:45 PM | #40 |
Newbie Join Date: Feb 2009 Location: Seattle
Posts: 31
|
tyhodge07, they're aluminum, so they should polish pretty well, just use some Mothers aluminum polish.
|
| |