Sick builds, they both look super capable and flexy for scalers "thumbsup" |
Nice work on the body. the mini frame rail chassis from TCS would look really good, and bring the body down some too! |
Like BEELZEBOB said, bring the body down,such a nice bodie and i love the color |
sick dude that looks awesome BTW How hard is it to mount a body |
body isnt too hard depending on how you want to do it here is how i did mine 1st removed stock body mounts 2nd have two battery hold down top pieces cut the side that has two slots in it so its flat 3rd i screwed the battery plates with slots into the skinniest holes the the body mounts go to have two flat plates coming off the top of the chassis then i took the floor part of my rover and made my holes underneath the seats where they were centered with the mounting plates i put four 4-40 screws through the floor and held them on with lock nuts then added 4 more lock nuts so i can adjust the hight of the body by moving those lock buts up or down then jut slide the screws through the hols you make in the mounting plates and put the final nuts on and its held in place here are some pics and pics of the new chassis and new lowered body mounts position enjoy http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg new chassis pics and build http://i560.photobucket.com/albums/s...olorado_US.jpg seems to flex just as good as the stock chassis in a droop setup http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg love the amount of clearance it has http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg motor plate modifications http://i560.photobucket.com/albums/s...olorado_US.jpg hole cut for transmission to fit the body lower http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg what i cut out is hidden http://i560.photobucket.com/albums/s...olorado_US.jpg http://i560.photobucket.com/albums/s...olorado_US.jpg more to come thanks for looking |
sweet build ! ! Lets see more |
good to see someone else using the same way of mounting the body to the chassis as i used |
All times are GMT -6. The time now is 10:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com