Street's t4r build(going IFS) My Aoshima 4Runner model finally came a few days ago so I immediately started work on it. So far I have an almost finished ARB front bumper, a rear bumper with quarter panel protection, and a Rotopax 2gal tank, as well as a little trimming for the tires. I'll let the pics speak for themselves: http://i168.photobucket.com/albums/u...3/P1020035.jpg http://i168.photobucket.com/albums/u...3/P1020037.jpg http://i168.photobucket.com/albums/u...3/P1020038.jpg http://i168.photobucket.com/albums/u...3/P1020039.jpg http://i168.photobucket.com/albums/u...3/P1020040.jpg http://i168.photobucket.com/albums/u...3/P1020041.jpg The Rotopax 2gal gas tank next to the micro wheel for size reference. http://i168.photobucket.com/albums/u...308_091821.jpg For those of you who don't know what it is: RotopaX Gas Packs- 1,2,3 and 4 Gallon Gasoline Any info on how I can make some molds of it or someone who can do it for me would be greatly appreciated. Let me know what you think so far. ..white makes the details in the styrene hard to see.. |
they sell these little army guy kits at target.... they are called bravo team and the y are 1:32 scale and there are like four different sets but they come with all kinds of stuff like gas cans, knap sacks, sleeping bags and guns and even litle scale kitty cats!!!! but seriousley, checkem out cuz they rock!!!! "thumbsup" |
I'll have to check those out. The body is 1/24 though so that stuff might be a little small. I plan on trying to make as much of the stuff myself as I can. I'm currently working on a Gobi Stealth roof rack as well. Unfortunately my order of styrene I got yesterday was missing the all important round rod I need to do the rack as well as the ARB bumper.. I'll probably stop by the LHS today and pick some up so I can get some more done since I won't be getting a response from the place I ordered my styrene from until Thursday.. This is the Gobi rack on a 3rd Gen I will be replicating: http://www.gobitoyota.com/96-4runner.htm |
i thought it would be small but is actually just about perfect......are you in chelsea mi? if so there is a train show this weekend and there is a guy who is always there with every type styrene you could ever want!!! |
Quote:
|
Little update. LHS only had hollow tubing so I got some of that and then ran steel wire through it. Made the bending really easy and stopped almost all of the pinching from happening on the bends. Got the tube work on the ARB done. Only thing left to do on it is make a fair lead and drill it. http://i168.photobucket.com/albums/u...3/P1020043.jpg http://i168.photobucket.com/albums/u...3/P1020044.jpg http://i168.photobucket.com/albums/u...3/P1020045.jpg Also got my sliders almost done. Probably going to add a couple center supports like the ones on my 1:1. I used a combination of square rod and round rod just like on my 1:1. http://i168.photobucket.com/albums/u...3/P1020046.jpg |
Got the Gobi rack basically done. need to drill mounting holes and as soon as the LEDs I ordered get here I will set up lights for it. Got the sliders mounted to the body for now, once I have the frame and suspension worked out they will be mounting to it. These pictures are with the body sitting at about the ride height I want and with the axle about the WB I want. http://i168.photobucket.com/albums/u...3/P1020057.jpg http://i168.photobucket.com/albums/u...P1020053-1.jpg http://i168.photobucket.com/albums/u...3/P1020054.jpg http://i168.photobucket.com/albums/u...3/P1020055.jpg http://i168.photobucket.com/albums/u...3/P1020056.jpg Let me know what you think. |
Trying to decide whether or not I should go this route.. http://i168.photobucket.com/albums/u...chstuff010.jpg |
Lookin great man - do you just glue everything together? |
Quote:
|
Really nice job on the tube work! "thumbsup" |
Quote:
|
Small update. I'll let the pics speak for themselves, have to get to work. http://i168.photobucket.com/albums/u...3/P1020064.jpg http://i168.photobucket.com/albums/u...3/P1020065.jpg http://i168.photobucket.com/albums/u...3/P1020066.jpg http://i168.photobucket.com/albums/u...3/P1020067.jpg http://i168.photobucket.com/albums/u...3/P1020069.jpg http://i168.photobucket.com/albums/u...3/P1020070.jpg |
What motor is that?? |
Automic MicroBB motor. It kinda sucks unless you are looking for speed or plan to re-wind it. |
i may be wrong, but i think the mirrors will fall off after a few tumbles |
ARB Bumper and rear bumper painted, Interior 25% done, grill painted and lenses installed along with LEDs behind them, and tail lights installed with LEDs as well. http://i168.photobucket.com/albums/u...3/P1020083.jpg http://i168.photobucket.com/albums/u...3/P1020085.jpg |
Did some more detail work. Got the steering situated, but it will be changing soon as I am getting a bit of binding with it. Will probably be ordering the SMC 4.5ex chassis as I'm hating my WB right now, lots of rubbing. http://i168.photobucket.com/albums/u...3/P1020100.jpg http://i168.photobucket.com/albums/u...3/P1020099.jpg http://i168.photobucket.com/albums/u...3/P1020098.jpg http://i168.photobucket.com/albums/u...3/P1020102.jpg http://i168.photobucket.com/albums/u..._3716996_n.jpg Some goodies came so I will be able to start on the winch system as well as get a matching spare mounted and start on an off-road trailer :D http://i168.photobucket.com/albums/u...3/P1020104.jpg I'm thinking i will mount the winch in the rear and run a tube up to the front for the cable to run in. There just isn't any room in the front for it. http://i168.photobucket.com/albums/u...3/P1020106.jpg |
Looks really good! I'll be watching to see how it turns out. Have you tested the winch yet? Crious how strong it will be. |
Thanks! Yes I have tested it. It will do a vertical pull with my micro :D Oh yea, and my micro weighs in at about 20oz! |
All times are GMT -6. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com