|
| LinkBack | Thread Tools | Display Modes |
08-01-2015, 01:50 PM | #81 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| complete wheels and tires list!
Here's a set of 20s spun by DANALLY. I mounted them to Miclaws, but I stuck the stock Trekker tires on for a photo op. For reference purposes. |
Sponsored Links | |
11-04-2015, 12:20 PM | #82 | |
Newbie Join Date: Oct 2015 Location: Bulgaria
Posts: 26
|
Some new tires.They doesn't stick as I hoped,but they are heavier and wider,so this prevent rollovers a lot.Added coper wire end BB's helps too.Front wheels-35gr. each,rear 27gr.And the truck looks good. Quote: HBX 2098B 1/24 4WD Mini RC Car Spare Parts Wheels Complete Sale-Banggood.com Just cut the tires a bit.Now they have more flex and grip.Not much as a real crawler tyre,but close enough.The rubber is harder then it has to be,so nothing more you can do abouth it.At least I like the look of the truck. Last edited by THX_138; 11-25-2015 at 07:53 PM. | |
11-04-2015, 07:50 PM | #83 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: complete wheels and tires list! Last edited by Brake Weight; 11-06-2015 at 04:04 AM. |
12-18-2015, 07:35 PM | #84 |
Pebble Pounder Join Date: Oct 2015 Location: GR
Posts: 110
| Re: complete wheels and tires list! A new flavor from fungi, I'm a fan, white underneath, so some sandpaper will give some scale detail. Thanks! |
01-07-2016, 07:04 PM | #85 | |
Quarry Creeper Join Date: Apr 2010 Location: Earth
Posts: 437
| Re: complete wheels and tires list! Quote:
I just bought my Micro trekker and was wondering if those HBX rims are real beadlocks and if the Micro Trekker tires will fit them? Thanks, J | |
01-09-2016, 12:22 PM | #86 |
Newbie Join Date: Oct 2015 Location: Bulgaria
Posts: 26
| Re: complete wheels and tires list! |
01-09-2016, 12:23 PM | #87 |
Quarry Creeper Join Date: Apr 2010 Location: Earth
Posts: 437
| Re: complete wheels and tires list! |
03-31-2016, 11:54 AM | #88 |
Newbie Join Date: Jan 2016 Location: Worcester
Posts: 32
| Re: complete wheels and tires list!
Bought the cnc alloy wheels from rc4wd for my losi micro crawler. They come with washers and alloy wheels nuts. This is a really dumb question but where do the washers go, under the drive pin? If you place them on the threaded shaft before you do up the wheel nut the wheel binds to hub and wheels lock up...! Any advice? |
04-01-2016, 10:27 PM | #89 |
Pebble Pounder Join Date: Feb 2016 Location: Contra Costa
Posts: 150
| Re: complete wheels and tires list!
^^ Never used any washers on mine and no problems yet. I have brass wideners on right now with barrel nuts, but before those I never had any issues not using washers..
|
07-26-2016, 08:39 AM | #90 |
Quarry Creeper Join Date: Jan 2015 Location: Alcoa
Posts: 212
| Re: complete wheels and tires list!
Rc4wd Scrambler Scrambler Offroad 1.0" Scale Tires I recommend a 130 or larger motor, strong servo, and WIDE wheels to make these work. Dan makes some wide wheels: https://www.facebook.com/Microcrawlermotors/ I'm using the steel RC4WD beadlocks with the face "reversed" and brass wideners- no rubbing. Last edited by TownsendTdi; 09-12-2016 at 08:54 AM. |
08-18-2016, 06:49 PM | #91 | |
Pebble Pounder Join Date: May 2006 Location: Abington
Posts: 188
| Re: complete wheels and tires list! Quote:
| |
09-11-2016, 05:22 PM | #92 |
Pebble Pounder Join Date: Oct 2006 Location: Leaving black marks on Hwy 200
Posts: 129
| Re: complete wheels and tires list!
Just ordered Scrambler tires and 1.0" wheels from the Gelande II for my Trekker. Now maybe I will use it some more. I never drove it much since the stock tires were so crappy.
|
09-11-2016, 06:47 PM | #93 |
Pebble Pounder Join Date: Feb 2016 Location: Contra Costa
Posts: 150
| Re: complete wheels and tires list!
^^ I have the scramblers and they are quite large. They are too large for full suspension articulation on the Trekker and hit the links when turned too far. I have decided to use mine for a comp style crawler because they also rub on the Hummer body of my rig.. on the plus side, they are very sticky, they are indeed large, but that means tougher obstacles with a proper chassis. I recommend cut the outer portion of the foams in yours as well as they are a bit stiff if you leave the entire foam intact Just FYI
|
11-02-2016, 08:04 AM | #94 |
Quarry Creeper Join Date: Jan 2015 Location: Alcoa
Posts: 212
| Re: complete wheels and tires list! |
11-29-2016, 04:45 AM | #95 |
Pebble Pounder Join Date: Feb 2015 Location: Cambridge, UK
Posts: 147
| Re: complete wheels and tires list! |
12-06-2016, 09:57 AM | #96 |
Newbie Join Date: Mar 2016 Location: Sacramento
Posts: 38
| Re: complete wheels and tires list! They wheel hex is held on by the bolts. You can unscrew it and mount it on the other side of the wheel. I don't have them myself but I'm pretty sure that's how it is by the look of some pictures.
|
12-06-2016, 10:31 AM | #97 | |
Pebble Pounder Join Date: Feb 2015 Location: Cambridge, UK
Posts: 147
| Re: complete wheels and tires list! Quote:
The hex is part of the inner rim (they're off one of the first D90 kits) Sent from my Nexus 6P using Tapatalk | |
Tags |
miclows, rc4wd, tires, wheels |
complete wheels and tires list! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Complete list of what you need to build up your AX-10 | ecoli | Axial AX-10 Scorpion | 2 | 09-11-2007 03:57 PM |
Thread Tools | |
Display Modes | |
| |