|
| LinkBack | Thread Tools | Display Modes |
02-28-2011, 12:12 PM | #1 |
I wanna be Dave Join Date: Jun 2007 Location: Earth
Posts: 2,488
| BWD Bullet Proof Micro Widener Kits!
Sorry for the delay guys...but here they are. http://billet-works.com/losi_micro_rock_crawler_parts I have about 20 sets packaged and ready to ship today...beyond that we have many more being QC'd internally and then they will be packaged to ship all week long. The widener hubs are machined from 6061 T6 aluminum...and the barrel nuts are machined from 304 stainless steel. They work with our pin drive wheels as well as the stock wheels and/or stock hexes. BW Last edited by billet works; 02-28-2011 at 12:53 PM. |
Sponsored Links | |
02-28-2011, 02:01 PM | #2 |
Newbie Join Date: Dec 2010 Location: In my tow truck..
Posts: 44
|
just ordered mine! Ill be able to steer!!!!!! |
02-28-2011, 03:37 PM | #3 |
Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales
Posts: 257
|
SEXY TIME!!! I like the width on your crawler, cant wait to get mine. Last edited by dockman; 03-03-2011 at 10:35 AM. |
02-28-2011, 04:22 PM | #4 |
Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales
Posts: 257
|
I am just happy they are ready, just hope they show up before I move in 2 weeks.
|
02-28-2011, 05:06 PM | #5 |
Rock Crawler Join Date: Feb 2009 Location: Milwaukee
Posts: 609
|
Ordered! Seem's like these been a long time coming. Now how about those New Wheels?? |
02-28-2011, 05:28 PM | #6 |
Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales
Posts: 257
|
Poor Don, it never ends for him lol.
|
02-28-2011, 08:05 PM | #7 |
Rock Crawler Join Date: Oct 2004 Location: The thumb
Posts: 788
|
I just ordered a set also. From the pics they look very nice and I can't wait to get them. Did I hear someone say new wheels??
|
02-28-2011, 09:54 PM | #8 |
Quarry Creeper Join Date: Jul 2008 Location: Reno
Posts: 388
|
Very Nice! Ordered up mine. Don, what is your wheelbase sitting at now?
|
03-01-2011, 02:20 AM | #9 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
| |
03-01-2011, 07:12 AM | #10 |
Pebble Pounder Join Date: Nov 2009 Location: Fayetteville
Posts: 129
|
I believe your talking about the rctrax miclow for the miniqlo crawler.
|
03-01-2011, 07:55 AM | #11 |
Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales
Posts: 257
|
Just wondering what size are the barrel nuts? Are they 4.5mm like the stock wheel nuts? They look a little larger in the pics than stock nuts but might be how they are made.
|
03-01-2011, 10:30 AM | #12 |
I wanna be Dave Join Date: Jun 2007 Location: Earth
Posts: 2,488
|
The barrel nuts use a 5mm traxxas type 4way (the next to the smallest size). They actually measure 4.75mm (3/16"). My wheelbase is currently set up at 4.75" For install, all ya need is a wrench to fit and a dab of locktite. No need to wrench down on these as you'll bend the stock drive pins or screw up the bearings Have to remember that the stock micro comes stock with plastic wheel nuts. Still hard at it on new wheels, Micro Dub, another chassis (or two), and many more new projects...and I expect my Micro Vertex's very soon...they are already late. BW |
03-01-2011, 10:58 AM | #13 |
Newbie Join Date: Nov 2010 Location: Canada
Posts: 24
| |
03-01-2011, 11:30 AM | #14 |
Pebble Pounder Join Date: Mar 2010 Location: Crest Hill
Posts: 196
|
Just ordered 2 sets. ( well the wife had 2 thanks to paypal ) Hey Don try this stuff. It's called Vibra-tite VC-3. I use it from my RC cars to the optics on my firearms. And lets just say all of the above take alot of abuse and have never rattled anything loose. Best of all it's a reusable solution. I can't remember ever reapplying it after disassembly of anything it's been on. http://cgi.ebay.com/LOCTITE-VIBRA-TI...6#ht_500wt_922 |
03-01-2011, 04:15 PM | #15 |
Quarry Creeper Join Date: Nov 2010 Location: Canada
Posts: 383
|
Don, what is the actual width gain over stock per side?
|
03-01-2011, 04:24 PM | #16 |
Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales
Posts: 257
|
5mm per a side, I bugged Don about it in a different thread a while back.
|
03-01-2011, 07:52 PM | #17 |
Quarry Creeper Join Date: Jul 2008 Location: Reno
Posts: 388
| |
03-01-2011, 10:08 PM | #18 |
Newbie Join Date: Feb 2011 Location: New Orleans
Posts: 2
|
Still hard at it on new wheels, Micro Dub, another chassis (or two), and many more new projects...and I expect my Micro Vertex's very soon...they are already late. BW[/QUOTE] Are you working on new beadlocks? Can't wait till you'll have Vertex's in stock again. Checking everyday like a fool. But maybe I should wait for some new design from you. Do you combine shipping? I would like to get few things at once. Just waiting for some wheels. Keep up the great work (and stock full) |
03-01-2011, 10:09 PM | #19 | |
Newbie Join Date: Feb 2011 Location: New Orleans
Posts: 2
| Quote:
Are you working on new beadlocks? Can't wait till you'll have Vertex's in stock again. Checking everyday like a fool. But maybe I should wait for some new design from you. Do you combine shipping? I would like to get few things at once. Just waiting for some wheels. Keep up the great work (and stock full)[/QUOTE] | |
03-02-2011, 12:50 AM | #20 |
Newbie Join Date: Dec 2010 Location: In my tow truck..
Posts: 44
| awesome news
more well-made stuff?? well, damnit ill just have to buy another micro for "the kiddo.." cant let it just collect dust.. |
Thread Tools | |
Display Modes | |
| |