RCCrawler Forums - Adjusting LVC on Trail Trekker

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Losi Micro-Rock Crawler (http://www.rccrawler.com/forum/losi-micro-rock-crawler/)

- - Adjusting LVC on Trail Trekker (http://www.rccrawler.com/forum/losi-micro-rock-crawler/595113-adjusting-lvc-trail-trekker.html)

Adjusting LVC on Trail Trekker

Guys let me say ive been searching here and internet and other forums and havent found an answer(not saying i havent missed it) So i apologize if this has been covered, but i recently went to a different lipo 350 mah 2s lipo. Its a turnigy and im only getting <5 mins on it. I put it back on charger and it shows atleast 3v on each cell. Pretty new to the lipo and all that. Am i missing something when charging? Is the LVC set too high somehow? Figured id ask the experts. Thanks guys

Re: Adjusting LVC on Trail Trekker

Quote:

Originally Posted by irvan105 (Post 5797735)

Looks like you didn't finish your post.
I'll assume you're not getting the same run times?
A 350mah lipo generally will get you around 30min give or take, depending on driving style, the terrain, weight of the vehicle ext. When using a charger make sure to charge at a 1c rate or less, so charge a 350mah lipo at
.3 amps.
Also I'm fairly sure the Low voltage cuttoff on the Losi Micro Crawlers are fixed and non adjustable for a 2S lipo

Sent from my SM-N900T using Tapatalk

Re: Adjusting LVC on Trail Trekker

Lipo cells read 3v when at a safe low voltage. You should be getting a run time around 30 min, like spoo76 said. Is it a new battery? If it is and you're sure it's fully charged contact whoever you bought it from, it could be defective. It should read around 8.4v fully charged.