04-22-2012, 12:02 PM | #441 |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: Losi Crawler Pictures......
Here is my MRC: GC3-chassis (stretched) Trail Docters Punisher sticker Greetz, Stollenritter |
Sponsored Links | |
04-27-2012, 05:44 PM | #442 |
Newbie Join Date: Apr 2012 Location: The WET! Coast of Oregon
Posts: 7
| Re: Losi Crawler Pictures......
I went down to the river the other day to conquer the rocks while my wife was agate hunting. About 20 minutes in i was being dive bombed by two killdeer birds...ten minutes later i found out why when i almost crawled over four camo'd eggs in their nest! the only mods so far is a complete waterproofing with plasti-dip and marine grease + the 1.9 losi weighted bead locks. I'm new to the hobby so taking in the tips from the forum and enjoying the reads. Next week i'll head to the nearest hobby shop (+100 miles away in vancouver wa) and check out some body-shells and maybe grab another set of bead locks...We have two MRCs, & my wife is like; "I want those wheels too!"... Happy Trails, Thom |
05-10-2012, 02:17 PM | #443 |
Rock Stacker Join Date: Oct 2008 Location: Italy
Posts: 81
| Re: Losi Crawler Pictures...... |
05-10-2012, 08:58 PM | #444 |
Newbie Join Date: Apr 2012 Location: The WET! Coast of Oregon
Posts: 7
| Re: Losi Crawler Pictures......
Updated info on my MRC I swapped out servos and now have the Futaba S3305 as the HS did not have an equivalent HiTec 645. This one has 145oz of torque and seems to do fine. Swapped out the stock chassis for the TCS Edge. I like it lots! Since this is a non-comp play around rig i didn't mind the extra ounce? of plastic electrical-project-tubing to protect the metal. It sort of gives it a Mad Max look It had a few tumbles and was none the worse looks wise so it did what i'd hoped in protecting the finish. OH, and of course the Monster Drink graphics from a couple cans of the blue version. Swapped out for metal dif parts. Alum. wheel extensions. Alum. threaded shocks with added internal pen-springs to limit travel. Alum. bead lock wheels with included weights on front (gave the extra set to my wife for her front-stock wheels on her MRC, work great). This is taken at a nearby creek. My wife was gold panning a few feet away while i played with the MRC. ....updated with a shot of my wife's MRC with the body and wheel face-lift she did. She really enjoys crawling! Last edited by accrete; 05-11-2012 at 05:32 PM. Reason: added picture of my wife's MRC next to mine :) |
05-11-2012, 01:27 PM | #445 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Losi Crawler Pictures......
.............................
|
05-19-2012, 10:30 AM | #446 |
Newbie Join Date: Oct 2011 Location: Under a rock 1st hole on the left
Posts: 21
| Re: Losi Crawler Pictures......
This is the coolest setup! Are these frames available? Thanks, keep em round and rolling.
|
05-23-2012, 09:50 AM | #447 |
Quarry Creeper Join Date: Nov 2008 Location: grand junction
Posts: 309
| Tekin B1r, promax motor, bent links, stock pro chassis Sent from my DROID RAZR using Tapatalk 2 Sent from my DROID RAZR using Tapatalk 2 Last edited by THX_138; 09-12-2012 at 12:28 AM. |
05-28-2012, 12:03 PM | #448 |
Quarry Creeper Join Date: Jun 2010 Location: Grand Junction
Posts: 305
| Re: Losi Crawler Pictures......
Here are some updated pictures of mine. CG3 Chassis, Vendetta rear shocks with soft springs on all 4, Aluminum C-hubs, Aluminum zero Ack knuckles, custom steering, tower pro high tq digi servo, TEAM BROOD FRENZY mini motor, BWD Lower links, BWD Bomb Proof mounts, Axial 1.9 wheels with custom painted rings, Butchered Flatirons, and Proline internal weights. |
05-30-2012, 09:01 PM | #449 |
Newbie Join Date: Apr 2008 Location: richmond
Posts: 9
| Re: Losi Crawler Pictures......
Stock rtr chasis with bwd 4link servo mount and rear link mount, pro-line swampers, delrin bent links, losi threaded shocks with semi droop set up, insane motor, hitec 5645, lots of weight up front, metal pipe bead lock rings with lead in center of the wheel, trax. 8mm wheel hex's, losi front cvd's and zero ackerman knuckles Works pretty good for bashing, twisted a driveshaft tonight on it romping |
06-01-2012, 11:24 AM | #450 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,921
| Re: Losi Crawler Pictures......
guess it is time to update my pics too. still rtr chassis ax10 ota steering mod overdrive mod lowered electronics 13t pinion on stock motor 4 link rear with pro rear link plate and stock lowers for top links battery on front y link vr-01 beadlock wheels 3oz front, i think bout 1.5oz rear hacked and broken in flat irons losi bronko body traaxas wide hexes with stubs drilled for bigger pins cut and trimmed dog bones for more steering ax10 servo plate losi threaded mrc shocks front in semi droop with 5mm outside limit and pen springs, rear 5mm outside and 8mm inside limit with one coil cut on stock silver springs ( still playing with rear springs) 40wt front and rear outbroaded shocks at chassis 2 stock 1100 nihm and 2 1400 nihm batteries metal locker all around stock knuckles drilled for zero ackerman and axle cases bolted and nutted Last edited by hillbillyrc; 06-01-2012 at 11:27 AM. |
06-11-2012, 01:55 PM | #451 |
Newbie Join Date: Mar 2010 Location: GREECE
Posts: 3
| Re: Losi Crawler Pictures...... |
06-11-2012, 02:27 PM | #452 |
Rock Stacker Join Date: Jun 2012 Location: lee county
Posts: 50
|
heres my little trail trekker i dont see many posted on here |
07-22-2012, 11:59 AM | #453 |
Quarry Creeper Join Date: Jul 2011 Location: Hemet
Posts: 279
| Re: Losi Crawler Pictures......
heres mine...stock esc, stock motor, hs645 servo, overdrive mod, red dot rovers, stock tire foams, stock beadlockes painted white, custom copper fish chassis, cheap 3 channel redcat remote... P1030447 | Flickr - Photo Sharing! P1030443 | Flickr - Photo Sharing! P1030429 | Flickr - Photo Sharing! |
07-28-2012, 08:52 PM | #454 | |
Pebble Pounder Join Date: Apr 2010 Location: Yarrambat, Australia
Posts: 131
| Re: Losi Crawler Pictures......
I'm lucky enough to have 2 MRCs, one which is completely waterproofed and has been everywhere, the other which is built from the ground-up from parts into a capable crawler and semi-scaler. The new and old together: Night crawling Old: Stock MRC chassis & motor with fully waterproofed electronics, 5800mAh NiMH system (2900mAh packs over each axle; 4 hour runtime), waterproof Traxxas servo, metal lockers F, R and centre, multi-mode 220W spotties up front and running/rock lights, Proline Flat Irons. New: GC3 chassis, MRC Pro running gear & Integy alloy linkages, metal lockers F, R and centre, Novak Mongoose ESC & motor, Bluebird hi-torque waterproof servo, 8A BEC, 3S 500mAh LiPO for ESC and motor (30 min runtime), 2S 460mAh LiPO for Rx, BEC + steering and lights (60 min runtime), RC4WD steel beadlocks & Mickey T rubber. -- Quote:
Last edited by cragv; 07-29-2012 at 01:29 AM. | |
08-16-2012, 03:16 AM | #455 |
ahhh S^*T Join Date: Mar 2012 Location: in the shop bending metal in Whatcom Co. WA.
Posts: 888
| Re: Losi Crawler Pictures......
HERES MY MRC THAT IS A FUN RUN RIG ONLY BUT COULD BE A COMP RIG IM SURE... HAS A BIG LIPO FOR HOUR LONG RUN TIME. HAS EVERYTHING, BUILT UP GOOD |
08-25-2012, 10:32 AM | #456 |
Newbie Join Date: Apr 2012 Location: Germany
Posts: 9
| Re: Losi Crawler Pictures......
Here is my Losi MRC Chassis diy PVC Black/red Wheels diy POM red Tire HB Rover red |
09-02-2012, 11:42 PM | #457 |
Newbie Join Date: Aug 2012 Location: Portland
Posts: 32
| Re: Losi Crawler Pictures......
Hey guys! I just picked up this losi Mrc in a trade. I haven't driven it yet, Im really excited to see what it can do! Its all stock other then a traxxas 2200Mah Lipo. |
09-03-2012, 06:54 PM | #458 |
Newbie Join Date: Aug 2012 Location: Fort Bragg
Posts: 4
| Re: Losi Crawler Pictures......
MRC Pro that I traded my Slash for. Added the Proline C10 body. Just need to get some batteries. |
09-07-2012, 04:21 PM | #459 |
ahhh S^*T Join Date: Mar 2012 Location: in the shop bending metal in Whatcom Co. WA.
Posts: 888
| Re: Losi Crawler Pictures......
BEEFED UP mrc's... the collection. |
09-18-2012, 02:03 PM | #460 |
Newbie Join Date: Sep 2012 Location: phoenix
Posts: 11
| Re: Losi Crawler Pictures...... |
| |