| |
03-02-2009, 12:00 PM
| #1 |
| Pebble Pounder Join Date: Aug 2008 Location: pine
Posts: 118
|  car length
is there a spacific length for the 1.9 MRC?
|
|  |
| Sponsored Links | |
| | |
|
03-02-2009, 05:36 PM
| #2 |
| Quarry Creeper  Join Date: Dec 2008 Location: San Diego
Posts: 456
|
if you want to go to comp.
|
|
| |
|
03-03-2009, 10:57 AM
| #3 |
| Pebble Pounder Join Date: Aug 2008 Location: pine
Posts: 118
|
what size does it have to be to enter into a comp?
|
|
| |
|
03-03-2009, 11:01 AM
| #4 |
| Gold Star Baby!  Join Date: Jan 2009 Location: Oroville
Posts: 104
|
The wheel base cant exceed 8.5" if im not mistaken
|
|
| |
|
03-03-2009, 11:08 AM
| #5 |
| Pebble Pounder Join Date: Jan 2009 Location: Wichita
Posts: 120
|
Yep, axle center to axle center 8.5" to be comp legal. 2.4.1 - Vehicle wheelbase is limited to a maximum of 8.5 inches. This is determined by measuring from centerline of front axle stub to centerline of rear axle stub, with all the wheels pointing straight ahead, with the vehicles suspension holding it's own weight. Mike |
|
| |
|
03-03-2009, 11:12 AM
| #6 |
| Quarry Creeper Join Date: Apr 2006 Location: SLC, Utah
Posts: 444
|
I just measured my mrc (Keep in mind I have a Droop Setup everything else is Stock) Wheelbase : 8.5in (Center of hub to center of Hub) Bellypan Height : 1-3/4" Total Length (outside of tire to outside of tire) 12-1/4" Height (top of body from ground) 6-3/8" Width (outside edge tire-tire) 7-1/2" |
|
| |
 |
| |
Linear Mode
