RCCrawler Forums

Sneed · 09-18-2009, 01:09 PM

This is the steering I'm getting. A few things has been changed since this pic. I've added the HR hex's, Changed to a ace rc ds 1015 servo and now the drag link is inline w/ tie rod. lots of approach angle. BTW I get this with dog bones too

JeremyH · 09-18-2009, 01:17 PM

Damn Sneed, that is a nice steering setup! Thanks for the pic!

Shelby, yeah, I'll definitely need to take a look this weekend. I picked up an additional set of aluminum knuckles....was sure if I'd be able to get that broken bolt out...

Sneed · 09-18-2009, 01:26 PM

Thanks. I have to say it's night and day better even over just having CVD's. I've been having better luck w/ moddified dog bones than the losi CVD's though, less driveline binding. The cups of the cvd's were bottoming out against the shaft. Was to afraid to shave the cups for fear of weakening more

Mutant_Xj · 09-18-2009, 11:03 PM

Where do you get the offset rod ends?

JeremyH · 09-19-2009, 07:29 AM

Quote:

Originally Posted by Mutant_Xj

Where do you get the offset rod ends?

They are Axial rod ends used for the steering setup on their AX10's...

Mr. Ed · 09-20-2009, 09:13 PM

Can I get some more detailed shot's of your steering set up? very curious and.....jealous of that throw

JeremyH · 09-21-2009, 06:59 AM

Quote:

Originally Posted by Mr. Ed

Can I get some more detailed shot's of your steering set up? very curious and.....jealous of that throw

I assume you're not asking about mine....

Sneed · 09-21-2009, 07:21 AM

Ha

I'll be posting a build thread soon

Mr. Ed · 09-21-2009, 05:17 PM

Opps sorry jeremy

I just get soooo excited some times

I am diggin your ride though kinda glad I aint gotta run againest ya

As for you sneed I'll be watchin to check that throw

it's funny ya'll caught me in a noobie

JeremyH · 12-24-2009, 09:58 AM

A few small updates:

I still need to rebuild the tie rod and sleeve it for strength, but the setup will be the same.

stubs179 · 12-24-2009, 10:34 AM

Looks good!

Those are some sweet knuckles.

JeremyH · 12-24-2009, 12:06 PM

Thanks! Yeah, I agree....zero ackerman, high clearance....you cant get any better than that!

KrawlOff-Road.com · 12-24-2009, 12:29 PM

I like the FTA/BTA steering you got going on there. Very cool!! Keep up the good work buddy!

-Jason

JeremyH · 12-24-2009, 12:46 PM

Thanks! I wish these things had the room for a full blown BTA, but I just dont think they do.

rock hard · 12-26-2009, 08:09 AM

I want some,where did you get em,and how much[like it really matters]

how many guys run the mrc in your group now.

509 Media · 12-26-2009, 05:06 PM

Sweet build. I have an MRC sitting here that I have been thinking about doing something with. I might have to get on the phone and order some parts for it now.

Dan

firekiddc02 · 12-26-2009, 06:29 PM

Quote:

Originally Posted by rock hard

I want some,where did you get em,and how much[like it really matters]

I ordered mine from here

http://www.rccrawler.com/forum/showthread.php?t=209205

JeremyH · 12-27-2009, 05:13 AM

Quote:

Originally Posted by rock hard

I want some,where did you get em,and how much[like it really matters]

how many guys run the mrc in your group now.

Yeah, like Firekid said, you can order them from EGRESSor. We'll have 3 at the start of the season.

Quote:

Originally Posted by 509 Media

Sweet build.

Thanks man! This thing is a blast to drive!

stubs179 · 12-27-2009, 09:34 AM

Do you know what your turning radius is on carpet? I flipped my knuckles around for better arkerman and it made a difference. Just wondering if i want to start grinding on the dogbones.

JeremyH · 12-27-2009, 10:52 AM

Nope, but I'll try to check it out for you sometime today.

09-18-2009, 01:09 PM	#41
Sneed Rock Crawler Join Date: Dec 2008 Location: With the ATL Crawlers Posts: 707	This is the steering I'm getting. A few things has been changed since this pic. I've added the HR hex's, Changed to a ace rc ds 1015 servo and now the drag link is inline w/ tie rod. lots of approach angle. BTW I get this with dog bones too

09-18-2009, 01:17 PM	#42
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Damn Sneed, that is a nice steering setup! Thanks for the pic! Shelby, yeah, I'll definitely need to take a look this weekend. I picked up an additional set of aluminum knuckles....was sure if I'd be able to get that broken bolt out...

09-18-2009, 01:26 PM	#43
Sneed Rock Crawler Join Date: Dec 2008 Location: With the ATL Crawlers Posts: 707	Thanks. I have to say it's night and day better even over just having CVD's. I've been having better luck w/ moddified dog bones than the losi CVD's though, less driveline binding. The cups of the cvd's were bottoming out against the shaft. Was to afraid to shave the cups for fear of weakening more

09-18-2009, 11:03 PM	#44
Mutant_Xj Quarry Creeper Join Date: Aug 2009 Location: here Posts: 344	Where do you get the offset rod ends?

09-20-2009, 09:13 PM	#46
Mr. Ed RCC Addict Join Date: Apr 2008 Location: Old Hickory Posts: 1,137	Can I get some more detailed shot's of your steering set up? very curious and.....jealous of that throw

09-21-2009, 07:21 AM	#48
Sneed Rock Crawler Join Date: Dec 2008 Location: With the ATL Crawlers Posts: 707	Ha I'll be posting a build thread soon

09-21-2009, 05:17 PM	#49
Mr. Ed RCC Addict Join Date: Apr 2008 Location: Old Hickory Posts: 1,137	Opps sorry jeremy I just get soooo excited some times I am diggin your ride though kinda glad I aint gotta run againest ya As for you sneed I'll be watchin to check that throw it's funny ya'll caught me in a noobie

12-24-2009, 09:58 AM	#50
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	A few small updates: I still need to rebuild the tie rod and sleeve it for strength, but the setup will be the same.

12-24-2009, 10:34 AM	#51
stubs179 RCC Addict Join Date: Jul 2009 Location: Reno, Nv Posts: 1,964	Looks good! Those are some sweet knuckles.

12-24-2009, 12:06 PM	#52
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Thanks! Yeah, I agree....zero ackerman, high clearance....you cant get any better than that!

Sponsored Links

12-24-2009, 12:29 PM	#53
KrawlOff-Road.com RCC Addict Join Date: Apr 2009 Location: Anderson Posts: 1,332	I like the FTA/BTA steering you got going on there. Very cool!! Keep up the good work buddy! -Jason

12-24-2009, 12:46 PM	#54
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Thanks! I wish these things had the room for a full blown BTA, but I just dont think they do.

12-26-2009, 08:09 AM	#55
rock hard dnf Join Date: Sep 2009 Location: Under a big fkn rock. Posts: 1,901	I want some,where did you get em,and how much[like it really matters] how many guys run the mrc in your group now.

12-26-2009, 05:06 PM	#56
509 Media Quarry Creeper Join Date: Jul 2005 Location: Dothan, AL Posts: 251	Sweet build. I have an MRC sitting here that I have been thinking about doing something with. I might have to get on the phone and order some parts for it now. Dan

12-27-2009, 09:34 AM	#59
stubs179 RCC Addict Join Date: Jul 2009 Location: Reno, Nv Posts: 1,964	Do you know what your turning radius is on carpet? I flipped my knuckles around for better arkerman and it made a difference. Just wondering if i want to start grinding on the dogbones.

12-27-2009, 10:52 AM	#60
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Nope, but I'll try to check it out for you sometime today.

RCCrawler Forums

Thread: Jeremy's 1.9 Comp Rig