RCCrawler Forums

Chaotic Crawlers · 12-24-2009, 03:52 PM

Chaotic Crawlers is proud to present the
Mini NiNo2
Competition chassis!

The Mini NiNo2 chassis is based off the original Mini NiNo chassis that has been dominating the 1.9 scene in utah for a year now and has become the chassis to have!
The Nino chassis has been taking win after win in utah since it's release last year!

The Mini NiNo2 chassis was designed to allow a much more narrow skid over stock.

We wanted to keep all the great performance aspects of the original Mini NiNo chassis and add what we thought it needed to take it to the next level!

Those changes being:

We Made the Bottom section wider to allow more room for the motor
A channeled skid to give your rig that little extra clearance and to control it when it's on it's belly!
A skid that ran under the chassis plates to keep them from sliding on the rocks!
Included 4 link Plates. Front allowing a full size servo.
Pre-Removed side support on one side so your tranny has room

The Mini NiNo chassis design is a proven winner and we are excited to see more builds and more podium finishes!

The El NiNo2 Chassis Sets Include:

1/8" laser cut 6061 aluminum with a tumbled finish!
3/8" CNC cut delrin skid, then hand finished
2-50mm aluminum chassis braces
Front and rear 4 Link Plates
designed to work with Losi Mini Crawler

We had 10 sets made at first and we have sold every chassis
already locally without even posting them up for sale. So we have put
another order in for some more.
Arrival date: 2/4/10

Chassis NOW available for the new Mini Nino 2

price is $42 shipped USPS priority mail

chaoticcrawlers@yahoo.com

Build thread:
**the Chaotic Crawlers Mini Nino 2 is Finally HERE!! **

wheelhead4x4 · 12-24-2009, 10:13 PM

Does the skid come drilled for the tranns or do we have to drill it?

Chaotic Crawlers · 12-25-2009, 12:19 AM

Quote:

Originally Posted by wheelhead4x4

Does the skid come drilled for the tranns or do we have to drill it?

They don't come drilled. But I will drill them for your trans if you specify, for free!!

wheelhead4x4 · 12-25-2009, 09:01 AM

Ok have to see if there's any $ in the bank after x-mas

Chaotic Crawlers · 12-29-2009, 01:23 PM

Designed to use stock Lower link length. So all Losi Mini Crawler links work perfect...

Chaotic Crawlers · 02-01-2010, 10:27 PM

Chassis are going to be back in stock as off Feb 4th

Our first batch sold out so fast we brought in a larger quantity this time.
But if you want one, get em before their gone.

All pre-order shipments will go out asap

Price still only $40 shipped

scrogg · 02-03-2010, 12:02 AM

how and where do we order?

LDogg · 02-03-2010, 04:49 PM

Send him a PM to order. Great Chassis BTW, I love mine.

scrogg · 02-03-2010, 05:11 PM

Thanks.

Question concerning the drilling for the transmission as mentioned above. Is there a difference in the way the transmissions mount? I am currently running the stock Losi MRC tranny but would like the option to upgrade in future.

At the very least, I guess having it drilled for the stock tranny now would work and then deal any mods as they happen. Is the option to have it drilled good for anyone who orders?

Chaotic Crawlers · 02-03-2010, 06:10 PM

Yes we will drill it for anyone that needs it.
It mounts just like stock but is designed to hang just barely outside of the chassis plate to give the motor clearance and to narrow the whole thing up.

scrogg · 02-08-2010, 07:40 PM

Thanks for meeting up with me on Saturday. As soon as I gather up all of the pieces/parts I'll put up a build thread as we (son and I) go. All we really need are links. Just haven't decided which way to go there yet.

Thanks again and looking forward to seeing this thing in action.

Chaotic Crawlers · 02-27-2010, 04:02 PM

All Orders have shipped out this week....

Plenty of mini chassis still available so NOW is your chance to own a chassis that will defeat all...

At 801RCC's febuary comp "cupids crawl"
the Mini Niño dominated the competition as usual.
Placing 1st, 2nd, and 4th out of the top five!

Chaotic Crawlers · 05-23-2010, 03:08 PM

Chassis Kits are back in stock

They now come with machined aluminum standoffs instead of the axial ones and hardware for the lower links.

These mini chassis have proven to perform time and time again and we anticipate our stock running low quickly. So if you want one better act fast.

Price is $42 shipped USPS priority Mail.

Paypal chaoticcrawlers@yahoo.com and we will get your mini nino on its way

12-24-2009, 03:52 PM	#1
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Chaotic Crawlers presents the Mini NiNo2 competition chassis! Chaotic Crawlers is proud to present the Mini NiNo2 Competition chassis! The Mini NiNo2 chassis is based off the original Mini NiNo chassis that has been dominating the 1.9 scene in utah for a year now and has become the chassis to have! The Nino chassis has been taking win after win in utah since it's release last year! The Mini NiNo2 chassis was designed to allow a much more narrow skid over stock. We wanted to keep all the great performance aspects of the original Mini NiNo chassis and add what we thought it needed to take it to the next level! Those changes being: We Made the Bottom section wider to allow more room for the motor A channeled skid to give your rig that little extra clearance and to control it when it's on it's belly! A skid that ran under the chassis plates to keep them from sliding on the rocks! Included 4 link Plates. Front allowing a full size servo. Pre-Removed side support on one side so your tranny has room The Mini NiNo chassis design is a proven winner and we are excited to see more builds and more podium finishes! The El NiNo2 Chassis Sets Include: 1/8" laser cut 6061 aluminum with a tumbled finish! 3/8" CNC cut delrin skid, then hand finished 2-50mm aluminum chassis braces Front and rear 4 Link Plates designed to work with Losi Mini Crawler We had 10 sets made at first and we have sold every chassis already locally without even posting them up for sale. So we have put another order in for some more. Arrival date: 2/4/10 Chassis NOW available for the new Mini Nino 2 price is $42 shipped USPS priority mail chaoticcrawlers@yahoo.com Build thread: the Chaotic Crawlers Mini Nino 2 is Finally HERE!! Last edited by Chaotic Crawlers; 05-23-2010 at 03:07 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-24-2009, 10:13 PM	#2
wheelhead4x4 Rock Crawler Join Date: Sep 2008 Location: Nashua,NH Posts: 472	Does the skid come drilled for the tranns or do we have to drill it?

12-25-2009, 09:01 AM	#4
wheelhead4x4 Rock Crawler Join Date: Sep 2008 Location: Nashua,NH Posts: 472	Ok have to see if there's any $ in the bank after x-mas

12-29-2009, 01:23 PM	#5
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Designed to use stock Lower link length. So all Losi Mini Crawler links work perfect...

02-01-2010, 10:27 PM	#6
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Chassis are going to be back in stock as off Feb 4th Our first batch sold out so fast we brought in a larger quantity this time. But if you want one, get em before their gone. All pre-order shipments will go out asap Price still only $40 shipped

02-03-2010, 12:02 AM	#7
scrogg Newbie Join Date: Feb 2010 Location: West Jordan Posts: 38	how and where do we order?

02-03-2010, 04:49 PM	#8
LDogg Rock Crawler Join Date: Dec 2009 Location: Colorado Springs Posts: 670	Send him a PM to order. Great Chassis BTW, I love mine.

02-03-2010, 05:11 PM	#9
scrogg Newbie Join Date: Feb 2010 Location: West Jordan Posts: 38	Thanks. Question concerning the drilling for the transmission as mentioned above. Is there a difference in the way the transmissions mount? I am currently running the stock Losi MRC tranny but would like the option to upgrade in future. At the very least, I guess having it drilled for the stock tranny now would work and then deal any mods as they happen. Is the option to have it drilled good for anyone who orders?

02-03-2010, 06:10 PM	#10
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Yes we will drill it for anyone that needs it. It mounts just like stock but is designed to hang just barely outside of the chassis plate to give the motor clearance and to narrow the whole thing up.

02-08-2010, 07:40 PM	#11
scrogg Newbie Join Date: Feb 2010 Location: West Jordan Posts: 38	Thanks for meeting up with me on Saturday. As soon as I gather up all of the pieces/parts I'll put up a build thread as we (son and I) go. All we really need are links. Just haven't decided which way to go there yet. Thanks again and looking forward to seeing this thing in action.

02-27-2010, 04:02 PM	#12
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	All Orders have shipped out this week.... Plenty of mini chassis still available so NOW is your chance to own a chassis that will defeat all... At 801RCC's febuary comp "cupids crawl" the Mini Niño dominated the competition as usual. Placing 1st, 2nd, and 4th out of the top five!

Sponsored Links

05-23-2010, 03:08 PM	#13
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Chassis Kits are back in stock They now come with machined aluminum standoffs instead of the axial ones and hardware for the lower links. These mini chassis have proven to perform time and time again and we anticipate our stock running low quickly. So if you want one better act fast. Price is $42 shipped USPS priority Mail. Paypal chaoticcrawlers@yahoo.com and we will get your mini nino on its way

RCCrawler Forums

Thread: Chaotic Crawlers presents the Mini NiNo2 competition chassis!