Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Losi Mini-Rock Crawler
Loading

Notices

Thread: RCROCIN's Mini Juice

Reply
 
LinkBack Thread Tools Display Modes
Old 03-01-2011, 09:10 PM   #1
Quarry Creeper
 
Join Date: Dec 2008
Location: Lansdale
Posts: 375
Default RCROCIN's Mini Juice

I purchased my mini used of RCC a few months ago. It needed a new chassis and some new links. I have all the other Y-town custom chassis already so it only made sense to go with the mini juice. Chassis was top notch. I made up new links out of delrin. I also replaced the shocs with the little Losi crawler shocks. The rig has performed awesome so far I managed to finish 5th at Motorama which I was very pleased with. Specs and pics posted below.

Losi MRC - BDW Motor Plate - Traxxas gear for front axle - RC Bros Knuckles - MIP drive shafts
Y Town Custom's Mini Juice chassis with Home made delrin bent links
Mamab 25 ESC - Castle BEC
Hitech Servo 5645
LH Pro Comps - Love these wheels
Rovers - Awesome Tires
Holmes Hobbies Motor
4PK












Last edited by RCROCIN'; 03-01-2011 at 09:14 PM.
RCROCIN' is offline   Reply With Quote
Sponsored Links
Old 03-02-2011, 10:33 AM   #2
I wanna be Dave
 
Join Date: Oct 2007
Location: Houston
Posts: 3,761
Default

Lookin Good!
4xFord is offline   Reply With Quote
Old 03-02-2011, 11:59 AM   #3
I wanna be Dave
 
Join Date: May 2010
Location: Stowe
Posts: 3,987
Default

Can't wait to comp with you on Sun.
Jslick is offline   Reply With Quote
Old 03-03-2011, 01:32 PM   #4
Quarry Creeper
 
Join Date: Dec 2008
Location: Lansdale
Posts: 375
Default

Quote:
Originally Posted by 4xFord View Post
Lookin Good!
THanks working good also

Quote:
Originally Posted by Jslick View Post
Can't wait to comp with you on Sun.
Yeah buddy I hope the weather holds up
RCROCIN' is offline   Reply With Quote
Old 03-06-2011, 07:03 PM   #5
Quarry Creeper
 
Join Date: Dec 2008
Location: Lansdale
Posts: 375
Default

Here is the wieght, shock and ride hieght setup on my mini. It has been performing extremely well. Very predictable and stable. The rovers have stock foams which at first seemed a bit soft however I have been getting excellent performance out of them. With that said I am in no rush to change them out. We had a comp today and the rocks were wet. The rovers hooked up like it was dry. I was very impressed.

I decided to switch out my servo after the comp today. The H5645mg was not performing well. I swapped it with my Savox servo from my Scaler. Model (SC 1256tg - 277oz torque). It has been working fine on my scaler buy have not really worked like I will with the a crawler. I will let you know how it performs.

The Mini Juice chassis was very easy to setup and the break over is a real advantage.

Shocks
Rear Down travel limited 5/8"
Front Down Travel limited 1/2"

Ride Hieght
Back of skid - 2 2/3"
Front of Skid - 2"

Mini no Wheels


Front Wheel Wieght


Rear Wheel Wieght


Total Wieght

Last edited by RCROCIN'; 03-06-2011 at 07:09 PM.
RCROCIN' is offline   Reply With Quote
Old 08-03-2011, 09:23 PM   #6
Quarry Creeper
 
Join Date: Jul 2011
Location: Hemet
Posts: 279
Exclamation

Quote:
Originally Posted by RCROCIN' View Post
Here is the wieght, shock and ride hieght setup on my mini. It has been performing extremely well. Very predictable and stable. The rovers have stock foams which at first seemed a bit soft however I have been getting excellent performance out of them. With that said I am in no rush to change them out. We had a comp today and the rocks were wet. The rovers hooked up like it was dry. I was very impressed.

I decided to switch out my servo after the comp today. The H5645mg was not performing well. I swapped it with my Savox servo from my Scaler. Model (SC 1256tg - 277oz torque). It has been working fine on my scaler buy have not really worked like I will with the a crawler. I will let you know how it performs.

The Mini Juice chassis was very easy to setup and the break over is a real advantage.

Shocks
Rear Down travel limited 5/8"
Front Down Travel limited 1/2"

Ride Hieght
Back of skid - 2 2/3"
Front of Skid - 2"

Mini no Wheels


Front Wheel Wieght


Rear Wheel Wieght


Total Wieght
where the hell can i buy that chassis? ive looked all over!
mhflies is offline   Reply With Quote
Old 08-03-2011, 10:16 PM   #7
RCC Addict
 
Join Date: May 2009
Location: In the warmth!
Posts: 1,163
Default

Quote:
Originally Posted by mhflies View Post
where the hell can i buy that chassis? ive looked all over!
2 second search found this for ya:
http://www.rccrawler.com/forum/showthread.php?t=272958
Robotboy is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com