|
| LinkBack | Thread Tools | Display Modes |
06-07-2011, 09:54 AM | #1 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| GC3 style link/servo/batt mount?
Does anyone make a combo link/servo/battery mount like the GC3? I've been looking for a while now and no luck... it's the last thing I need for my Dinky. |
Sponsored Links | |
06-07-2011, 10:09 AM | #2 |
Quarry Creeper Join Date: Jul 2008 Location: Sedro Woolley
Posts: 440
|
rcbros sells some pretty nice ones.
|
06-07-2011, 10:11 AM | #3 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
But they are to small to fit a full size servo and lipo... right? They look to small. |
06-07-2011, 03:25 PM | #4 |
Pebble Pounder Join Date: Mar 2011 Location: SLC UT
Posts: 133
|
As far as I know the servo plate does fit a full size servo. It is slotted which allows you to adjust the servo posts spacing / position. I've never had one but thats what I gather from looking at the picture. http://cart.rcbros.com/product_info....roducts_id=183 That being said, It would probably require you to put holes in it for your own 4 bar setup |
06-07-2011, 03:41 PM | #5 |
Quarry Creeper Join Date: Nov 2010 Location: mandan
Posts: 412
|
rcbros makes a 4 link servo plate but I didn't offset the servo to one side to see if you can get a battery next to the servo. Link plates for the battery maybe a good idea
|
06-07-2011, 03:41 PM | #6 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
I think I'm going to just order all this stuff and run my battery on the rear axle... and if that doesn't do it for me, I'll just buy a piece of aluminum and make my own.
Last edited by johnnyh66; 06-07-2011 at 03:56 PM. |
Thread Tools | |
Display Modes | |
| |