comp 1.9 pro

[mmatthews]

Originally Posted by EverettY

Here is how I did it How to Narrow the stock Wheels

Thanks for the information. I'm going to give this a try. Any issue with the beadlock holding the tire after the narrow job?

[EverettY]

Originally Posted by mmatthewslosiminipro

Thanks for the information. I'm going to give this a try. Any issue with the beadlock holding the tire after the narrow job?

Nope not at all almost seem to hold better

BTW Marcus did you end up getting the new wheels?

[lowridinjuggalo]

No prob with bead holding. The black ring that u have to narrow I glued mine to the wheel make it a lot more easyer to mount every thing up


Not yet man working on it

[mmatthews]

"I glued mine to the wheel"

That's a good idea.

[lowridinjuggalo]

O yea make it almost to easy to mount everything up it was a pain before I glued

[hillbillyrc]

Originally Posted by lowridinjuggalo

O yea make it almost to easy to mount everything up it was a pain before I glued

you are talking about the inner lock ring right?

[lowridinjuggalo]

Originally Posted by hillbillyrc

you are talking about the inner lock ring right?

Yes the black ring

[lowridinjuggalo]

the 1.9 is ready to take the win at tomorrows comp...

[EverettY]

Originally Posted by lowridinjuggalo

the 1.9 is ready to take the win at tomorrows comp...

Cool got any updates that you've done to it to make it better?

[lowridinjuggalo]

So far nothing it seems to work great just the way it is

[EverettY]

Originally Posted by lowridinjuggalo

So far nothing it seems to work great just the way it is

As you proved at ECC

[lowridinjuggalo]

Well the 1.9 did it again it took the win at our local comp on sat. I striped out the pinion grub screw on the 3rd course and could not finish my run. Truck worked amazing

[lowridinjuggalo]

Just a small update. My losi mini slider motor is getting worn out I got it over hot the other day so I finally desided to try out a Holmes hobbies mini motor that I picked up used at ecc. I have ran a batt threw it I like the start up and the low end it could use a lil more wheel speed the mini slider motor has more any one have a pinion they like on these motor with out burning it up lol

[EverettY]

I love my Holmes motor I've never had probs with it... ON second thought it quit on me once but I just rebuilt it and it works good as new again .

Now you gotten the new wheels?

[lowridinjuggalo]

Originally Posted by EverettY

I love my Holmes motor I've never had probs with it... ON second thought it quit on me once but I just rebuilt it and it works good as new again .

Now you gotten the new wheels?

What pinion u running on it.

No new wheels yet

[EverettY]

Originally Posted by lowridinjuggalo

What pinion u running on it.

No new wheels yet

I'm pretty sure it's a 14T

[lowridinjuggalo]

Originally Posted by EverettY

I'm pretty sure it's a 14T

How is the heat start up and low end lol

My mini slider I been runing a 12t pinion wheel speed is good start up could better low end is ok its a good decent cheap set up lol

[lowridinjuggalo]

Well I took the mrc for a practice run after the motor got in it and broke my first stock drive shaft have to look in to some stronger ones for it

[lowridinjuggalo]

Her is a pic if the damage

[lowridinjuggalo]

It is very torquey lol that's for sure I love the low end and the start up