comp 1.9 pro
 

ok this is my first build thread so bear with me plz... it is very close to a stock mrc pro. with a few little mods. im running stock esc (for now), 645 servo, castle bec, mini slider motor 12t pinion, stock sper gear, 1.9 rover, stock foam in front, nova in rear, over drive in the front axle. rear bent links. losi stock rtr mrc springs in the rear the silver ones, mini t soft rear sprints in the front. 3 hole pistons with 35w oil in driver and passenger front and passenger rear, 50w in driver rear. now that all that is out the way on to some pics..

here a pic of the overdrive

http://i191.photobucket.com/albums/z...o/IMAG0496.jpg


onto my electronic set up

http://i191.photobucket.com/albums/z...o/IMAG0456.jpg

http://i191.photobucket.com/albums/z...o/IMAG0568.jpg

the rear stock wheel i narrow

http://i191.photobucket.com/albums/z...o/IMAG0501.jpg


gives u a idea how narrow they r

http://i191.photobucket.com/albums/z...IMAG0350-1.jpg


front wheels i leaft stock. i put some wire under the bead lock ring just wraped it around the wheel. i went to my local hard wear store and picked up some grub screws. they r screwed in to the holes in the stock wheels for more weight on the front. i dont like to put stick on weights in these small tires. makes the foams not work like they r supose to. in my opinion

http://i191.photobucket.com/albums/z...o/IMAG0498.jpg


what it looks like all to geather

http://i191.photobucket.com/albums/z...o/IMAG0569.jpg

http://i191.photobucket.com/albums/z...o/IMAG0570.jpg

http://i191.photobucket.com/albums/z...o/IMAG0571.jpg


on to a flex shots

http://i191.photobucket.com/albums/z...o/IMAG0572.jpg

http://i191.photobucket.com/albums/z...o/IMAG0573.jpg


thanks for checking out my lil mrc pro. if y have any ? let me know ill do my best to answer them...

Re: comp 1.9 pro
 

Why'd you paint the heads of the grub screws and beadlock screws "rust" color? :lmao:

The truck seems to work well for you...did you ever finish the underdrive mod?

Re: comp 1.9 pro
 

Cuse it was easy to do lol

No still waiting on the. Lhs to get some more pinions in

Re: comp 1.9 pro
 

Lookin pretty good brother "thumbsup" "thumbsup"

Re: comp 1.9 pro
 

So why do you narrow the rear wheels?

Re: comp 1.9 pro
 

Thanks man

I narrowed them to round the top of the tire. U can also do it by over stuffing the tire with foam but that makes the tire hard

Re: comp 1.9 pro
 

The narrowed wheels would probably work better up front...

Re: comp 1.9 pro
 

I like them better on the back with vertical climbs the tire don't give out so I get more reach on long vertical climbs it loosed some tracktion some so its less likely the front end will try flop over the rear end in my opinion


On the other hand when I switch to knuckle weights on the front I will prob have to narrow the fronts aswell for clearance prob

Re: comp 1.9 pro
 

Looking good man! This thing was working well at the last comp....:mrgreen:

Re: comp 1.9 pro
 

Thanks man u did really well with it 1st place if I remember right

Re: comp 1.9 pro
 

Look what showed up in the mail today sidewinder micro crawler mafia 18t double motor used picked up off rcc

http://i191.photobucket.com/albums/z...o/IMAG0608.jpg


Picked up a used bug body of rcc

http://i191.photobucket.com/albums/z...o/IMAG0609.jpg

Re: comp 1.9 pro
 

Cool deal...the motor is the Crawler Mafia Black Market motor...a double wind 18t 8)

Watch for flying parts :twisted:

Did you get those rear weights mounted yet? I think this rig needs the 8711 servo off of your berg...

Re: comp 1.9 pro
 

A buddy of mine made these for me

http://i191.photobucket.com/albums/z...o/IMAG0610.jpg

And mounted

http://i191.photobucket.com/albums/z...o/IMAG0611.jpg

http://i191.photobucket.com/albums/z...o/IMAG0612.jpg


They r right at a oz a peace

Re: comp 1.9 pro
 

That's what I said lol

Yes mounted lol I gotta fix the case before the 8711 make the trip over to 1.9

Re: comp 1.9 pro
 

If a zip tie works on the berg...why not on the 1.9 :lmao:

Re: comp 1.9 pro
 

Lol that was a in the field getto fix for finals not a permit fix

Re: comp 1.9 pro
 

Got everything back to geather

Got the rear knuckle weights mounted

http://i191.photobucket.com/albums/z...o/IMAG0615.jpg



Tell me what u think any ideas

Re: comp 1.9 pro
 

Sooo...how's the new motor and ESC?

Re: comp 1.9 pro
 

The esc is great motor need some help but we working on it

Re: comp 1.9 pro
 

Truck looks good I like the narrowed wheels . I may have to give that a try. I am new to the 1.9 comp thing is it the 1/16th revo gears in the front for that mod?