RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Losi Mini-Rock Crawler (http://www.rccrawler.com/forum/losi-mini-rock-crawler/)
-   -   its time! full on BWD mini mantis.. test, tune an crawl! (http://www.rccrawler.com/forum/losi-mini-rock-crawler/413906-its-time-full-bwd-mini-mantis-test-tune-crawl.html)

boosted4lyf 11-22-2012 08:09 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Just throw a few small washers between the servo and the mount. It will bring it out some but still tighten down just fine

winnerone23 11-23-2012 08:42 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Yeah, no worries on that.. the wheel base is short yet an I think I'm goin to cut a servo/4 link mount anyway, I have to get the servo off to the side enough for the rr axle top battery mount to secure on an a 300mah 2s to fit.. I THINK, that's the direction I'm goin.. not much room on the front upper links to mount anything..

mhflies 11-25-2012 02:58 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
try two 1 s lipos with 300 mah, and do a y... (: , put a little battery on each side of the servo, would look clean, and keep the weight low! now just to find a 1s lipo! haha

winnerone23 11-25-2012 06:13 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Oh I can find them.. good idea, thanks.

Ok a little work and teaser of the red CF to come..

http://i1147.photobucket.com/albums/...C71CC-orig.jpg

Now of to the cabin for the first day of buck season tomm!

Hittman 11-25-2012 11:03 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Dammit! Now I have to comment on this servo guard too:ror: Looks good man.. I cannot wait to see what mine looks like8)

boosted4lyf 11-25-2012 11:35 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
http://i779.photobucket.com/albums/y...5319C942C0.jpg


:flipoff:

winnerone23 11-26-2012 12:03 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
I got ur barber pole! :flipoff:

Tho it almost makes jd's idea sound better... Almost..

http://i1147.photobucket.com/albums/...9DA9F-orig.jpg

I have new plans tho.. always changing..

EverettY 11-26-2012 12:36 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
How did you bend the CF? Awesome looking Servo Guard... Sad that it has to get scratched... it's almost prettier than the servo :ror:

boosted4lyf 11-26-2012 12:53 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
You can buy carbon angled, c channel, tube, etc. and the tree pic is great!
Shouldn't you be out hunting Troy?

winnerone23 11-26-2012 08:02 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Actually, I did bend the CF.. I bit of slow heat an lite pressure, till it gets to shape, when.it cools off, its as strong as before..
Yeah, it was a pretty nice day out but bad for huntin..

Thanks, jd said it would look like a candy cane, which I didn't like, so I figured a pic in the tree was good.. that an it fellow with the shrubbery giveaway..

boosted4lyf 11-26-2012 08:39 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Well that carbon looks decent nice job with the bends"thumbsup"

Hittman 11-26-2012 11:08 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Quote:

Originally Posted by winnerone23 (Post 4033427)
Actually, I did bend the CF.. I bit of slow heat an lite pressure, till it gets to shape, when.it cools off, its as strong as before..

Well arnt you just Mr. Fancy Pants:flipoff:

winnerone23 11-26-2012 11:14 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Thanks guys, I try... I do like working with it.. I ran out of material for extras tho.. ill be getting more once I can..

winnerone23 11-28-2012 12:05 AM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Small update.. it is hunting season around my parts..

White Mrc jeepindoug cups showed up today..

http://i1147.photobucket.com/albums/...B54BF-orig.jpg

I also pre cut the hood, roof, an goin to test tail panels out.. had to heat an arch the roof panel..

http://i1147.photobucket.com/albums/...677FC-orig.jpg

I may get this little one built yet.. lol
Fxr is gettin mailed for it tomm..
Vp wraith stage 1 kit is mailed for it as well.. then I think I have all the parts to finish it up..

winnerone23 11-29-2012 11:08 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Some pics for ya to look at.. some questions to pass around..

http://i1147.photobucket.com/albums/...C46B3-orig.jpg

http://i1147.photobucket.com/albums/...95A30-orig.jpg

http://i1147.photobucket.com/albums/...F644D-orig.jpg

First question for you guys is this.. is the servo guard too much or is it just me?

http://i1147.photobucket.com/albums/...9FDC5-orig.jpg

Next up is my tail panel. It's goin to be screwed into just the rear links at the chassis an the cab/chassis screw above it.. its for looks an to let the chassis design stand out.. it just floats in the rear towards the axle mount, that way it doesn't interfere with the torsion.. its just in there, not done..

http://i1147.photobucket.com/albums/...CD1CE-orig.jpg

Question here is, should I leave the back window of the cab open like above?


http://i1147.photobucket.com/albums/...71507-orig.jpg

Or running with the shape of the cab? Or opposite the tail lines?

http://i1147.photobucket.com/albums/...B094C-orig.jpg

Or I can run them the same way as the cf in the tail..

More to come after tomm afternoon..

Hittman 11-29-2012 11:24 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
First off,, Panels just look amazing. You have done a very good job at cutting them out and getting the direction on the hood and roof to match. They match the shape of the roof so well! It really is hard to believe that they were cut out by hand. The red accents the white so nice8)

Second, Yeah, now that I see them all together, I do think that the red servo guard is a little too much. I think a regular cf guard would look much better"thumbsup"

Third, Tail panel is awsome. I think it is definitely needed to help show off the chassis. Personally, I think you should leave the rear window blank. I feel that is you put the red cf there, it will start to flow and not have any breakage between the pannels and will all look like one. I understand why you were thinking of putting the red there, I just think its too much.

All in all great update. Rig is coming along nicely brotha. It is getting the treatment it deserves8)

EverettY 11-30-2012 08:42 AM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
I agree with Christian... They look amazing! And they go with the white awesome!

IDK the red doesn't look bad for the servo guard at all... it's personal preference though...

I'd also say leave the cab windows open... it get's to be too much CF when you put it there... It looks cleaner that way too...

And with the tail panel... IDK about having that... it might limit flex and if you have a side panel you should do it more forward like the regular Mantis and make it red... just my $.02 "thumbsup"

You're doing an awesome job with this... except for the fact that you haven't gotten it out and driven it :ror:

winnerone23 11-30-2012 05:01 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Thanks boys.. yeah I liked the side window open as well, I didn't see it till I was done tryin to figure out what I was putting there.. lol..

I'll run it with the red guard as its on there.. then ill switch it to the cf guard an see what it looks like.. mail man did a great job today! Now I have lots of busy work an no excuses.. ;) other then the next week doe..

http://i1147.photobucket.com/albums/...6823C-orig.jpg

Bwd bombproof shock/link mounts for the rear, vp wraith chubs an knuckles for the steering mod, the fx-r , oh yeah!

http://i1147.photobucket.com/albums/...CA38B-orig.jpg

A pic of the knuckle weights for it, which I had just didn't post a pic. If I need them, as I'm goin to cut some cf weight holders for the wraith knuckles an see if It's enough weight. (Yes I know the vp knuckle weights don't fit the wraith knuckles.... Yet! )

http://i1147.photobucket.com/albums/...75A48-orig.jpg

EverettY 11-30-2012 05:22 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Wow... whatcha doing with the lockouts? Using those too? That's going to look sick! Also are the VVD's going with this?

Hittman 11-30-2012 05:37 PM

Re: its time! full on BWD mini mantis.. test, tune an crawl!
 
Good pile-o-parts you got there.. I cant wait:twisted:


All times are GMT -6. The time now is 03:03 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com