12-23-2012, 03:19 AM | #141 | |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: its time! full on BWD mini mantis.. test, tune an crawl! Quote:
| |
Sponsored Links | |
12-23-2012, 11:46 PM | #142 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Ok, so I got a little visit from santas helper, lol, in the form of addicted2rc.. So from there I noticed without the wheel wideners on, the beadlock screws were wearing on my Dlux knuckle weights. So the wideners went back on.. but it put me at 8.25" track width.. so I went back to the idea of the modlocks being a adjustable wheel width.. so I got to work.. Stock.. front an back.. So I drilled some holes for depth check, then I was goin to take out the sections between the 6 beadlock screws, but there was more material there then I thought.. so I just dremeled it out.. And the diff is... One part wasn't taking the bead good enough so I did a little bit more, then I started the second wheel.. I only use 3 screws to hold the two pieces of wheel together.. Both done an have good beads locked in.. Oh, in between wheel one an wheel two, I emailed Don.. I asked for two milled the correct way for this mod, but I'm not good at waiting.. when he can get them mailed out ill switch them to stock way an use the two new faces. I don't feel that this took away from any structural integrity.. if it comes to be, I can just run every other bead lock screw in from each side to catch both wheel pieces. That will make it as one wheel an subtract the foam support from bein the only thing that holds the two pieces of wheel together.. On to final product mounted.. This puts me at 7.75" track width an took the roller skate look away from it an put the inner bead lock screws outside of my knuckle weights.. Looks like a pro rig now, I like it.. out to the rocks tomm for testing. I know, it seems like a lot just to switch the whole front axle over next week.. I want to know every change an every pro an con of every change tho.. the way this chassis works, this will be my number 1 comp rig. Test an tune is all I have left.. maybe even a brace in the tail section.. time will tell.. happy holidays an a merry xmas.. |
12-24-2012, 10:06 AM | #143 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Ya coulda just narrowed your wideners some anyway good job on it You getting some more vids? Cause I'm leaving tomorrow so IDK if I can post them for ya...
|
12-24-2012, 12:44 PM | #144 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
I thought bout that.. but may need the wideners else where.. that an this is reversible.. narrowing the wideners isn't.. Doubt ill get any video.. I did get to run a pack thru it tho. Night an day.. between the beadlock screws not binding on the weights to the wheels bein so wide that the knuckle weights would hit the rocks cause the wheels stuck out so wide.. next was the drag link an tie rod. Noticed them catching on this rig.. lack of tire height I guess.. so I went to work.. Starting point.. I just put the tie rod over the axle, under the servo mount.. the drag link went up top.. Very clean an open in the front now.. Next, I think a straight link end at the wheel side on the drag link.. |
12-24-2012, 01:02 PM | #145 |
Rock Crawler Join Date: Nov 2011 Location: Paradise, ca
Posts: 890
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Once again troy your dremel is your best friend lol looks really good though
|
12-26-2012, 09:38 AM | #146 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Thanks Chris, an you know it! I don't know what I would do without it! I think its time for a upgraded dremel tho.. I have to hold the brush cover on it to get it to work half the time..
|
01-04-2013, 08:09 PM | #147 |
ahhh S^*T Join Date: Mar 2012 Location: in the shop bending metal in Whatcom Co. WA.
Posts: 888
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
BEATme2It this little guy is looking really great!! making me want a mini comp rig again, they are so damn fun. but I have to drive 2 hours to find any comp round here. and i live in a bigger town. need to start up something here. hmmm.. how would I do that.... good work troy, keep it up. (I knw u wil) |
01-05-2013, 02:05 PM | #148 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Thanks Ryan.. want one again? What happen to the half dozen you had? I have to go atleast 2 hrs to a comp to get to one. Well worth crawling an a chance at a win! As for the mini build, I did A little, that I don't have pics of an I ordered the Dlux no slop bushings so I can finish up the xr/wraith steering mod an get the universals in.. |
01-05-2013, 02:20 PM | #149 | |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: its time! full on BWD mini mantis.. test, tune an crawl! Quote:
And come on Troy you coulda built a little course by now in the basement for this thing by now right? | |
01-05-2013, 08:46 PM | #150 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Lol, I was just talking bout bringing rock into the house for crawling with the xr.. so yeah, it will be soon.. it went from nice out, xmas, Bam! Foot of snow, 12hr shifts of plowing snow, today.. just like that... I don't have much left to do.. bushings for the knuckles, cut down xr universals, new power plant, cf beadlock rings an weight holders for the rear.. more testing.. crawl to the top of the podium! |
01-06-2013, 10:47 AM | #151 |
Rock Crawler Join Date: Nov 2011 Location: Paradise, ca
Posts: 890
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Well get to we need real updates with pictures |
01-09-2013, 07:22 AM | #152 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Not a huge update but leads to better things an more work can be completed.. Paper thin, single layer of CF.. only attached at the chassis at lower links an cab mount screw. Free floating in the rear. Dlux no slop bushings for the wraith knuckles.. Knuckle weights cut for weight.. The weight will get drilled an tapped for a set screw to hold the weight against the knuckle an 3 stock screws to hold it to the face will go in.. a little heavy yet, not by much, so a little more cutting may be in order.. |
01-10-2013, 09:32 AM | #153 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Moving forward.. Dlux no slop bushings, an vp knuckles modded for wraith knuckles.. The screw is for visibility, it will be replaced with a link end set screw.. The axle sits at 6" at the face of the knuckles, which is bout .5" wider then the face of the lcc knuckles on the axle now. The lcc axle has wideners an leaves me with a 7.5" track width, so plenty of room for testing.. |
01-12-2013, 07:46 AM | #154 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
New motor showed up, yay! Thanks to motorman1600, custom handwound 27t.. As I'm running a 33t HH mini right now, ill get more torque an wheel speed on 2s with this motor... I'm not a big fan of the 17-18t motors. So the option of wind I wanted was awesome! |
01-12-2013, 12:00 PM | #155 |
Rock Crawler Join Date: Nov 2011 Location: Paradise, ca
Posts: 890
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Wow bud that is looking better and better and better everytime i look
|
01-14-2013, 03:43 PM | #156 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Got a rtr weight today, as it sits with the Dlux weights an lcc modded axle and bout a pound lighter then my mini juice! 2lbs 8.2oz... I'm not sure it matters as much with the little guys but I'm loving how it works an now I got some time, since my xr is up an running an parts I was making, out of the way.. I'm back on route with the xr steering.. which may add some weight in the long run but should be better steering. Making it work while! |
01-14-2013, 04:24 PM | #157 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
WTH your Mini Juice is 3 lbs 8 oz That's like what people are getting their XR's to now days |
01-14-2013, 07:19 PM | #158 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Lmao! How bout it... I would have to go back thru my build thread an look.. but yeah its a tank
|
01-15-2013, 08:14 AM | #159 |
Rock Stacker Join Date: Dec 2012 Location: Starkville
Posts: 92
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
The mini is looking nice!
|
01-15-2013, 12:54 PM | #160 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: its time! full on BWD mini mantis.. test, tune an crawl!
Thanks drew! Now just to get it finished.. then ill be happy with it.. Haha, for time bein anyways..
|
Tags |
baby mantis, bwd, mantis, modlocks, pro, rovers, wicked cricket |
its time! full on BWD mini mantis.. test, tune an crawl! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scale run and comp test and tune Sunday the 19th at mini moab | Sheepdawg23wm | Arizona | 41 | 08-22-2012 09:18 PM |
Mini Moab test & tune..Sunday Sept 18 | CRAWLER-DAD | Arizona | 26 | 09-20-2011 03:49 PM |
3 BWD mini test vids | scatterbrains | Videos! | 2 | 08-02-2010 07:41 PM |
| |