Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Losi Mini-Rock Crawler
Loading

Notices

Thread: Losi Jimny Scaler

Reply
 
LinkBack Thread Tools Display Modes
Old 08-22-2015, 12:26 PM   #1
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Losi Jimny Scaler

Not quit sure where to post this..

I have a Tamiya Jimny and the stock chassis is more on road.

The Losi Mini-Crawler axles are just about the right width..
Sooo



Thought I could cut down a Axial Chassis but still too big.
Decided to try and make my own chassis rails..



Well... Little bit of a learning curve..
Stretched the wheelbase a 1/2"inch (may need to be 5/
1.55 wheels and RC4WD Mickey Thompson Baja MTZ ( just a hair on the small size)
This will be my ride height.





I'll be redoing the chassis to make room for steering linkage and shocks.

Soo far I don't like the small 2mm hardware and my drives lines are a 1/2"inch short..

Were can I find or how can I make longer drive-lines?
Are there better mini motors?
Axle options?
re-locating shocks mounts on axles. (wider mounts?)
This is my first not out of the box build.
Any advice or criticism will be welcomed.

Last edited by Zukiiholic; 08-22-2015 at 12:30 PM.
Zukiiholic is offline   Reply With Quote
Sponsored Links
Old 08-22-2015, 11:12 PM   #2
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

I have realized that I'm coming in a bit late for Losi Mini Crawler info..
About 5 yrs. LOL..
I did go thru the Losi MRC Ultimate Guide

Scaler chassis links were Dead..
So I attempted to make my own, Gonna have to redo it tho..
My biggest issue is drive lines are too short now..
Any hints on making them longer would be Just Great..
I'll fake the rest.
Zukiiholic is offline   Reply With Quote
Old 08-24-2015, 03:08 AM   #3
Pebble Pounder
 
Join Date: Feb 2015
Location: Cambridge, UK
Posts: 147
Default Re: Losi Jimny Scaler

If you need driveshafts I'd look at the SDI4x4 shafts as they are very strong and scale looking

PROPELLER SHAFT - Scale Designs International

Nice work BTW!
jimbo_wa is offline   Reply With Quote
Old 08-24-2015, 11:00 PM   #4
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Prop Shafts, Didn't even think about those.
Thanks.
Zukiiholic is offline   Reply With Quote
Old 09-01-2015, 09:47 PM   #5
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Didn't like the first chassis so I tried making another one.
Still some kinks to work out.
Need to kick out the frame rails right after the link mounts so they don't rub the frame.
Shocks mounted on top of the axle using the Lock-out top screw.
Hope that holds..
Ride height and wheelbase seems about right.


Zukiiholic is offline   Reply With Quote
Old 09-02-2015, 10:38 PM   #6
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

This is my axle shock mount for now..



I doubt they will hold up too well but for now, it helps it sit on it's own.
Still thinking of a better way to do it..
Zukiiholic is offline   Reply With Quote
Old 09-03-2015, 09:09 PM   #7
Rock Crawler
 
Join Date: Mar 2015
Location: Waltham
Posts: 707
Default Re: Losi Jimny Scaler

I can't wait to see this one finished up. Ever since I saw that kit come out I wanted to see someone build a solid axle version.
JohnnyAnguish is offline   Reply With Quote
Old 09-04-2015, 12:02 PM   #8
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Thanks.. When I originally bought the kit, I was gonna run it as is..
After getting the chassis together and running it around, I figured it wasn't gonna work well for a crawler
with a On-road chassis..

Thanks to Tammies Hobbies for the extending the drives lines Idea and flexychevy for the extra drive line parts.
I got the drive lines figured out..
Used 2 female ends with the male shaft in between
aka: WildBoar style drive lines..
So simple, the solution escaped me..


Now to make the battery and Electronic mounts to stiffen up the frame.
Zukiiholic is offline   Reply With Quote
Old 09-04-2015, 12:13 PM   #9
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Thanks to Billet Works Designs
Their Labor Day sale ad popped up with just the right Parts I needed and
On Sale. .



Now I don't have to worry about my poor axle shock mounts pulling out..
Sweet..
Zukiiholic is offline   Reply With Quote
Old 09-13-2015, 12:59 AM   #10
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

3rd Shot Chassis.
Or..
3rd times a charm.. ;)

I think a 4th time would be Awesome...

My Links were hitting the chassis and binding up the flexing..
Soo,
Made another chassis with the skid below the chassis to make room for
the links..
Works much better..
Waiting for the new axle shock mounts from Billet Works Designs,
and New shocks and 1.55 BFG Mudders from Ebay to get here.


Still need to lower it a bit, I want the shocks to be at least 50/50.
Right now it sits about 85/15% (almost fully extended)



Can't wait to paint it but body posts are consistently moving during the build.
Still debating on color too..
Zukiiholic is offline   Reply With Quote
Old 09-20-2015, 12:44 AM   #11
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Received my parts from Billet Works Designs.
Having a wee bit of a problem finding 2x18mm screws to hold the shocks
on. Removed the lower Ball to use 3mm screws but I'm guessing there is gonna
be some flex issues.


Also got my 1.55 BFGs (Mud Thrashers) and wheels from Ebay. Only a 1/2"inch taller and wider
than the RC4WD M/T Baja MTZs.
Now they look too big.

Made up some front shock tower/body mounts to level it out too..




I was really hoping for the same size as my Old Tamiya BFGs But they are 1.9s
and hard as a Rock.. but they are the right size and look good.. Dang!!



Still debating on color and body mounting.
Red or Blue for color.. Maybe..

Last edited by Zukiiholic; 09-20-2015 at 12:48 AM.
Zukiiholic is offline   Reply With Quote
Old 09-21-2015, 07:33 AM   #12
RCC Addict
 
Join Date: Nov 2008
Location: Bunnell, Fl.
Posts: 1,292
Default Re: Losi Jimny Scaler

That's a cool little rig!
HDMM is offline   Reply With Quote
Old 12-01-2015, 09:33 PM   #13
Pebble Pounder
 
Join Date: Jun 2014
Location: MA
Posts: 152
Default Re: Losi Jimny Scaler

dont usually like to go with box color but i think blue would look good with those black wheels of yours

professorcake is offline   Reply With Quote
Old 12-02-2015, 12:33 PM   #14
RCC Addict
 
Join Date: Jan 2009
Location: Bend
Posts: 1,577
Default Re: Losi Jimny Scaler



89redranger is offline   Reply With Quote
Old 12-03-2015, 09:44 PM   #15
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Quote:
Originally Posted by professorcake View Post
dont usually like to go with box color but i think blue would look good with those black wheels of yours

I didn't want to go with the box color either but it looks just right in blue.
Installed the Mud Thrashers on Black wheels already..

Quote:
Originally Posted by 89redranger View Post


Yaa, that was part of the inspiration for the built.
Now if I can just find those tires in the in that size..

Last edited by Zukiiholic; 12-03-2015 at 09:48 PM.
Zukiiholic is offline   Reply With Quote
Old 03-09-2016, 02:13 PM   #16
Quarry Creeper
 
Join Date: Mar 2010
Location: SF East Bay
Posts: 451
Default Re: Losi Jimny Scaler

I've got something similar to this in the works, still have to finish the stock kit though. Too many projects, not enough time.

From my experience, the only thing I would add is you can make a temporary chassis using 1/4" thick lexan or delrin sheet, until you are happy with the results, then use that as a template to cut out of aluminum or steel sheet. I kinda like the flexy plastic ladder chassis; it's like having a torsion chassis for an additional 1/2" of flex.

The SDI shafts are a good find.

Any updates?
K.O.M. is offline   Reply With Quote
Old 03-09-2016, 08:13 PM   #17
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

kind've on Hold..
I've been thinking about using a MST CMX for a chassis.
Hidden bodyposts or not.
Interior or not..
Color..
Purpose..
I'm really good at starting Projects.. ;)
Zukiiholic is offline   Reply With Quote
Old 04-23-2016, 06:08 PM   #18
Pebble Pounder
 
Join Date: Sep 2015
Location: Germany
Posts: 151
Default Re: Losi Jimny Scaler

Nice the only way to go is "straight axel" if it get to be scale. And only Losi,Kulak,Slickrock have right dimension of the axels.

My Samurai rides also on a MRC chassis,without a scale chassis but lowered and drooped shocks.
Traildriver is offline   Reply With Quote
Old 07-27-2016, 05:16 PM   #19
Pebble Pounder
 
Join Date: Sep 2015
Location: Germany
Posts: 151
Default Re: Losi Jimny Scaler

More to come?
Traildriver is offline   Reply With Quote
Old 07-27-2016, 11:17 PM   #20
Rock Crawler
 
Zukiiholic's Avatar
 
Join Date: Apr 2014
Location: Portland
Posts: 835
Default Re: Losi Jimny Scaler

Not happy with my frame.
Seems Flimsy.
Still thinking about the MST CMX or some Chinese frame.
1 10RC Crawler Chassis for Axial SCX10 SCX 10 Tamiya Land Rover D90 | eBay

Or other Vendor here.. ;)

I do want to use the Axial tranny w/slipper clutch and 540 motor

In the mean time, working on my other Zuk..
Zukiiholic is offline   Reply With Quote
Reply



Losi Jimny Scaler - Similar Threads
Thread Thread Starter Forum Replies Last Post
Samurai/ Jimny Bodies meanbgreen General Scale Talk 16 01-11-2016 10:16 AM
Project Samurai/ Jimny meanbgreen 1.9 Scale Rigs 126 12-17-2015 10:01 AM
Tamiya Jimny SJ 30 body? dusty husky 1.5 Scale Rigs 0 11-02-2012 05:43 PM
Kyosho Rock Force 2.2 Suzuki Jimny Kit w/ dig available Reef RCP Crawlers 4 08-21-2011 12:19 AM
if you want a samurai jimny or sj body, post here neightfrog General Scale Talk 3 10-10-2008 10:23 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com