12-19-2017, 03:59 PM | #1 |
Newbie Join Date: Oct 2014 Location: Eldersburg
Posts: 6
| New brushed ESC needed
Can anyone recommend a brushed ESC with reverse to replace the stock unit? After the factory servo stopped working I replaced the servo with a Savox mini servo but when I plug the servo in it will not drive and steer at the same time and the servo is sooooopo slooooow. The servo works great using the same receiver and a 1:10th ESC. Thanks in advance |
Sponsored Links | |
12-19-2017, 04:22 PM | #2 |
Rock Crawler Join Date: Oct 2009 Location: RC Blackhole
Posts: 513
| Re: New brushed ESC needed
i run an FXR in mine. you just might need a BEC. the stock ESC probably does not produce enough power for the new servo and the BEC will power the servo.
|
12-19-2017, 05:19 PM | #3 |
Quarry Creeper Join Date: Aug 2014 Location: Glendive, Montana
Posts: 322
| Re: New brushed ESC needed
I run the Tekin B1R's in two of my mini's. But I am also running a castle bec with full size servo. They have been great esc's for me.
|
05-11-2019, 08:37 PM | #4 |
Rock Crawler Join Date: Mar 2009 Location: Frisco, Texas
Posts: 721
| Re: New brushed ESC needed
I run the FXR in mine, and have for years. Turnigy 2s 900mah lipo and a massive turnigy 959 servo, no issues, and surprinsly no BEC. A risk im willing to take, but its had hundreds of hours on it with the same setup for about 6-7 years.
|
New brushed ESC needed - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dual Brushed ESC w Single Brushed Motor | Creepcreep | Newbie General | 3 | 01-22-2016 12:04 PM |
| |