HSP/ECX Parts Sharing
 

Hi Losi mini fans,

Can anyone confirm which Losi mini crawler parts would fit an ECX Barrage? Thanks,
MP

Re: HSP/ECX Parts Sharing
 

The shocks do with hardware for the shocks. If you get the aluminum threaded mini crawler shocks they are much better than the stock barrage shocks.

I pretty sure other parts could fit with an enough testing and maybe some modding.

Re: HSP/ECX Parts Sharing
 

Yes almost all parts are interchangeable axle wise, not sure about the rest of the truck but I wouldn’t be surprised


Sent from my iPhone using Tapatalk

Re: HSP/ECX Parts Sharing
 

Does the Barrage have CVDs?
If so, this could be a much needed upgrade for all MRCs and Slickrocks.

Re: HSP/ECX Parts Sharing
 

They do but are setup with a wheel widener with the stub shaft so to run them would need to be cut down and new threads cut.
V1 ecx barrage cvd
https://www.hobbytown.com/barrage-fr...212025/p538082

Mrc cvd
https://www.spektrumrc.com/Products/...rodId=LOSB1455

But doing the research for this post it looks like the ecx barrage doomsday are the mrc ticket you can be the judge.
https://www.amainhobbies.com/ecx-bar...222002/p681178

Re: HSP/ECX Parts Sharing
 

That looks indeed very promising!
Part number for a set of axles (front and rear) is ECX222002, but seems to be out of stock everywhere over here at the moment.
I will keep an eye on this one "thumbsup"

Re: HSP/ECX Parts Sharing
 

https://m.ebay.de/itm/New-ECX-Barrag...sAAOSwLJ9Z6p1z

Free shipping from usa

Re: HSP/ECX Parts Sharing
 

Well spotted, Sir!
Just ordered it. I will keep you guys posted!

Re: HSP/ECX Parts Sharing
 

I'm curious myself.

Re: HSP/ECX Parts Sharing
 

Oh, really. *snap snap snap*


[emoji23]

Re: HSP/ECX Parts Sharing
 

Lol, I wish I never traded my mrc

Re: HSP/ECX Parts Sharing
 

Those axles are for the ECX Barrage Doomsday 1/12 scale, not the 1/24.

Re: HSP/ECX Parts Sharing
 

This is in the 1/18 mini section not the micro. The 1/12 barrage is a bastrad rig with 1/18 axles and trans and 1/10-1/12 chassis rails.

Re: HSP/ECX Parts Sharing
 

What about this? https://www.hobbytown.com/1-18-spool...212009/p451218

Tried to find dimensions but no luck. Wondering if it will drop into the mrc axle housing. It has the same tooth count. Just need to know if width and bearing size are the same. Looks to be a nice upgrade to the multi-piece locker that comes with mrc.

Re: HSP/ECX Parts Sharing
 

Its plastic, redcat everest16 is the same and they have a aluminum spool with gear. I hear from the barrage guys its getting hard to find cheap ATM.

At one point I believe dravtech was making a spool to work with the ecx gear for mrc axles. If that helps any.

Re: HSP/ECX Parts Sharing
 

Doomsday axles are in "thumbsup"

Attachment 369794

I will check for compatibility and will do a comparison with stock MRC dogbones and CVDs sometime soon.

Re: HSP/ECX Parts Sharing
 

Not good. Looks like the Doomsday axles are way to long. Maybe they can be trimmed. We will see.

Comparison:
Attachment 369797

Doomsday axles

MRC stock dogbone

MRC CVD (LOSB1455)

3Racing CVD for MRC

Re: HSP/ECX Parts Sharing
 

Any updates

Sent from my SM-N960U using Tapatalk

Re: HSP/ECX Parts Sharing
 

My buddy has an original Losi MRC and I have an ECX temper a lot of parts are interchangeable. I also recently bought a ECX barrage doomsday from my LHS for $100 since they're getting discontinued I assume, I'll just put a regular barrage body on it. Any aftermarket temper part should fit a barrage. I plan on taking out the barrage front CV's and seeing how much cutting they need to work in a mini. I am trying to turn my temper into a comp style rig.

https://pix.sfly.com/AnJvN7
https://pix.sfly.com/iMRBk4

Re: HSP/ECX Parts Sharing
 

Do any of the folks posting with axles have a rear spare by chance. I cannot get one sent to me from any of the shops because I am in Alaska. People act like it’s another world. Hell usps costs the same even.