12-30-2017, 09:57 AM | #1 |
Quarry Creeper Join Date: Nov 2017 Location: Ulaanbaatar
Posts: 241
| HSP/ECX Parts Sharing
Hi Losi mini fans, Can anyone confirm which Losi mini crawler parts would fit an ECX Barrage? Thanks, MP |
Sponsored Links | |
12-30-2017, 08:25 PM | #2 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
The shocks do with hardware for the shocks. If you get the aluminum threaded mini crawler shocks they are much better than the stock barrage shocks. I pretty sure other parts could fit with an enough testing and maybe some modding. |
02-03-2018, 06:55 AM | #3 |
Newbie Join Date: Oct 2017 Location: Australia
Posts: 28
| Re: HSP/ECX Parts Sharing
Yes almost all parts are interchangeable axle wise, not sure about the rest of the truck but I wouldn’t be surprised Sent from my iPhone using Tapatalk |
02-04-2018, 01:40 PM | #4 |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: HSP/ECX Parts Sharing
Does the Barrage have CVDs? If so, this could be a much needed upgrade for all MRCs and Slickrocks. |
02-05-2018, 06:59 PM | #5 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
They do but are setup with a wheel widener with the stub shaft so to run them would need to be cut down and new threads cut. V1 ecx barrage cvd https://www.hobbytown.com/barrage-fr...212025/p538082 Mrc cvd https://www.spektrumrc.com/Products/...rodId=LOSB1455 But doing the research for this post it looks like the ecx barrage doomsday are the mrc ticket you can be the judge. https://www.amainhobbies.com/ecx-bar...222002/p681178 |
02-06-2018, 05:58 AM | #6 | |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: HSP/ECX Parts Sharing Quote:
Part number for a set of axles (front and rear) is ECX222002, but seems to be out of stock everywhere over here at the moment. I will keep an eye on this one | |
02-06-2018, 07:02 AM | #7 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing |
02-06-2018, 01:59 PM | #8 | |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: HSP/ECX Parts Sharing Quote: Just ordered it. I will keep you guys posted! | |
02-06-2018, 03:38 PM | #9 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
I'm curious myself.
|
02-06-2018, 03:39 PM | #10 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: HSP/ECX Parts Sharing |
02-06-2018, 03:46 PM | #11 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
Lol, I wish I never traded my mrc
|
02-06-2018, 03:59 PM | #12 |
Quarry Creeper Join Date: Jun 2016 Location: Tacoma
Posts: 267
| Re: HSP/ECX Parts Sharing |
02-06-2018, 04:53 PM | #13 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
This is in the 1/18 mini section not the micro. The 1/12 barrage is a bastrad rig with 1/18 axles and trans and 1/10-1/12 chassis rails.
|
02-06-2018, 10:38 PM | #14 |
Rock Stacker Join Date: Jan 2009 Location: Mesa
Posts: 52
| Re: HSP/ECX Parts Sharing
What about this? https://www.hobbytown.com/1-18-spool...212009/p451218 Tried to find dimensions but no luck. Wondering if it will drop into the mrc axle housing. It has the same tooth count. Just need to know if width and bearing size are the same. Looks to be a nice upgrade to the multi-piece locker that comes with mrc. Last edited by korr; 02-06-2018 at 11:32 PM. |
02-07-2018, 12:06 AM | #15 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,916
| Re: HSP/ECX Parts Sharing
Its plastic, redcat everest16 is the same and they have a aluminum spool with gear. I hear from the barrage guys its getting hard to find cheap ATM. At one point I believe dravtech was making a spool to work with the ecx gear for mrc axles. If that helps any. |
02-20-2018, 12:50 PM | #16 |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: HSP/ECX Parts Sharing
Doomsday axles are in I will check for compatibility and will do a comparison with stock MRC dogbones and CVDs sometime soon. |
02-20-2018, 02:23 PM | #17 |
Quarry Creeper Join Date: Apr 2011 Location: Germany
Posts: 320
| Re: HSP/ECX Parts Sharing
Not good. Looks like the Doomsday axles are way to long. Maybe they can be trimmed. We will see. Comparison: Doomsday axles MRC stock dogbone MRC CVD (LOSB1455) 3Racing CVD for MRC |
11-21-2018, 07:22 AM | #18 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: HSP/ECX Parts Sharing
Any updates Sent from my SM-N960U using Tapatalk |
11-27-2018, 07:26 AM | #19 |
Rock Stacker Join Date: Feb 2017 Location: Merton
Posts: 55
| Re: HSP/ECX Parts Sharing
My buddy has an original Losi MRC and I have an ECX temper a lot of parts are interchangeable. I also recently bought a ECX barrage doomsday from my LHS for $100 since they're getting discontinued I assume, I'll just put a regular barrage body on it. Any aftermarket temper part should fit a barrage. I plan on taking out the barrage front CV's and seeing how much cutting they need to work in a mini. I am trying to turn my temper into a comp style rig. https://pix.sfly.com/AnJvN7 https://pix.sfly.com/iMRBk4 |
05-25-2019, 12:43 AM | #20 |
Rock Stacker Join Date: Feb 2018 Location: Alaska
Posts: 76
| Re: HSP/ECX Parts Sharing
Do any of the folks posting with axles have a rear spare by chance. I cannot get one sent to me from any of the shops because I am in Alaska. People act like it’s another world. Hell usps costs the same even.
|
HSP/ECX Parts Sharing - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UPDATE RUN VIDEO! HSP RGT ADVENTURER 1/24 like ECX mini barrage | shenlonco | Scale Videos! | 1 | 12-04-2017 05:21 PM |
where to buy parts for 1/8 HSP Crawler in USA? | Cainlord | General Crawlers | 6 | 10-11-2014 07:10 AM |
Sharing some Inspiration | 05Fronty4x | 1.5 Scale Rigs | 3 | 03-02-2013 04:31 PM |
just sharing my version X | jayyeone | Axial AX-10 Scorpion | 7 | 01-12-2008 09:35 PM |
Thread Tools | |
Display Modes | |
| |