|
Lets do this! I got the basic upgrades!https://uploads.tapatalk-cdn.com/201...88c3f07a3a.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Quote:
Team DPC!!! |
Re: Lets do this! "thumbsup" Looks like the start of a good build. I’d recommend getting the HR aluminum diff carrier for the rear. I sheared the screws off the stock plastic housing ruining it which turned my RR into a front wheel drive rig. The stock locker will fit in the HR twin hammers carrier with a little effort. |
Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Looks like you’ve got a good start , id still replace the stock diff screws with protek screws the HR ones supplied with alu diff aren’t great and don’t use the tiny “anti-back out” shims , And also if your keeping the front diff unlocked you definitely want to upgrade the diff washers for the X-ray ones 10x better than stock https://uploads.tapatalk-cdn.com/201...6ee93e0bf5.jpghttps://uploads.tapatalk-cdn.com/201...7be093cec6.jpg and a decent bearings kit is a must too ! Sent from my iPhone using Tapatalk |
Re: Lets do this! I wish I’d known they were definitely bringing a kit out , Bet it’s a really enjoyable build too What are you going to use it for Bigblokboi ? Sent from my iPhone using Tapatalk |
Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! First part of the build, I dyed the chassis a dark orangehttps://uploads.tapatalk-cdn.com/201...751bc2704c.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Have you got a castle field link bigblokboi? I found this very helpful when out [emoji106] Sent from my iPhone using Tapatalk |
Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Finally starting the build. the front diff. Everything is nicely labeled https://uploads.tapatalk-cdn.com/201...248f281746.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! SSD font bulkhead built!https://uploads.tapatalk-cdn.com/201...0b0d303729.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! I found when making the install with the ssd bulkhead the plastic piece which ties into the front didn’t marry up the stock bulkhead seemed to of had rounded corners and the ssd doesn’t so some adjustments with a sharp blade was needed for a nice fit , looks like it’s coming along nicely though [emoji106] Sent from my iPhone using Tapatalk |
Re: Lets do this! Just finished the front axles with Hot Racing knuckles. It went together very smoothhttps://uploads.tapatalk-cdn.com/201...b699d4bcb4.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Front end needed a lil massaging but the suspension is smooth nowhttps://uploads.tapatalk-cdn.com/201...3e976c7ed5.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! That toe block should be in the back, the front bumper holds front hinge pins. |
Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! SSD Third member is set. Had to use different thickness pinion shims to get the thrust correcthttps://uploads.tapatalk-cdn.com/201...1bcd988c07.jpg Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: Lets do this! Derrr, lol. My bad. :lmao: |
| All times are GMT -6. The time now is 04:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com