11-28-2017, 04:33 PM | #1 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Lets do this!
I got the basic upgrades! Sent from my SAMSUNG-SM-G920A using Tapatalk |
Sponsored Links | |
11-28-2017, 09:30 PM | #2 | |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! Quote:
Team DPC!!! | |
11-29-2017, 06:47 AM | #3 |
Newbie Join Date: Oct 2017 Location: Birmingham
Posts: 4
| Re: Lets do this! Looks like the start of a good build. I’d recommend getting the HR aluminum diff carrier for the rear. I sheared the screws off the stock plastic housing ruining it which turned my RR into a front wheel drive rig. The stock locker will fit in the HR twin hammers carrier with a little effort. |
11-29-2017, 07:02 AM | #4 | |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk | |
11-29-2017, 07:25 AM | #5 |
Quarry Creeper Join Date: Dec 2010 Location: Pontypool, wales
Posts: 364
| Re: Lets do this!
Looks like you’ve got a good start , id still replace the stock diff screws with protek screws the HR ones supplied with alu diff aren’t great and don’t use the tiny “anti-back out” shims , And also if your keeping the front diff unlocked you definitely want to upgrade the diff washers for the X-ray ones 10x better than stock and a decent bearings kit is a must too ! Sent from my iPhone using Tapatalk |
11-29-2017, 07:28 AM | #6 |
Quarry Creeper Join Date: Dec 2010 Location: Pontypool, wales
Posts: 364
| Re: Lets do this!
I wish I’d known they were definitely bringing a kit out , Bet it’s a really enjoyable build too What are you going to use it for Bigblokboi ? Sent from my iPhone using Tapatalk |
11-29-2017, 06:43 PM | #7 | |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk | |
12-04-2017, 05:48 PM | #8 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
First part of the build, I dyed the chassis a dark orange Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-04-2017, 07:05 PM | #9 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! |
12-05-2017, 01:34 AM | #10 |
Quarry Creeper Join Date: Dec 2010 Location: Pontypool, wales
Posts: 364
| Re: Lets do this!
Have you got a castle field link bigblokboi? I found this very helpful when out Sent from my iPhone using Tapatalk |
12-05-2017, 02:26 AM | #11 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! |
12-05-2017, 10:41 AM | #12 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
Finally starting the build. the front diff. Everything is nicely labeled Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-05-2017, 12:17 PM | #13 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
SSD font bulkhead built! Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-05-2017, 12:22 PM | #14 |
Quarry Creeper Join Date: Dec 2010 Location: Pontypool, wales
Posts: 364
| Re: Lets do this!
I found when making the install with the ssd bulkhead the plastic piece which ties into the front didn’t marry up the stock bulkhead seemed to of had rounded corners and the ssd doesn’t so some adjustments with a sharp blade was needed for a nice fit , looks like it’s coming along nicely though Sent from my iPhone using Tapatalk |
12-05-2017, 12:36 PM | #15 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
Just finished the front axles with Hot Racing knuckles. It went together very smooth Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-05-2017, 01:39 PM | #16 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
Front end needed a lil massaging but the suspension is smooth now Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-05-2017, 01:48 PM | #17 |
I wanna be Dave Join Date: Apr 2015 Location: Roseville, Ca
Posts: 2,506
| Re: Lets do this!
That toe block should be in the back, the front bumper holds front hinge pins.
|
12-05-2017, 03:03 PM | #18 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this! |
12-05-2017, 03:08 PM | #19 |
Quarry Creeper Join Date: Nov 2014 Location: Reno
Posts: 236
| Re: Lets do this!
SSD Third member is set. Had to use different thickness pinion shims to get the thrust correct Sent from my SAMSUNG-SM-G920A using Tapatalk |
12-05-2017, 03:11 PM | #20 |
I wanna be Dave Join Date: Apr 2015 Location: Roseville, Ca
Posts: 2,506
| Re: Lets do this!
Derrr, lol. My bad. |
Lets do this! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lets try it again | SANTAVY1 | Axial SCX-10 | 1 | 03-04-2014 08:54 PM |
lets all do something | rc crawler boy | Maryland | 43 | 08-13-2013 10:00 PM |
lets just say... | thegodofclod | Chit Chat | 5 | 06-20-2009 04:35 AM |
lets see your 1:1 | punkafi888 | Chit Chat | 1 | 11-13-2008 03:05 PM |
Thread Tools | |
Display Modes | |
| |