Eletronics

[Rathar3]

I bought a kit now waiting on parts. I got a savox 1230 monster torque servo going to run at 6.0 with a external bec and the alum servo horn from losi. at 6.0 volt says 500 oz at .16 speed

Motor is a hobbywing ezrun max 10 SCT 120 amp motor is a 3200kv 550 size 3660SL sensorless

With a CC bec 10 amp basic one. Ordered the 3rd member and thats about it

Radio is a futaba 3pv

This is what i ordered to put in asking here if its all ok or what i need to change. Going to run 2cell lipos to start then worry about going 3cell later

Comments are more than welcome

[raul shabinguez]

During your build, replace all the diff screws with 2.5mm screws. You will have to drill the holes a little bigger in the hardened diff ring gear. The stock 2.0mm stock screws are a weak point your power system will break.
Traxxas 2523 counter sunk 2.5mm screws.

Your electronic choices should be fine.

[Rathar3]

Thanks raul shabinguez for the info I have not started to biuld the kit yet
will ihave to retap the diff housing also?

[raul shabinguez]

Originally Posted by Rathar3

Thanks raul shabinguez for the info I have not started to biuld the kit yet
will ihave to retap the diff housing also?

I did not retap the housing and mine has been fine.

[Rathar3]

Got all the stuff but the screws to start this kit. that ESC is huge WOW. As soon as the screws get here i will start. thanks for the help.