What are you working on??

[Kaler]

I put the ssd beadlocks on the ford, and finally had some time to test the cut 2.2 swampers. The cut really wakes these tires up!!

[Jeff True]

Originally Posted by Kaler

I put the ssd beadlocks on the ford, and finally had some time to test the cut 2.2 swampers. The cut really wakes these tires up!!

Just wait till you underdrive your wraith, that will also wake it up! Tires look great btw!

[Full Throttle Rob]

Those beadlocks look awesome on the Ford!

[Androtaz]

Looking good Kaler! Tried out the Bronco on 3s today. Think 2s is just fine lol Cant wait to get a chance to get out and crawl!

[robertjpjr]

Been messing around with the idea for my plow truck for a while, came up with this as my prototype. I really need to get a band saw or even a cheap jigsaw! Better yet, a 3d printer!!






http://youtu.be/oEuc6yPEUuk

[Kaler]

Very awesome!! Just in tine for all the snow tomorrow.

[Jeff True]

Originally Posted by robertjpjr

Been messing around with the idea for my plow truck for a while, came up with this as my prototype. I really need to get a band saw or even a cheap jigsaw! Better yet, a 3d printer!!






http://youtu.be/oEuc6yPEUuk

Robert that is awesome, came out amazing!!! Very impressive my friend!!!!

[robertjpjr]

Originally Posted by Jeff True

Robert that is awesome, came out amazing!!! Very impressive my friend!!!!

Thanks bud, I hope it works out in the snow, as it did on the bench. I need to make a few adjustments for sure. The servo horn hits the bumper as of the moment. I'll probably make a new "Plate", so I can turn the servo vertical instead of its current horizontal position.
It'd be nice I'f I could make this out of a thicker plastic instead of the wood. Working with what I have.

[Jeff True]

Originally Posted by robertjpjr

Thanks bud, I hope it works out in the snow, as it did on the bench. I need to make a few adjustments for sure. The servo horn hits the bumper as of the moment. I'll probably make a new "Plate", so I can turn the servo vertical instead of its current horizontal position.
It'd be nice I'f I could make this out of a thicker plastic instead of the wood. Working with what I have.

Hey for your first stab at it i would say you did damn good!! Now you know the logistics of what you want so it's just a matter of perfecting it now!!

[Full Throttle Rob]

That's definitely awesome Robert!
If you need some practice with it, my driveway needs to be plowed!
LOL

[Thunder 3000]

Wort to upgrade my wraith shocks ideas?

[Thunder 3000]

Kings or G-made? and thinking about 110mm? for rock crowling.

[Jeff True]

Originally Posted by Thunder 3000

Kings or G-made? and thinking about 110mm? for rock crowling.

Me personally i would go with gmade

[Thunder 3000]

Witch ones?

[Kaler]

Originally Posted by Thunder 3000

Kings or G-made? and thinking about 110mm? for rock crowling.

I run king 100mm on a couple of my scx10s. They are an awesome shock! You can also get spring packs for them with 4 different spring rates.

[Androtaz]

I run 80mm gmade zero's on my wraith. they don't have a lot of give to them. Im running 100mm old style King shocks on my scx 73 Bronco. those work really well.

[Kaler]

Was so impressed with the underdrive in the ford I got a set for my wraith, will be installing them today. Also finally pulled the trigger on a set of locked up rc rock cutter 1.9 wheels, should be here Monday. I ordered all the scale hex bolts and acorn nuts to go with them, should be a good looking wheel.

[Androtaz]

Just when I decide not to use the 2 speed trans and transfer case. I find that you can rotate the motor plate. Game on! Looks good mocked up. Now to get motor mounts made. Got some MIP's for it and all my paint finally got here. Hoping the 13.5t redline on 3s isn't too much for it. Cant wait to find out!
Had to throw together a Pede. too much snow for the wraith. Modded some mud thrashers onto slash wheels with a sensored 8.5 turn on 2s. Geared real low.

[Kaler]

Very cool setup androtaz!! That transfer case is totally awesome! Interesting paint colors, cant wait to see the paint job on that one.

[Kaler]

Got my new wheels today. The scale hubs should be here tomorrow. Locked up makes really nice wheels, very impressed with them!!