RCCrawler Forums

Haulingram82 · 02-04-2016, 07:04 AM

Quote:

Originally Posted by Thunder 3000

Going to try a different motor tonight I have a tekin 17.5 Red line. I looked it up its 2500 KV and sensored so it should work for crawling.

That's what I run in the crawling slash which works good even given the limited gear ratios available for a slash.

Sent from my iPhone using Tapatalk

Androtaz · 02-04-2016, 03:09 PM

ran a few of those. gear low and you should avoid any heat issues. That's what I was running in the ford and the wraith at one time. I may toss it in the ascender before sunday. the trackstar has the groaning thing going under load. drives me nuts.

Quote:

Originally Posted by Thunder 3000

Going to try a different motor tonight I have a tekin 17.5 Red line. I looked it up its 2500 KV and sensored so it should work for crawling.

Kaler · 02-05-2016, 07:17 PM

Thanks to rc4wd coming out with a blazer body I now have the chevy emblem I've been looking for. I don't need the k5 blazer ones so if one of you guys want them you can have them.

Capwn · 02-07-2016, 08:05 PM

Reworking my Rubicon into a Comanche

Androtaz · 02-10-2016, 11:30 PM

Yup tax time rules. Just bought a new ascender kit, wheels tires foams esc motor servo radio....Don't remember ever having one that was all new everything. Don't tell my wife lol

Levesque87 · 02-11-2016, 04:30 AM

I made a deal with my wife, you can have my tax return as long as you dont complain when I buy Rc stuff the rest of the year.

My ascender kit shows up tomorrow.

Kaler · 02-11-2016, 03:32 PM

Ordered some 1.9 proline bfg kr2's and a bunch of scale wheel hardware from locked up. Gonna see if I can dress up some axial wheels with it.

Androtaz · 02-11-2016, 04:49 PM

Just finished up the last of the parts for the new ascender. Dinky rc full interior kit. Im done buying......for now lol

Kaler · 02-11-2016, 05:10 PM

Quote:

Originally Posted by Androtaz

Just finished up the last of the parts for the new ascender. Dinky rc full interior kit. Im done buying......for now lol

What one did you get? Blazer or bronco?

Androtaz · 02-11-2016, 06:34 PM

Blazer. Yup ...im going to build a (holding back vomit) CHEVY

Quote:

Originally Posted by Kaler

What one did you get? Blazer or bronco?

Full Throttle Rob · 02-11-2016, 06:41 PM

Quote:

Originally Posted by Androtaz

Blazer. Yup ...im going to build a (holding back vomit) CHEVY

Blasphemy!!!!!
I think you must be ill......
I figured sure as hell you were gonna say Bronco...

The saving grace is that you can always scrap the "C" word lid and put on a real body!

Sorry, couldn't resist teasing you!

Kaler · 02-11-2016, 06:46 PM

Quote:

Originally Posted by Androtaz

Blazer. Yup ...im going to build a (holding back vomit) CHEVY

Hahaha i'm shocked!! I thought you would be all over the bronco.

Androtaz · 02-11-2016, 11:28 PM

Quote:

Originally Posted by Kaler

Hahaha i'm shocked!! I thought you would be all over the bronco.

If it had been a 80's bronco ide been all over it. I already have a k5 body form the first ascender, with the flat iron xl's it look kinda bad a$$. So I have another set of flat irons.These wheels are coming.

Its going to be all silver. I have warn hubs and mickey Thompson rear hubs coming. MMP and Tekin Redline 17.5, Light kit, Dinky rc interior, and ci foams coming as well.
The wait is killing me...then on top of it I have to put the whole thing together.
No worries Rob lol. now I have 1 Chevy 1 dodge and 3 Fords.

Full Throttle Rob · 02-12-2016, 05:00 AM

That's gonna be sweet!!!
In school all of my friends were staunch Chevy guys and I was the lone Ford fan, so I just can't resist making fun of Chevys.
Truthfully, they are all man made.... therefore they are all junk, no matter what name brand they are!!!

Androtaz · 02-12-2016, 11:13 AM

Oh yah all the big bad, daddy bought my truck guys. Drove chevys. Ive always been a mopar man. But i hold the ford close too. because im old enough that Bigfoot will always be king of the monster trucks. And all these companies that make lids. Deprive me of the 70s dodge body i would kill to have.

skybolt · 02-12-2016, 12:53 PM

Finishing up the Honch axles: SSD tubes, SSD C's, SSD knuckles, STRC uni's, SSD wheels and SSD steering linkages. The knuckles allow ALOT more steering angle, SSD is releasing uni's that allow up to 50 degrees of steering, had I know that I would have waited and tried those! Two minor set backs though, the wheels rub the knuckles (remedied with the dremel, but shouldn't have had to....) after I did one side I found if you use a wraith hex there's enough clearance....ARGH!
And second my faithful OLD Milwaukee 2.4v driver was laid to rest, this ole guy has built many air planes and numerous trucks :(

Sent from my Jitterbug

Androtaz · 02-12-2016, 04:05 PM

Sorry for you're loss. That looks nice. Like those wheels

Full Throttle Rob · 02-12-2016, 05:10 PM

That's a sweet bunch of parts!
Jealous!!!

Kaler · 02-12-2016, 07:01 PM

Got the bfg kr2's today. They look and feel awesome!! A little smaller than the swampers but you really can't tell. Still waiting on the scale hardware to finish them off. Now i'm itching to get them out on some rock!!

Thunder 3000 · 02-13-2016, 08:08 AM

what do you guys think about I fist attempt at some scale detail paint work?

Sent from my iPhone using Tapatalk

02-05-2016, 07:17 PM	#843
Kaler Pebble Pounder Join Date: Nov 2013 Location: Bath,ME Posts: 159	Re: What are you working on?? Thanks to rc4wd coming out with a blazer body I now have the chevy emblem I've been looking for. I don't need the k5 blazer ones so if one of you guys want them you can have them. Attached Images

02-07-2016, 08:05 PM	#844
Capwn I joined the Band! Join Date: Feb 2015 Location: On a rock Posts: 331	Re: What are you working on?? Reworking my Rubicon into a Comanche

02-10-2016, 11:30 PM	#845
Androtaz Pebble Pounder Join Date: May 2013 Location: Nobleboro Posts: 158	Re: What are you working on?? Yup tax time rules. Just bought a new ascender kit, wheels tires foams esc motor servo radio....Don't remember ever having one that was all new everything. Don't tell my wife lol Last edited by Androtaz; 02-10-2016 at 11:32 PM.

02-11-2016, 04:30 AM	#846
Levesque87 Quarry Creeper Join Date: Nov 2011 Location: In the woods Posts: 283	Re: What are you working on?? I made a deal with my wife, you can have my tax return as long as you dont complain when I buy Rc stuff the rest of the year. My ascender kit shows up tomorrow.

02-11-2016, 03:32 PM	#847
Kaler Pebble Pounder Join Date: Nov 2013 Location: Bath,ME Posts: 159	Re: What are you working on?? Ordered some 1.9 proline bfg kr2's and a bunch of scale wheel hardware from locked up. Gonna see if I can dress up some axial wheels with it. Attached Images

02-11-2016, 04:49 PM	#848
Androtaz Pebble Pounder Join Date: May 2013 Location: Nobleboro Posts: 158	Re: What are you working on?? Just finished up the last of the parts for the new ascender. Dinky rc full interior kit. Im done buying......for now lol

02-12-2016, 05:00 AM	#854
Full Throttle Rob Pebble Pounder Join Date: Jul 2014 Location: Phippsburg, ME Posts: 143	Re: What are you working on?? That's gonna be sweet!!! In school all of my friends were staunch Chevy guys and I was the lone Ford fan, so I just can't resist making fun of Chevys. Truthfully, they are all man made.... therefore they are all junk, no matter what name brand they are!!!

02-12-2016, 11:13 AM	#855
Androtaz Pebble Pounder Join Date: May 2013 Location: Nobleboro Posts: 158	Re: What are you working on?? Oh yah all the big bad, daddy bought my truck guys. Drove chevys. Ive always been a mopar man. But i hold the ford close too. because im old enough that Bigfoot will always be king of the monster trucks. And all these companies that make lids. Deprive me of the 70s dodge body i would kill to have.

02-12-2016, 12:53 PM	#856
skybolt Quarry Creeper Join Date: Oct 2011 Location: Westport Island Posts: 404	Re: What are you working on?? Finishing up the Honch axles: SSD tubes, SSD C's, SSD knuckles, STRC uni's, SSD wheels and SSD steering linkages. The knuckles allow ALOT more steering angle, SSD is releasing uni's that allow up to 50 degrees of steering, had I know that I would have waited and tried those! Two minor set backs though, the wheels rub the knuckles (remedied with the dremel, but shouldn't have had to....) after I did one side I found if you use a wraith hex there's enough clearance....ARGH! And second my faithful OLD Milwaukee 2.4v driver was laid to rest, this ole guy has built many air planes and numerous trucks :( Sent from my Jitterbug

02-12-2016, 04:05 PM	#857
Androtaz Pebble Pounder Join Date: May 2013 Location: Nobleboro Posts: 158	Re: What are you working on?? Sorry for you're loss. That looks nice. Like those wheels

02-12-2016, 05:10 PM	#858
Full Throttle Rob Pebble Pounder Join Date: Jul 2014 Location: Phippsburg, ME Posts: 143	Re: What are you working on?? That's a sweet bunch of parts! Jealous!!!

02-12-2016, 07:01 PM	#859
Kaler Pebble Pounder Join Date: Nov 2013 Location: Bath,ME Posts: 159	Re: What are you working on?? Got the bfg kr2's today. They look and feel awesome!! A little smaller than the swampers but you really can't tell. Still waiting on the scale hardware to finish them off. Now i'm itching to get them out on some rock!! Attached Images

02-13-2016, 08:08 AM	#860
Thunder 3000 Newbie Join Date: Sep 2014 Location: So. Po Posts: 0	Re: What are you working on?? what do you guys think about I fist attempt at some scale detail paint work? Sent from my iPhone using Tapatalk

What are you working on?? - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Working out	ozyint	Chit Chat	6	08-02-2011 02:34 PM
Something new I am working on	sparky0068	1.9 Scale Rigs	24	08-16-2008 10:14 PM
Little Something We Was Working On	pureadrenalin	Chit Chat	33	10-22-2007 11:03 AM
Im Working On A Working Wrecker Any Ideas?	LEDDPIPE	General Scale Talk	7	12-13-2006 11:53 PM
What I've been working on......	CSR	Tamiya Txt-1 and Juggernaut	26	11-10-2005 04:54 PM

Sponsored Links

RCCrawler Forums

Thread: What are you working on??