Go Back   RCCrawler Forums > Regional > Northeast > Maine
Loading

Notices

Thread: Rob's 3D Printing Nerdery 2.0

Reply
 
LinkBack Thread Tools Display Modes
Old 11-17-2017, 05:32 AM   #41
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by robertjpjr View Post
Got everything installed and working. Might need a better servo for turning the plow. I did have to disable low / high gear servo because I was using all 6 ports. I may get an 8ch rx.

DERP in looking at the pictures, I see that the winch is on the servo horn. Must have slipped off while I was carrying the truck. It hooks to the plow.







Short video

https://1drv.ms/v/s!Ap69_oAJ8pjhjWjMqXCwtcKziNbs
I sent u private msg...

Sent from my SM-G955W using Tapatalk
yasikb is offline   Reply With Quote
Sponsored Links
Old 11-17-2017, 04:34 PM   #42
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

A redesign for Yasikb



robertjpjr is offline   Reply With Quote
Old 11-17-2017, 11:58 PM   #43
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Small adjustment
Printed a longer mount that connects the plow to the piece that holds the servo.
This allows for a more even link placement.
At center the links are perpendicular to the servo horn. Which is ideal. A nice square.

robertjpjr is offline   Reply With Quote
Old 11-18-2017, 03:18 AM   #44
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by robertjpjr View Post
Small adjustment
Printed a longer mount that connects the plow to the piece that holds the servo.
This allows for a more even link placement.
At center the links are perpendicular to the servo horn. Which is ideal. A nice square.

Ok, I assume u updated the link?

Sent from my SM-G955W using Tapatalk
yasikb is offline   Reply With Quote
Old 11-21-2017, 02:17 PM   #45
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Adapted the bumper I made to fit the Axial type bumper mount. Circle instead of Traxxas square.


robertjpjr is offline   Reply With Quote
Old 11-21-2017, 11:49 PM   #46
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by robertjpjr View Post
Adapted the bumper I made to fit the Axial type bumper mount. Circle instead of Traxxas square.


Hey I have a stupid question what is the bolt in the middle of your servo winch mount?

Sent from my SM-G955W using Tapatalk
yasikb is offline   Reply With Quote
Old 11-22-2017, 06:31 AM   #47
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

It's tough to see in the pics, but its a screw holding a rod end. To center the line on the spool. So it winds correctly.
robertjpjr is offline   Reply With Quote
Old 11-22-2017, 11:10 AM   #48
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by robertjpjr View Post
It's tough to see in the pics, but its a screw holding a rod end. To center the line on the spool. So it winds correctly.
That's what I thought, can u take a better picture of it, if u don't mind? Trying to solve the same issue.....

Sent from my SM-G955W using Tapatalk
yasikb is offline   Reply With Quote
Old 11-22-2017, 11:57 AM   #49
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

robertjpjr is offline   Reply With Quote
Old 11-22-2017, 12:15 PM   #50
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by robertjpjr View Post
Thank u looks Good, but a bit dark to see...

Sent from my SM-G955W using Tapatalk
yasikb is offline   Reply With Quote
Old 11-28-2017, 10:40 AM   #51
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

A few days ago a got a new servo to replace the Solar D772 weak servo for the plow rotation.
$17 for a 275 oz/in servo. All metal gears, works great so far!
robertjpjr is offline   Reply With Quote
Old 11-28-2017, 01:20 PM   #52
Quarry Creeper
 
Join Date: Oct 2011
Location: Westport Island
Posts: 404
Default Re: Rob's 3D Printing Nerdery 2.0

Where'd you find that little guy?
skybolt is offline   Reply With Quote
Old 11-28-2017, 01:23 PM   #53
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Quote:
Originally Posted by skybolt View Post
Where'd you find that little guy?
**Pardon me, $15.95**

https://www.ebay.com/itm/High-Torque...72.m2749.l2649


I do most of my servo buying by kg rating. Rather than site specific.
robertjpjr is offline   Reply With Quote
Old 11-28-2017, 01:26 PM   #54
Quarry Creeper
 
Join Date: Oct 2011
Location: Westport Island
Posts: 404
Default Re: Rob's 3D Printing Nerdery 2.0

That would make a nice candidate for the TF2


Sent from my iPhone using Tapatalk
skybolt is offline   Reply With Quote
Old 11-28-2017, 01:31 PM   #55
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

This is a better servo, if price is flexible. I have this in the 6x6 as the steering servo.
Still under $50 and you get a bad@ss servo with 400 oz/in


https://hobbyking.com/en_us/goteck-h...14sec-77g.html
robertjpjr is offline   Reply With Quote
Old 12-05-2017, 07:37 PM   #56
Newbie
 
Join Date: Dec 2016
Location: Toronto
Posts: 10
Default Re: Rob's 3D Printing Nerdery 2.0

Just wanted to say thank you

Sent from my SM-G955W using Tapatalk

Last edited by THX_138; 12-11-2017 at 06:06 PM.
yasikb is offline   Reply With Quote
Old 12-09-2017, 10:32 PM   #57
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Designed a rear bumper, rock sliders, and a servo winch mount.

Rear Bumper


Rock Sliders


Servo Winch Mount
robertjpjr is offline   Reply With Quote
Old 12-09-2017, 10:36 PM   #58
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Also in other news... the plow parts that I printed seem to be holding up wonderfully.
I was bashing around in the snow, driving fast while plowing and hitting snow banks. Trying to stress the parts.
All seems well, for now.


*For those who are only sub'd to this thread*

Short video of the TRX4 plowing. The radio started beeping due to low voltage.
So turn off your audio after 1 min ! You've been warned

https://1drv.ms/v/s!Ap69_oAJ8pjhjiQxxcjpbvoxnavN

*Added a photo*

robertjpjr is offline   Reply With Quote
Old 12-10-2017, 06:08 PM   #59
Pebble Pounder
 
Join Date: Nov 2013
Location: Bath,ME
Posts: 159
Default Re: Rob's 3D Printing Nerdery 2.0

Hey Robert, wanna print me up a set of 4 jack stands?
Kaler is offline   Reply With Quote
Old 12-10-2017, 06:12 PM   #60
Rock Crawler
 
Join Date: Oct 2013
Location: Wiscasset, ME
Posts: 623
Default Re: Rob's 3D Printing Nerdery 2.0

Sure I have 4 in Grey. You can paint them to your liking. I can bring them to the next run or we can meet up.
robertjpjr is offline   Reply With Quote
Reply



Rob's 3D Printing Nerdery 2.0 - Similar Threads
Thread Thread Starter Forum Replies Last Post
G-Rob's Bronco grob23 1.5 Scale Rigs 24 09-13-2012 04:16 PM
Rob's SCX-10 Rob Cote Axial SCX-10 97 11-28-2011 07:28 PM
G-Rob's Axial grob23 Axial AX-10 Scorpion 20 06-18-2010 05:25 PM
G-Rob's ShaftD grob23 Tamiya TLT Crawlers 16 11-05-2009 02:48 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com