Rob's 3D Printing Nerdery 2.0
 

Due to the Photobucket fiasco I figured a new thread would be easier than sorting through the old one and matching photos to the topic.
So here's a batch upload of photos.

https://wvkopw-ch3301.files.1drv.com...&cropmode=none

https://wvlzmg-ch3301.files.1drv.com...&cropmode=none

https://wvjrdw-ch3301.files.1drv.com...&cropmode=none

https://9zuusg-ch3301.files.1drv.com...&cropmode=none

https://9zunaw-ch3301.files.1drv.com...&cropmode=none

https://yjmd6w-ch3301.files.1drv.com...&cropmode=none

https://yjnt1a-ch3301.files.1drv.com...&cropmode=none

https://yw7nsq-ch3301.files.1drv.com...&cropmode=none

https://yw57dw-ch3301.files.1drv.com...&cropmode=none

https://hcip1w-ch3301.files.1drv.com...&cropmode=none

https://hcl6na-ch3301.files.1drv.com...&cropmode=none

https://hck9ba-ch3301.files.1drv.com...&cropmode=none

https://6a2bna-ch3301.files.1drv.com...&cropmode=none

https://6a0cqq-ch3301.files.1drv.com...&cropmode=none

https://yw7gag-ch3301.files.1drv.com...&cropmode=none

https://yw4prw-ch3301.files.1drv.com...&cropmode=none

https://hckvqq-ch3301.files.1drv.com...&cropmode=none

https://hcjmbw-ch3301.files.1drv.com...&cropmode=none

https://hcjfwa-ch3301.files.1drv.com...&cropmode=none

https://gm1pzw-ch3301.files.1drv.com...&cropmode=none

https://gc1pzw-ch3301.files.1drv.com...&cropmode=none

https://gs1pzw-ch3301.files.1drv.com...&cropmode=none

https://gs1pzw-ch3301.files.1drv.com...&cropmode=none

https://g81pzw-ch3301.files.1drv.com...&cropmode=none

https://hm1pzw-ch3301.files.1drv.com...&cropmode=none

https://hc1pzw-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Looking for a 5th wheel for my build. Interested?

Re: Rob's 3D Printing Nerdery 2.0
 

I can make something if I know what dimensions you need.

Re: Rob's 3D Printing Nerdery 2.0
 

Hey man.. did u do any other designs for trx4?

Sent from my SM-G935W8 using Tapatalk

Re: Rob's 3D Printing Nerdery 2.0
 

I haven't yet. Just designed what I needed.
Is there a need for other items?

Re: Rob's 3D Printing Nerdery 2.0
 

I've been printing like crazy the last few days. I go in bursts. Got a new grill/radiator support/light buckets going right now for my JKU body. Having a 3D printer makes this hobby way more awesome.

Re: Rob's 3D Printing Nerdery 2.0
 

Low CG battery tray

Sent from my SM-G935W8 using Tapatalk

Re: Rob's 3D Printing Nerdery 2.0
 

I'll look into it.

Re: Rob's 3D Printing Nerdery 2.0
 

Made a electronics box for the TRX-4. Nothing too fancy. Don't mind the huge mess. Still in progress.

https://gs3owg-ch3301.files.1drv.com...&cropmode=none

https://g83owg-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Hey Rob any luck?

Sent from my SM-G935W8 using Tapatalk

Re: Rob's 3D Printing Nerdery 2.0
 

Not yet, have been busy.

Re: Rob's 3D Printing Nerdery 2.0
 

So I took some time and made a first prototype for the low COG battery tray. I'm sure I forgot something, but I'll print it and see how it fits.

Not sure what to do about the "dead space" at the front. I need the mounting holes, but you don't use the space for the battery. Perhaps it can be a spot to mount an electronic device? BEC perhaps? Thoughts?

Tray will be 150mm Long X 54mm Wide X 38mm High. Should fit most batteries. If does require you move the rear cross brace back. I'll post more on that when the part is printed.

https://gm0era-ch3301.files.1drv.com...&cropmode=none

https://f80era-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Looks very good... I saw someone already designed one and selling it bowhouse, i believe

Sent from my SM-G935W8 using Tapatalk

Re: Rob's 3D Printing Nerdery 2.0
 

Yup, saw that too. When I get home from work, I'll post up more photos. Hopefully it fits correctly with no clearance issues.

Re: Rob's 3D Printing Nerdery 2.0
 

Round 2

https://fm0era-ch3301.files.1drv.com...&cropmode=none

https://fc0era-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Made some tweaks. I still messed up on the velcro slots. I should've measured my straps. I knew better... So I just dremeled them to size. The file will be changed for anyone who wants one of these.

https://f839qa-ch3301.files.1drv.com...&cropmode=none

https://gm39qa-ch3301.files.1drv.com...&cropmode=none

https://gc39qa-ch3301.files.1drv.com...&cropmode=none

https://gs39qa-ch3301.files.1drv.com...&cropmode=none

https://g839qa-ch3301.files.1drv.com...&cropmode=none

https://hm39qa-ch3301.files.1drv.com...&cropmode=none

https://hc39qa-ch3301.files.1drv.com...&cropmode=none

https://fc39qa-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Version 3

https://fm39qa-ch3301.files.1drv.com...&cropmode=none

Re: Rob's 3D Printing Nerdery 2.0
 

Very very nice man...

Sent from my SM-G935W8 using Tapatalk

Re: Rob's 3D Printing Nerdery 2.0
 

"thumbsup""thumbsup"

Re: Rob's 3D Printing Nerdery 2.0
 

-- Keeping things updated --

4Runner light housings / light bar

https://e1jqhw-ch3301.files.1drv.com...&cropmode=none

https://ffjqhw-ch3301.files.1drv.com...&cropmode=none

https://srackw-ch3301.files.1drv.com...&cropmode=none

Got an airsoft rifle to mess around with, with my brother. Printed a flashlight holder and a vertical grip.

https://ulackw-ch3301.files.1drv.com...&cropmode=none