This is the most un capable rig I ever saw. |
|
Yeah, what a piece of junk... :ror: I think when I order a replacement for that axle housing I broke Sunday, it will be Aluminum and the motor will mount on the axle, hint - hint. I had to take that gate because I couldnt get over the ledge on the other side of my beetle. :roll: I need to raise my ground clearance a 1/4 inch. I get hung up on the belly way to much. Its currently at 2.5 inches of clearance. Cronus, I cant see your pic, but if its the carpet covered plywood A frame, its 62 degrees, and no, I didnt make it. :x |
Quote:
Cheater |
hahaha, I already ordered plastic replacement housings, but If this thing lets me down one more time, I swear its going in the trash, and Im ordering some MOA's :ror: |
What are MOA's |
Quote:
|
Quote:
I need to recess my transmission screws. They are fine for natural obstacles, but trying to slide over anything with a straight edge (like a 2x4), it can get hung up. |
Traction was fine, and if I had been able to get all the way to the top (I made it a 1/4 of the way up), I think I could of throttled over the edge. My issue was torque twist. The front right would start to lift, and over she would go. I need a stiffer spring in the left rear. |
oh, so you need DROOP :D |
All times are GMT -6. The time now is 09:46 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com