RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Max Speed Technology CFX (http://www.rccrawler.com/forum/max-speed-technology-cfx/)
-   -   MST CFX Bronco, my take on this rig and fisrt biuld. (http://www.rccrawler.com/forum/max-speed-technology-cfx/598035-mst-cfx-bronco-my-take-rig-fisrt-biuld.html)

Tim3 04-23-2018 11:49 AM

MST CFX Bronco, my take on this rig and fisrt biuld.
 
1 Attachment(s)
I thought the MST CFX chassis would be a good first time build.
So let it begin.

First let me say sorry for such bad pics, I hope to take more time in the future and future builds.

1.
I have already put most of the chassis together so wont boar you with this.
I got in some aluminum shock mounts and tried them out. I didn't like them and gave them to my friend and went back to the stock kit mounts.

I didn't wont you guys to see all the crap on my build table.:roll:

Tim3 04-23-2018 11:51 AM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
2 Attachment(s)
Tire rim combo.

Tim3 04-23-2018 11:53 AM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
1 Attachment(s)
Body ready for test fitting and cutting.

Tim3 04-23-2018 11:57 AM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
1 Attachment(s)
Test mount.

Tim3 04-23-2018 12:03 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
3 Attachment(s)
I got a killer body interior for the build, but it was to wide and the frame was backward to the scale Bronco. So I cut it up and reversed the tube frame. I have to figure out how to build the rear of the frame now and that's where I am at.

JatoTheRipper 04-23-2018 12:29 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Awesome build so far! I love the tire and wheel combination and they go perfect with that Bronco body! "thumbsup"

OSRC 04-23-2018 12:30 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Off to a great start!

Tim3 04-23-2018 11:15 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
4 Attachment(s)
Thanks guys.
I seen these Mini-Mag 5Lug 5Slot Beadlock on GCM vid u-tube and thought they would just fit the bill.

I had a chance to do a little more work. My friend took my aluminum sheet and created a set of right and left floor panels that mount/bolt to the frame rails .

Tim3 04-23-2018 11:23 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
1 Attachment(s)
...

JatoTheRipper 05-17-2018 08:31 AM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
OK this is going to be freaking awesome! I can't wait to see it completed.

Don't worry about the messy workbench, unless you have something illegal on there. :lmao: Mine looks the same and I post photos.

Old n ratty 05-17-2018 02:28 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Diggin' the mag wheels!! Going to look great completed! I've been debating the CFX-w chassis, but something about the shorter CFX makes me want to get another!
Mainly as MST have brought out a Jimny shell for it....

Tim3 10-03-2018 12:46 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
3 Attachment(s)
Thanks Friends !


OK...finally a little up date :roll:

Some work on a steering rod not just off the servo..hmmmm...may or maynot....

JatoTheRipper 10-03-2018 01:20 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Those wheels are perfect!

Big Mike 10-15-2018 05:45 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
it might take less time to clean your bench than it does to alter all these images! :lmao:

Looks good. Digging the tire/wheel combo...

Tim3 12-05-2018 12:24 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Big Mike....NOW THAT IS FUNNY.....LOL. I hate to say it.... my bench is a pigs mess, dang!

Tim3 12-05-2018 01:33 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
5 Attachment(s)
Some work done.

1. The steering rod bushing and plate are finished.

2. Also moved shock towers to leaned back a set of new 80mm rc4wd shocks.

3. Made the steering cross rod or I should say steering cross plate its mounted from the back top of axil.

Tim3 12-05-2018 02:14 PM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
2 Attachment(s)
A overall front view.

Tim3 06-06-2019 07:21 AM

Re: MST CFX Bronco, my take on this rig and fisrt biuld.
 
Thank you to everyone for the likes ! :)

I will get back on this..


All times are GMT -6. The time now is 07:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com