|
| LinkBack | Thread Tools | Display Modes |
04-27-2018, 11:34 AM | #1 |
Pebble Pounder Join Date: Aug 2010 Location: Anderson, SC
Posts: 161
| Good, better, best shocks for CFX/CMX?
I am currently running the stock shocks and my rig is a bit heavy on the front end and I have very little travel. I was thinking about changing the hoops or shocks. Either going to a 80mm shock (but not sure what to go with) or design my own hoop with more mounting positions to raise the front end a little bit. I have the Lexan FJ40 with roof rack and planning on a tire carrier for the rear at some point. Anyone have any thoughts or recommendations? Sent from my iPhone using Tapatalk |
Sponsored Links | |
04-27-2018, 11:40 AM | #2 |
RCC Addict Join Date: Feb 2016 Location: Princeton, North Carolina, USA
Posts: 1,499
| Re: Good, better, best shocks for CFX/CMX?
Had the same problem on my hard JK bodied CFX. Went to 70mm Kings. Work perfectly with plenty of travel and good ride height and look good too.
|
04-27-2018, 11:58 AM | #3 |
Pebble Pounder Join Date: Aug 2010 Location: Anderson, SC
Posts: 161
| Re: Good, better, best shocks for CFX/CMX?
I knew King’s were probably a good option. I’m not a huge fan of the blue anodizing. If they were silver/black/dark gray. Is there a easy way to remove anodizing? Sent from my iPhone using Tapatalk |
04-27-2018, 12:03 PM | #4 |
RCC Addict Join Date: Feb 2016 Location: Princeton, North Carolina, USA
Posts: 1,499
| Re: Good, better, best shocks for CFX/CMX?
I've read that oven cleaner will remove anodizing...haven't tried it personally. removing anodized coating |
04-27-2018, 12:12 PM | #5 |
Rock Stacker Join Date: Jun 2016 Location: England
Posts: 71
| Re: Good, better, best shocks for CFX/CMX?
The new proline shocks look very good and either 70mm or 90mm Sent from my iPhone using Tapatalk |
04-27-2018, 01:48 PM | #6 |
RCC Addict Join Date: Feb 2016 Location: Princeton, North Carolina, USA
Posts: 1,499
| Re: Good, better, best shocks for CFX/CMX? |
04-28-2018, 08:12 AM | #7 |
Pebble Pounder Join Date: Aug 2010 Location: Anderson, SC
Posts: 161
| Good, better, best shocks for CFX/CMX?
I redesigned my CMS to squeeze a few more millimeters of up travel (it’s on the printer). So the pumpkin will have more room to travel now. I am also designing a new shock hoop to give me some mounting options. So if I want to do a droop setup with a longer (80-90mm) shock I can. Sent from my iPhone using Tapatalk Last edited by gsgraber92; 04-28-2018 at 08:15 AM. |
05-24-2018, 09:55 PM | #8 |
Pebble Pounder Join Date: Apr 2005 Location: Australia
Posts: 153
| Re: Good, better, best shocks for CFX/CMX?
is 70mm the stock eye to eye length for the CFX shocks?
|
05-24-2018, 10:53 PM | #9 |
Pebble Pounder Join Date: Aug 2010 Location: Anderson, SC
Posts: 161
| Re: Good, better, best shocks for CFX/CMX?
Yes. Sent from my iPhone using Tapatalk |
06-21-2021, 06:48 AM | #10 |
Quarry Creeper Join Date: Nov 2016 Location: Surrey
Posts: 462
| Re: Good, better, best shocks for CFX/CMX?
Im looking into a wrangler build on the CMX chassis but looking to upgrade the shocks. Was thinking 70 or 80mm pitbulls. Im going with a scale build, Will the chassis run OK with 80mm or best to stick with 70's? |
12-29-2021, 02:35 AM | #11 |
Newbie Join Date: Sep 2021 Location: Finnland
Posts: 8
| Re: Good, better, best shocks for CFX/CMX? |
Good, better, best shocks for CFX/CMX? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MST CFX and CMX being discontinued? | StomperCrawler | Max Speed Technology CFX | 7 | 04-06-2018 06:57 PM |
New some help from cmx or cfx owner | Killa-Cotton | Max Speed Technology CMX | 2 | 09-18-2017 06:25 PM |
Parts compatibility between CMX/CFX/CFX-W | mhowzit | Max Speed Technology CMX | 1 | 05-20-2017 07:19 AM |
| |