RCCrawler Forums

Nicadraus · 10-20-2020, 08:09 PM

New metal bumper.

It's quite hard to find metal bumpers that would fit the Jimny's narrow body. The aftermarket Jimny bumpers are made of plastic and priced high ($60 each). I found this bumper with the proper width that fits the Jimny. But the mounting of course is much different as this is made for SCX10. So I ordered a generic SCX10 aluminum bumper mount. Fits the CFX's chassis with a little modification on chassis' (widen the screw holes to allow the mount to be screwed). Then I also removed the long triangular bull bar installed on the bumper.

Aluminum bumper mount installed.

Removed this triangular bar

Test fit... Perfect!

Nicadraus · 11-02-2020, 03:32 AM

Update:

Installed rear bumper with rear fog lamps.

Bought this KYX rear bumper for 313. It was too wide so I cut the side bars to make it shorter. Then installed rear fog lamps.

Painted the lens of the rear fog lamps to clear red and the reflector housing to bright silver.

Installed

Nicadraus · 11-06-2020, 08:50 AM

Light crawling at my mini trail*front yard...

Love the full lights.

Nicadraus · 11-07-2020, 07:04 AM

Ordered a newer electronic box. Bigger to fit the light switch circuits and it's made of aluminum. Re-arranged the wires too.

Replaced the plastic steering lower link to aluminum too. No more flexing.

Did a some night runs in the street with my friend and my daughter (driving the CC-01)

Nicadraus · 11-08-2020, 06:24 AM

Some better pics...

Nicadraus · 11-11-2020, 03:49 AM

The final pieces to complete the build...

steel center shaft
aluminum center skid plate
stainless skid plate
stainless steel flange balls

All set!

Nicadraus · 11-18-2020, 06:52 AM

Got new 1.9 beadlock wheels and tires for Mr. Jimny. $30 for the wheels and $20 for the tires. I love the finish on this one. Looks like sand-blasted finish.

This beadlock mounting toll works great. Mounting beadlock wheels really takes a lot of time and effort. Usually, 15-20 minutes*to mount per wheel. But with the help of this tool, five*minutes*per wheel only.

Mounted.*Looks great!

This set even comes*with center caps.

Love it!

Nicadraus · 11-29-2020, 09:05 AM

CFX's first outdoor trail at our friend's place. We drove about 130km down south.

I'm very impressed with this little one and keeping up with the 313mm brothers was not a problem at all. I'm glad that aside from looking good,*the upgrades are worth it.

Nicadraus · 02-01-2021, 05:30 AM

Some shots in action at different days and venues.

Nicadraus · 02-01-2021, 05:46 AM

Upgraded the shocks. Been wanting this set of KYX for quite sometime now. It's been in my cart but never purchased it. Until I saw it in another online shop at half the price ($28 for 2 pairs) and bought it right away. Rebuilt them and added oil. Works great! Spring rate and rebound is really nice and smooth.

Nicadraus · 02-10-2021, 08:43 AM

Finally an axle guard!

It is inevitable that the diff housing will get scratches and scrapes. So guard is very important. This is also the last mod pieces of this rig for the under chassis (I think). Now it's ready for this weekend's trailing and crawling.

Nicadraus · 01-10-2022, 09:37 AM

Zukiiholic · 01-10-2022, 06:20 PM

Great looking build on the Lil Jimny

Nicadraus · 01-28-2022, 09:36 AM

Quote:

Originally Posted by Zukiiholic

Great looking build on the Lil Jimny

Thank you!

Nicadraus · 03-18-2022, 11:52 PM

- Installed servo guard skid plate

- aluminum shock tower extension for 90/100mm shocks.

The suspension works like a charm. Very accurate and body roll is great.

Nicadraus · 04-12-2022, 09:04 AM

New body. RGT Jimny JB74. Extended the wheelbase from 242 to 250mm

Nicadraus · 04-27-2022, 05:37 AM

One of the fun parts in building a crawler is accessorizing it. Got a roof rack for an MB G500. It's a little wider for the JB74 roof but looks ok to me. I also put two roof lights instead of the usual 4. I also installed a metal ladder at the back. Then added a few red accents.

B-MOW71 · 04-27-2022, 09:27 AM

Great job on the build!

This is a cool looking little rig! It looks like it would be the perfect platform for a short wheelbase rig. Nice job on the scale accessories!

I've got an old Jeep JK body that's been on my shelf for years. I think this chassis would be perfect for it!

Great thread! Looking forward to seeing more!

Nicadraus · 04-27-2022, 03:25 PM

Thanks Brian!

Yeah this little one is a great class 1 rig. Lots of hop ups available too.

Nicadraus · 05-05-2022, 11:46 AM

Made a short video. Testing out the body roll after installing the steel roof rack and added a few accessories on it. I like how the body moves now on rocky terrain on my makeshift backyard mini trail.

10-20-2020, 08:09 PM	#21
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up New metal bumper. It's quite hard to find metal bumpers that would fit the Jimny's narrow body. The aftermarket Jimny bumpers are made of plastic and priced high ($60 each). I found this bumper with the proper width that fits the Jimny. But the mounting of course is much different as this is made for SCX10. So I ordered a generic SCX10 aluminum bumper mount. Fits the CFX's chassis with a little modification on chassis' (widen the screw holes to allow the mount to be screwed). Then I also removed the long triangular bull bar installed on the bumper. Aluminum bumper mount installed. Removed this triangular bar Test fit... Perfect!

11-02-2020, 03:32 AM	#22
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Update: Installed rear bumper with rear fog lamps. Bought this KYX rear bumper for 313. It was too wide so I cut the side bars to make it shorter. Then installed rear fog lamps. Painted the lens of the rear fog lamps to clear red and the reflector housing to bright silver. Installed

11-06-2020, 08:50 AM	#23
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Light crawling at my mini trail*front yard... Love the full lights.

11-07-2020, 07:04 AM	#24
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Ordered a newer electronic box. Bigger to fit the light switch circuits and it's made of aluminum. Re-arranged the wires too. Replaced the plastic steering lower link to aluminum too. No more flexing. Did a some night runs in the street with my friend and my daughter (driving the CC-01) Last edited by Nicadraus; 11-07-2020 at 07:07 AM.

11-08-2020, 06:24 AM	#25
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Some better pics...

11-11-2020, 03:49 AM	#26
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up The final pieces to complete the build... steel center shaft aluminum center skid plate stainless skid plate stainless steel flange balls All set!

11-18-2020, 06:52 AM	#27
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Got new 1.9 beadlock wheels and tires for Mr. Jimny. $30 for the wheels and $20 for the tires. I love the finish on this one. Looks like sand-blasted finish. This beadlock mounting toll works great. Mounting beadlock wheels really takes a lot of time and effort. Usually, 15-20 minutesto mount per wheel. But with the help of this tool, fiveminutesper wheel only. Mounted.Looks great! This set even comes*with center caps. Love it!

11-29-2020, 09:05 AM	#28
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up CFX's first outdoor trail at our friend's place. We drove about 130km down south. I'm very impressed with this little one and keeping up with the 313mm brothers was not a problem at all. I'm glad that aside from looking good,*the upgrades are worth it.

02-01-2021, 05:30 AM	#29
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Some shots in action at different days and venues.

02-01-2021, 05:46 AM	#30
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Upgraded the shocks. Been wanting this set of KYX for quite sometime now. It's been in my cart but never purchased it. Until I saw it in another online shop at half the price ($28 for 2 pairs) and bought it right away. Rebuilt them and added oil. Works great! Spring rate and rebound is really nice and smooth.

02-10-2021, 08:43 AM	#31
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Finally an axle guard! It is inevitable that the diff housing will get scratches and scrapes. So guard is very important. This is also the last mod pieces of this rig for the under chassis (I think). Now it's ready for this weekend's trailing and crawling.

01-10-2022, 09:37 AM	#32
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up

01-10-2022, 06:20 PM	#33
Zukiiholic Rock Crawler Join Date: Apr 2014 Location: Portland Posts: 835	Re: CFX going hopped up Great looking build on the Lil Jimny

03-18-2022, 11:52 PM	#35
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up - Installed servo guard skid plate - aluminum shock tower extension for 90/100mm shocks. The suspension works like a charm. Very accurate and body roll is great.

04-12-2022, 09:04 AM	#36
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up New body. RGT Jimny JB74. Extended the wheelbase from 242 to 250mm

Sponsored Links

CFX going hopped up - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MST CFX... Out with the old in with the CFX...	Old n ratty	Max Speed Technology CFX	24	01-13-2019 08:57 AM
Parts compatibility between CMX/CFX/CFX-W	mhowzit	Max Speed Technology CMX	1	05-20-2017 07:19 AM
My hopped up rc18t	mp3ranger	Chit Chat	8	03-14-2006 10:06 AM

04-27-2022, 05:37 AM	#37
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up One of the fun parts in building a crawler is accessorizing it. Got a roof rack for an MB G500. It's a little wider for the JB74 roof but looks ok to me. I also put two roof lights instead of the usual 4. I also installed a metal ladder at the back. Then added a few red accents.

04-27-2022, 09:27 AM	#38
B-MOW71 Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio Posts: 4,134	Re: CFX going hopped up Great job on the build! This is a cool looking little rig! It looks like it would be the perfect platform for a short wheelbase rig. Nice job on the scale accessories! I've got an old Jeep JK body that's been on my shelf for years. I think this chassis would be perfect for it! Great thread! Looking forward to seeing more!

04-27-2022, 03:25 PM	#39
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Thanks Brian! Yeah this little one is a great class 1 rig. Lots of hop ups available too.

05-05-2022, 11:46 AM	#40
Nicadraus Pebble Pounder Join Date: Apr 2019 Location: Tatooine Posts: 155	Re: CFX going hopped up Made a short video. Testing out the body roll after installing the steel roof rack and added a few accessories on it. I like how the body moves now on rocky terrain on my makeshift backyard mini trail.

RCCrawler Forums

Thread: CFX going hopped up