Has anyone used the Dinky CMS for the CMX?
 

Hey guys,
Considering a CMX (I think I prefer it over the CFX (lower CG?), please let me know if the CFX is better and why) but noticed it's an axle mount servo. Looking at the Dinky CMS mount does that interfere with the battery tray? Seems to be not much clearance there?

Cheers
Simon

Re: Has anyone used the Dinky CMS for the CMX?
 

I run a few of my CMX's with a CMS setup I got off of Shapeways and there are zero clearance issues.

https://www.shapeways.com/product/VZ...is-servo-mount

Re: Has anyone used the Dinky CMS for the CMX?
 

Just so people know. If you have a printer or know someone with a printer I have it on Thingiverse and it is free to download.


Sent from my iPhone using Tapatalk

Re: Has anyone used the Dinky CMS for the CMX?
 

how does it mount on the axle side?

Has anyone used the Dinky CMS for the CMX?
 

Pan hard bar from the CMS mount to the right hand shock mount on the axle. Use your left hand top link as a pan hard bar. Front will become a three link with pan bar instead of a four link. Adjust it out until the front axle is centered between the frame rails. I can get you an exact link measurement later if you like.


Sent from my iPhone using Tapatalk

Re: Has anyone used the Dinky CMS for the CMX?
 

how is the bump steer on it?

Re: Has anyone used the Dinky CMS for the CMX?
 

There is very little to no bump steer. It’s such a little truck with small amount of travel. Send me a pm with your address and I’ll print you one and you can try it out.


Sent from my iPhone using Tapatalk

Re: Has anyone used the Dinky CMS for the CMX?
 

I'll throw in some more praise for gsgraber92's CMS. I'm running it on my CFX and it works great on my tiny tire Bronco. I'm not comp-ing with it or anything, but for the trailing I do with the rig it's a nice setup.

Re: Has anyone used the Dinky CMS for the CMX?
 

this reminds me..I need to get one of these for my CFX, good to know they work well..

Re: Has anyone used the Dinky CMS for the CMX?
 

i got my guy to print 5 of them... we put them on 2 cfx and 1 cmx for the comp this past weekend. worked very well.

Re: Has anyone used the Dinky CMS for the CMX?
 

Glad to hear it!


Sent from my iPhone using Tapatalk