Just a simple mud truck With all the rain ive been getting in my area i decided i needed a new mud truck. Ever since i saw rcbros burly mud truck conversion i knew it would be my next mud truck project. I haven't decided on a body yet so a honcho will be used for mock up. http://i260.photobucket.com/albums/i...ps4qdlyquc.jpg http://i260.photobucket.com/albums/i...pspdpb2cgy.jpghttp://i260.photobucket.com/albums/i...psjwm6er27.jpg |
Re: Just a simple mud truck What's the one behind it Sent from my SM-N910T |
Re: Just a simple mud truck Quote:
Its a tamiya txt mega truck. I have pics of it in the pic archive. |
Re: Just a simple mud truck Since ive got a thing for jeeps i got the nukizer jeep body. Also some drive shafts and under drive gears. I plan to have this drivable this weekend. Thanks for looking. http://i260.photobucket.com/albums/i...psimd17iw9.jpg http://i260.photobucket.com/albums/i...psdvsi7vmt.jpg |
Re: Just a simple mud truck why not put a sensored 13.5 in it? |
Re: Just a simple mud truck Im reusing the esc and brushless motor from my old mud truck. |
Re: Just a simple mud truck Small update. I picked up a front sway bar meant for a wraith for the rear, seems to work. http://i260.photobucket.com/albums/i...psneccntqj.jpg http://i260.photobucket.com/albums/i...psqes9mcnt.jpg |
Re: Just a simple mud truck Got a new body :mrgreen: Also electronics are in. I decided to go with a Holmes water proof 3300kv system on 3s. All thats left is final mounting of body and esc, smaller spur gear. Thanks for looking. http://i260.photobucket.com/albums/i...pslbqajddi.jpg http://i260.photobucket.com/albums/i...psukqap6mn.jpg http://i260.photobucket.com/albums/i...ps8fepu9bu.jpg |
Re: Just a simple mud truck Looks good |
Re: Just a simple mud truck Thanks man. |
Re: Just a simple mud truck Truck is looking good. how does it do in the mud? got any action shots? I've been thinking about building a mud toy myself. Just having a hard time finding a chassis i like and can afford. |
Re: Just a simple mud truck Havent got in the mud yet, its coming. I went this route for performance and simplicity. I highly recommend a sway bar in the rear and the battery mounted across the frame rails behind the front shock tower. Testing in the front yard with the setup i mentioned allows me to make controllable full throttle take offs with out lifting the front end. Thanks again for looking. |
Re: Just a simple mud truck looks good, is it tamiya ps-23? |
Re: Just a simple mud truck Im not sure. I got the body in a partial trade. |
Re: Just a simple mud truck Quote:
|
Re: Just a simple mud truck Quote:
Sure, ill get some better pics after work. It wasnt to hard to do, just a longer screw. |
Re: Just a simple mud truck Pretty easy just a longer screw. Hope this helps. http://i260.photobucket.com/albums/i...pslkz0a9oc.jpg http://i260.photobucket.com/albums/i...ps5gtr5ii2.jpg |
Re: Just a simple mud truck Quote:
|
Re: Just a simple mud truck Small update kinda. Decided to rebuild the trans, it felt a little crunchy. And im glad i did all but one bearing was pretty far gone. Also i put in a Locked up slipper clutch eliminator because slippers suck. http://i260.photobucket.com/albums/i...pswucyihy4.jpg |
Re: Just a simple mud truck I decided to bring this truck back and completely rebuild it. After killing the motor and ring and pinions, i decided to build new scx10 axles with XR wide beef tubes. Also im changing the body to the tfl racing bronco since i couldnt sell it. For now im in the mock up phase. Im thinking of going with a 13in wb. Thanks for looking. Oh and i got these tire at todays comp and swap, doese any one know anything about these tires? Ive seen them before thanks http://i.imgur.com/RaR29dSl.jpg http://i.imgur.com/rY4vQkcl.jpg http://i.imgur.com/tmBKMyXl.jpg http://i.imgur.com/G6WCf6Gl.jpg |
All times are GMT -6. The time now is 09:13 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com