Rjohns King Sling
 

Ok here we go. Since I can't work on one thing at a time here is the start to a King Sling project I've always wanted to make.

Pitbull 2.2 with RC4WD Mud Bashers
SMT10 chassis dyed black (since finding a black one is like finding a unicorn)
Supershafty Bombproof Wraith transmission (all I have at the moment. May switch to an SCX10)
Custom King Sling body and paint.
JEC trailing arms and rear sway bar (going to try rear only at first)

https://uploads.tapatalk-cdn.com/201...a9aa4ccd04.jpg

https://uploads.tapatalk-cdn.com/201...4626af6c52.jpg

https://uploads.tapatalk-cdn.com/201...738bbb7fe7.jpg

That's all I have at the moment. Not sure on axles or electronics. I'll probably us some SSD diamond AR60 with a PP3500XL and a MMP with a Holmes SVH500.

Re: Rjohns King Sling
 

Moving along. That servo is not staying. Dropping in a Savox 1210SG. Not sure if and how the body is going to fit this chassis though. It's out at paint and the way it comes it up front may be an issue but I'll worry about that later.

https://uploads.tapatalk-cdn.com/201...26ee7ff649.jpg

https://uploads.tapatalk-cdn.com/201...b196c4d89b.jpg

https://uploads.tapatalk-cdn.com/201...03217b1486.jpg

Rjohns King Sling
 

Thanks! I had the 120mm Kings laying around. I've been tossing them back and forth for about a year and needed something to put them in. I'm using Wraith length TA's and front links but I think the wheelbase should be pretty good. If it's short I'll stick some longer rod ends on the front and switch over to Yeti TA's. I'm probably going to use the Vangaurd AE-3 and 3150 since it's waterproof and just sitting here as well.

Re: Rjohns King Sling
 

Well I got 2 Losi Rock Rey's... Found a company that makes custom aftermarket parts I think it was from you that I got the name of the company

Sent from my XT1650 using Tapatalk

Rjohns King Sling
 

Yes sir. JEC! Jay is an awesome guy to work with. Well worth the wait. I. I buy a lot of stuff from him and his sway bars are bad ass! No more stripped set screws. Let him know I sent ya!

Re: Rjohns King Sling
 

Don't forget to change out your diff washers!

Re: Rjohns King Sling
 

What do you suggest you any part numbers

Sent from my XT1650 using Tapatalk

Re: Rjohns King Sling
 

Xray 964050

Re: Rjohns King Sling
 

Does RPP carry that

Sent from my XT1650 using Tapatalk

Re: Rjohns King Sling
 

Doubt it. Got mine on ebay

Rjohns King Sling
 

So I'm thinking I have to narrow up the front of the chassis. If I can't get that to work then I'll do a custom chassis and base it off the real one.

Re: Rjohns King Sling
 

This thing already looks bad ass! I can't wait to see the finished product.

Who is going to do the body paint or wrap for you?

Re: Rjohns King Sling
 

Bam!
https://uploads.tapatalk-cdn.com/201...505a7fd8cf.jpg

https://uploads.tapatalk-cdn.com/201...2e8a253739.jpg

https://uploads.tapatalk-cdn.com/201...6051877b21.jpg

Re: Rjohns King Sling
 

Looks sooo cool! "thumbsup", where'd you find the body?

Re: Rjohns King Sling
 

There are a few of them floating around. Some guy on Facebook says he has 3, not sure about that but I grabbed this on off the forums.