Tough solid axles? Hello, I want to turn my TrX4 into an MT and have the very heavy all aluminum MT wheels. Everyone says I will break my current axles and AR60s because the wheels are so heavy. Can anyone suggest what to use for axles. I am almost considering getting a Mad Crusher and buying the RC4WD adapters for my wheels. I have doubts the TRX4 will hold up to the added weight. |
Re: Tough solid axles? |
Re: Tough solid axles? Use plastic wheels. |
Re: Tough solid axles? Quote:
Sent from my LM-G710VM using Tapatalk |
Re: Tough solid axles? I just bought a set of the PL brawler wheels n PL destroyer tires. For a complete set its lil over $140 shipped. Or you could buy them seperate n may get them a tad cheaper Sent from my SM-J327VPP using Tapatalk |
Re: Tough solid axles? Twin force axles |
Re: Tough solid axles? I'd really consider not using metal wheels. You'll increase the weight considerably which means potentially bent axles on bad landings and add considerable drive line strain. |
Re: Tough solid axles? I will just use them for the pulling sled only with no jumping. The weight will help keep the truck planted. |
Re: Tough solid axles? I wsnt to revisit this post and get opinions on what anyone thinks is the best scale truck axle. I have a SCX10.2 and a TRX4. I want to make an MT or mega out of one of them. Or should I I just get the CEN MT coming out? |
Re: Tough solid axles? As far as axles go, im usin ar60s. I bought a set of stock axles n a set of aluminum housings. Just swapped the internals over. Ive got HR diff covers, vanquish aluminum knuckles (cracked stock where steering screws are), n used stock braces. They work great n good n strong. Like i mentioned in earlier post, im runnin proline brawler wheels n proline destroyer tires. If u look here in the mega/monster truck section ive got a build thread on mine. Its scx10/ax10 based. May give u some ideas for buildin yourshttps://uploads.tapatalk-cdn.com/201...4639647880.jpghttps://uploads.tapatalk-cdn.com/201...e1a2161002.jpghttps://uploads.tapatalk-cdn.com/201...ff4c22fc84.jpghttps://uploads.tapatalk-cdn.com/201...bb60147165.jpghttps://uploads.tapatalk-cdn.com/201...17c1f2d63d.jpghttps://uploads.tapatalk-cdn.com/201...e9986f0642.jpg Sent from my SM-J327VPP using Tapatalk |
Re: Tough solid axles? Any way to make trx4 axles not portals? Sent from my SM-G955U using Tapatalk |
Re: Tough solid axles? Quote:
|
Re: Tough solid axles? Quote:
Sent from my SM-G955U using Tapatalk |
Re: Tough solid axles? Quote:
Sent from my SM-G955U using Tapatalk |
Re: Tough solid axles? Quote:
|
Re: Tough solid axles? Quote:
Sent from my SM-G955U using Tapatalk |
All times are GMT -6. The time now is 12:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com