Raptor build Just picked this up... Steel body with plastic details.. It's a 1/24 scale and I will be using the running gear from a losi micro. I plan to build an abs tonneau cover to conceal the battery and electronics in the bed. Also ordered a 1/24 trailer so I can use this to haul a micro sct. http://img.tapatalk.com/d/13/02/11/2ute5e9y.jpghttp://img.tapatalk.com/d/13/02/11/utyrutyv.jpghttp://img.tapatalk.com/d/13/02/11/u6e9yjes.jpg Sent from my Droid DNA using Tapatalk 2 |
Managed to recess the motor and trans up into the passenger compartment and only had to raise the back seat by 3/16 of an inch. Only the mounting bracket is glued, the trans still screws in place and can be easily removed with 3 screws. http://img.tapatalk.com/d/13/02/11/8usuzady.jpghttp://img.tapatalk.com/d/13/02/11/dusyte8e.jpghttp://img.tapatalk.com/d/13/02/11/4y8ujyza.jpghttp://img.tapatalk.com/d/13/02/11/tavebajy.jpg Sent from my HTC6435LVW using Tapatalk 2 |
I plan to swap out the wheels and tires for some a little smaller but here are some mockup shots with the stock losi ones... http://img.tapatalk.com/d/13/02/11/egemeha8.jpghttp://img.tapatalk.com/d/13/02/11/uhegy2a4.jpghttp://img.tapatalk.com/d/13/02/11/azuqy5ud.jpghttp://img.tapatalk.com/d/13/02/11/anytymas.jpg The receiver/esc fits perfectly under the mock engine http://img.tapatalk.com/d/13/02/11/ujameteg.jpg Sent from my HTC6435LVW using Tapatalk 2 |
Re: Raptor build That's sick! What are you thinking of getting for smaller tires/wheels? |
I plan to build a combination trans skid plate / link mount and some trim panels to fill in the middle sections. Any one know if the rc4wd nano t-rex axles are ever going to be available? Sent from my HTC6435LVW using Tapatalk 2 |
I'm still looking for the right ones... I seem to remember seeing some micky Thompson baja tires that were pretty small but have to try and find them. But I would like something like that that would be scale accurate Sent from my HTC6435LVW using Tapatalk 2 |
This is sick!! Definitely interested to see how this comes out since I love the raptor and have a micro laying around. :D Sent from my SAMSUNG-SGH-I747 using Tapatalk 2 |
Re: Raptor build baja claws would look good. Great project so far |
Should have some progress soon.. Waiting on an order of 1.8mm leds and some micro rally tires. Also picked up a 1250mah 2s lipo Sent from my HTC6435LVW using Tapatalk 2 |
Re: Raptor build wheels and tires from an xmod truck would get you close to a stock look, a little small for my liking, but it could work |
I'm hoping that the micro rally tires on the micro crawler axle will be what I'm looking for.. But if not those will be the next ones I try. Finally got in some 1.8mm leds, but still waiting on the silicone wire and resistors, and still trying to decide between the 4 link setup or some leaf springs like the 1:1 in the rear. Sent from my HTC6435LVW using Tapatalk 2 |
Re: Raptor build You should go with leaf springs because of the weight of the die-cast and because you will be using it for towing. The stock wheels and tires look cool, anyway to make them work? |
I decided to go with leafs, both for the weight and looks, now I just have to make them lol Sent from my HTC6435LVW using Tapatalk 2 |
Re: Raptor build Sick build! What plans for a motor do yu have? For tires look for some aoshima super swampers those would fit perfect! Inbetween xmod tires and losi tires. |
The motor is already mounted under the rear seat.. It's from a losi micro crawler Sent from my HTC6435LVW using Tapatalk 2 |
Got the trailer in today.. Probably will have to upgrade the wheels and axles but I like it.. http://i1353.photobucket.com/albums/...ps20ebc8cd.jpg http://i1353.photobucket.com/albums/...ps0cf26848.jpg Sent from my HTC6435LVW using Tapatalk 2 |
Re: Raptor build any progress on this old thread???? |
All times are GMT -6. The time now is 10:21 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com