ECX Barrage Double Motor Tranny I had a double whammy tranny laying around and decided to put it in the little Barrage. I like full control when crawling and this is always the easiest route. https://imagizer.imageshack.com/v2/8...922/wIPUpa.jpg https://imagizer.imageshack.com/v2/8...924/RnvDNO.jpg https://imagizer.imageshack.com/v2/8...924/ghKXbl.jpg https://imagizer.imageshack.com/v2/8...924/Ycdxkr.jpg |
Re: ECX Barrage Double Motor Tranny What ESC are you using? I can’t see And where did you said you got from this tranny? |
Re: ECX Barrage Double Motor Tranny Quote:
|
Re: ECX Barrage Double Motor Tranny Dont google double whammy tranny and expect to get anything besides porn. Ive been looking for 10minutes and havent found anything that small yet lol. |
Re: ECX Barrage Double Motor Tranny Quote:
Not sure if this is the exact same as he’s using but I’ve got this one and it’s good. |
Re: ECX Barrage Double Motor Tranny Quote:
There have been several people using a twin N20 geared motor setup in the RC4WD D90. I have seen 3D printed ones too. This one is aluminum and is really nice. This motor/ESC setup in not cheap but it is the ultimate in technical crawling control. |
Re: ECX Barrage Double Motor Tranny Quote:
|
Re: ECX Barrage Double Motor Tranny |
Re: ECX Barrage Double Motor Tranny Is it possible to run this on the stock esc? |
Re: ECX Barrage Double Motor Tranny Quote:
|
Re: ECX Barrage Double Motor Tranny Awesome. This looks like the best way to go that I’ve seen yet. Thanks for your time! |
Re: ECX Barrage Double Motor Tranny I ve got a doble tranny in my gelande 1/18 and it’s fantastic. The new transmission that rc4wd just began to sell I think that will fit in the barrage and it’s very cheap http://store.rc4wd.com/R5-118-Mini-T...V2_p_5805.html |
Re: ECX Barrage Double Motor Tranny Quote:
You can find cheaper dual motor boxes than the one I used. There are 3D printed one's out there and the N20 geared motors are dirt cheap. You could even make your own out of simple plates. It just depends on your modelling skills and desire to tinker. |
Re: ECX Barrage Double Motor Tranny I don’t mind tinkering. I’m a machinist and also do 3d printing. Cost vs. effort and time make the best option to just pay and go on sometimes though. The sumo transmission swap seems ok too but finding what I need hasn’t been easy. Well I haven’t seen anything on ebay or amazon anyway. |
Re: ECX Barrage Double Motor Tranny Quote:
If youre a machinest and like to tinker, you might want to make a transmission like I did on the "Original" D90 I built long before there was such a thing as RC4WD D90. http://www.rccrawler.com/forum/micro...nder-90-a.html https://imagizer.imageshack.com/v2/8...9/img9559s.jpg https://imagizer.imageshack.com/v2/8...5/img9556s.jpg |
Re: ECX Barrage Double Motor Tranny Well crap. Now I’m going to feel guilty for taking the lazy way out lol! That’s an awesome build man! I might just order some reduction motors on amazon and print the plates/box to hold them. Cheap is important because my 11 also has a barrage. I bought mine so I could be a guinea pig for our trucks. We are newbs to crawling. I appreciate your help. I’ll probably send a pm with some other random questions if that’s ok. |
Re: ECX Barrage Double Motor Tranny Any up date on this? |
Re: ECX Barrage Double Motor Tranny Quote:
|
Re: ECX Barrage Double Motor Tranny Quote:
Sent from my SM-G955U using Tapatalk |
Re: ECX Barrage Double Motor Tranny Quote:
|
All times are GMT -6. The time now is 09:00 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com