|
| LinkBack | Thread Tools | Display Modes |
04-10-2018, 12:37 AM | #1 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| 1957 Corvette Gasser 1/20 scale
I have decided to make an oddball little scaler out of spare parts I had lying around. I like to collect parts, so that’s not a problem. Awhile back I ran across some 1/20 scale 1957 corvette push toys on eBay, so I bought them. I started looking around at the parts I had and realized I could easily throw together a little Gasser, so that’s what I did. Anyways, here’s an inspiration pic, a pic of the original toy, and some mock-up pics.
|
Sponsored Links | |
04-10-2018, 12:44 AM | #2 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
The front axle is a 1/24 big rig axle I found off Banggood awhile back, and the front springs are off the servo savers from Trail Trekker servo’s. The rear axle is a Redcat Sumo mounted to a cut up Trekker frame, and the rear springs are from a Losi micro SCT. Here are some build picks.
|
04-10-2018, 12:47 AM | #3 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
And that’s about where she’s at now. She’s at roller status at least! Here’s a couple more pics.
|
04-10-2018, 03:32 AM | #4 |
Pebble Pounder Join Date: Jan 2013 Location: south jersey
Posts: 132
| Re: 1957 Corvette Gasser 1/20 scale
Super cool.been think something along the line of this myself.will be fast for sure
|
04-10-2018, 04:59 AM | #5 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: 1957 Corvette Gasser 1/20 scale
Nice. I’ve got a diecast c10 of similar size I’ve bought years ago as a shelf queen. This could be a cool build for it as well.
|
04-10-2018, 09:09 PM | #6 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale |
04-11-2018, 01:52 AM | #7 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
Not much work on the Gasser tonight, but I did mess around with motor placement. I’m thinking I’ll use a Losi tranny, Orlandoo steel driveshafts, and a carrier bearing I made for an old project. This way I can still use the interior. I’m still debating on whether to go brushless or not.
|
04-11-2018, 06:33 AM | #8 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: 1957 Corvette Gasser 1/20 scale
Lol. Looking good. Makes me want to drag out the half completed slot car conversion I started a few years back.
|
04-11-2018, 06:53 AM | #9 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: 1957 Corvette Gasser 1/20 scale
That's really cool!
|
04-12-2018, 10:14 AM | #10 |
Rock Stacker Join Date: Feb 2014 Location: Canada
Posts: 82
| Re: 1957 Corvette Gasser 1/20 scale
awesome project! I did something like that with a micro highroller and a revell 1/25 truck. it was pretty fun. the way you have your motor and drive shafts mounted up is way cooler though.
|
04-16-2018, 11:32 PM | #11 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
Got a little more done on this little guy today. I got the transmission and the carrier bearing in place and mounted up. I’ll give her a test run tomorrow after I charge up some batteries.
|
04-17-2018, 09:51 PM | #12 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
1st test run was a success. If I can find a cheap brushless esc I might convert it over. I have a brushless motor lying around, but no esc. A little more speed would be nice. Now it’s on to fit the interior and hide the electronics.
|
04-18-2018, 10:18 AM | #13 |
Rock Stacker Join Date: Feb 2014 Location: Canada
Posts: 82
| Re: 1957 Corvette Gasser 1/20 scale
this one has worked pretty well for me: https://hobbyking.com/en_us/hobbykin...___store=en_us |
04-18-2018, 12:25 PM | #14 | |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale Quote:
| |
04-22-2018, 10:21 PM | #15 |
Rock Crawler Join Date: Dec 2013 Location: Nevada City
Posts: 872
| Re: 1957 Corvette Gasser 1/20 scale
Well, I’m getting a little off track, but I got some wheels and tires in for another build. I just had to do some mock-ups! It’s a 1/20 scale ‘52 Chevy COE that I custom ordered off Shapeways. I’m going to build it as a hauler for the gasser (as well as all my other vehicles). But more to come on that later. |
1957 Corvette Gasser 1/20 scale - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1/12 scale 67 Corvette | Ax-10Canadian | Non Crawler RC's | 1 | 08-15-2008 11:20 AM |
| |