Nylint Ford Econoline Conversion - Misc. WPL Parts
 

I am waiting on a lot of metal pieces to come in for the Tonka RC Jeep Conversion so I started another project.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

https://farm5.staticflickr.com/4918/...89f794f2_c.jpgIMG_8566 by captaininsano1000, on Flickr

The tires are for a HBX 1/18 truck of some sort.

https://www.banggood.com/HBX-118-188...r_warehouse=CN

https://farm5.staticflickr.com/4874/...0f91ae65_c.jpgIMG_8567 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

The wheels have a 8MM hex so I used a tap and die set to thread the WPL shafts and used 8MM nuts to hold the wheel.
https://farm5.staticflickr.com/4858/...7a395cc1_c.jpgIMG_8593 by captaininsano1000, on Flickr
https://farm5.staticflickr.com/4804/...a973cebb_c.jpgIMG_8591 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

To get the right track width, I had to modify the steering knuckles to clear the wheels. The stock one is on the left, the modified one is on the right.

https://farm5.staticflickr.com/4913/...633a8228_c.jpgIMG_8599 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

My original plan was to use WPL leaf springs but I am going to have a lot of these parts left over from another build so I figured I'd use them.

https://farm5.staticflickr.com/4909/...444ec181_c.jpgIMG_8649 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

I am going to use two N20 gearmotors to power the wheels. I should have ordered N30 motors but it is too late now. They are 1000 RPM output motors. I don't know if that is going to be too fast but since these things cost $2.00, it will just reorder if needed.
https://www.aliexpress.com/item/Free...27424c4dZTkKwM

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

Very cool project! I can't wait to see it finished and running.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

That high of a speed from that small motor will create very little torque. I have the 600rpm ones that Adrian202 tried out, and it is ungodly slow but has a bit more torque. Not to mention all those metal gears are LOUD!

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

I was afraid of that but I was emotionally scarred from another motor I installed on my first Tonka RC conversion that was way to slow and had way more torque than needed. I didn't consider the noise so I guess I'll see how that goes.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

I epoxied the nuts to the threaded plastic axles to keep them from unscrewing themselves and true up the wheels as much as possible. One of them has some wobble to it but not a ton.

Suspension Partially Done
 

https://farm5.staticflickr.com/4915/...ba843764_c.jpgIMG_8878 by captaininsano1000, on Flickr

https://farm8.staticflickr.com/7873/...3345eed5_c.jpgIMG_8883 by captaininsano1000, on Flickr

https://farm8.staticflickr.com/7819/...d0386d58_c.jpgIMG_8881 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

The shocks I bought are terrible. I bought the shorter ones in the link below. They bind up really easily. I think it has to do with the offset on the upper mount.
https://www.aliexpress.com/item/1set...27424c4d5NxdCO

There are a few minor rubbing issues with the front suspension and the tires but I think it can all be dialed out.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

https://farm8.staticflickr.com/7876/...afa44eac_c.jpgIMG_8875 by captaininsano1000, on Flickr

https://farm5.staticflickr.com/4875/...84eeaa21_c.jpgIMG_8877 by captaininsano1000, on Flickr

Servo Mounting
 

I just made a couple of brackets out of misc. RC pieces. The stock pitman arm will be replaces with a metal link when it arrives from the China.

https://farm5.staticflickr.com/4904/...d78ccb09_c.jpgIMG_8987 by captaininsano1000, on Flickr

https://farm8.staticflickr.com/7820/...4e8faede_c.jpgIMG_8985 by captaininsano1000, on Flickr

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

You were indeed correct. This machine is now running and does fine on carpet and hardwood but can't climb anything. I'm going to try to find some bigger motors.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

i'm liking this build!

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

Very cool! Excited to see this one turn out.

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

This is a cool build "thumbsup" , where did you get the body?

Here's my 1:1 I had back in '85, it was a '66

Re: Nylint Ford Econoline Conversion - Misc. WPL Parts
 

The body is an old Nylint truck that belonged to my dad.

Motor Swap
 

Since my two small N30 motors didn't have enough power, I have worked up a different solution using a motor from Aliexpress bolted to a planetary gearbox.

Motor: FATJAY 2430 5800 KV Brushless motor hooked to a 10:1 planetary gearbox.
https://www.aliexpress.com/item/FATJ...27424c4dropcOJ

I am not sure if this motor/transmission combo will work but I am going to give it a try and see what happens.

https://live.staticflickr.com/65535/...5d2db043_c.jpgNylint RC Truck (2) by captaininsano1000, on Flickr

https://live.staticflickr.com/65535/...c221d819_c.jpgNylint RC Truck (1) by captaininsano1000, on Flickr